BMR Putty Grinding Robot
In stock
- BRAND:
- BMR
- ORIGIN:
- China
- Warranty:
- 12 MONTHS
- AVAILABILITY:
- SUBJECT TO AVAILABILITY
- SKU:
- BMR-Putty-Grinding-Robot
BMR Putty Grinding Robot
Raking light from a low sun is the strictest inspector on any fit-out. It finds every ridge and hollow left in the putty long after the painters have gone, and on a tower of near-identical apartments those flaws repeat floor after floor. The BMR Putty Grinding Robot tackles that variability where it begins: the grinding of putty on interior walls and ceilings. It does not depend on the stamina of an operator holding a sander overhead. The robot applies intelligent constant force through a parameterised grinding process, plans its own path, navigates the room automatically and vacuums the dust it produces into an on-board collection box, while the crew supervises it through an app.
Robots Middle East sells the BMR Putty Grinding Robot and supplies it to contractors, developers and fit-out specialists across the Middle East. Robots Middle East prepares each quotation, arranges delivery to the project or to the client's premises, and supports the machine after handover. Questions on configuration, site preparation and operation are answered by the same team that supplied the robot.
Background
Shenzhen BrightMaster Robotics and the BMR range
The robot is manufactured by Shenzhen BrightMaster Robotics Co., Ltd. and carries the BMR brand. Robots Middle East offers it within a wider family of BMR construction machines, each built for a distinct trade on the building site: coating walls, finishing and levelling concrete, and grinding or coating floors. The putty grinding robot covers the stage between plastering and painting, when the surface is given the smoothness that the final coat will either reward or expose. Construction robotics of this kind has grown because finishing trades are repetitive, physically demanding and increasingly hard to staff, while clients expect interiors that look flawless under any light.
Constant force and a parameterised process
Two ideas define this machine. The first is intelligent constant force grinding: the pressure on the wall or ceiling is held steady instead of rising and falling with the operator's posture and fatigue. The second is the parameterised grinding process setting, which ensures stable and reliable grinding quality. In practice, the grinding behaviour is defined by set parameters rather than improvised on each wall, so a result that has been approved in a sample room can be repeated across a whole floor. Automatic navigation and automatic path planning carry that consistency from one surface to the next, and vacuuming with dust collection keeps the work area cleaner than open hand sanding usually allows.
Technical Specifications
| Specification | Value |
|---|---|
| Manufacturer | Shenzhen BrightMaster Robotics Co., Ltd. |
| Total weight | 550kg |
| Overall dimensions | 942x752X1750mm |
| Moving speed | ≤0.5m/s |
| Positioning accuracy | ±2cm |
| Working height | ≤3200mm |
| Battery life | ≥4h |
| Charging time | ≤3h |
| Power supply requirements | AC220V/5kW |
| Dust collection box volume | 100L |
| Height of surmountable obstacle | ≤20mm |
| Width of surmountable trench | ≤50mm |
| Climbing angle | ≤6° |
Specifications are as published by the manufacturer and are confirmed against the datasheet at quotation. The manufacturer has not published the box contents, the grinding head type, the noise level, the sensors and navigation hardware, the IP rating or the grinding productivity; these are confirmed at quotation.
How does the BMR Putty Grinding Robot keep grinding quality consistent?
Manual putty grinding is uneven for reasons that have little to do with skill. A worker presses harder at shoulder height than at full stretch, works faster at the start of a shift than at the end, and cannot see the surface clearly through a cloud of fine dust. Each of these factors leaves its trace on the wall, and the trace only becomes obvious once paint is applied.
The BMR Putty Grinding Robot addresses each factor in turn. Constant force grinding removes the variation in pressure. The parameterised process fixes how the surface is treated, so quality does not drift with the time of day. Automatic path planning decides the route across the surface, and automatic navigation moves the robot between work positions with a positioning accuracy of ±2cm. Vacuuming and dust collection draw the debris into a 100L collection box rather than leaving it in the air and on the floor. The robot also offers automatic putty discharge as one of its listed functions. Its working height of ≤3200mm brings ceilings within reach without scaffolding towers being moved for each section.
The result is not a promise of a perfect wall on its own, as the putty application before it still matters. It does mean that the grinding stage stops being the weakest link in the finishing sequence.
What does a site need to provide for the BMR Putty Grinding Robot?
A robot of this kind works best when the site has been prepared for it, and the figures indicate what to plan for. The power supply requirement is AC220V/5kW. Battery life is ≥4h and charging time is ≤3h, so shift planning should allow for a charging window. The robot surmounts obstacles of ≤20mm and trenches of ≤50mm, and climbs gradients of ≤6°. Thresholds, service channels and temporary ramps should therefore be checked before the machine is deployed.
With a total weight of 550kg and overall dimensions of 942x752X1750mm, logistics deserve attention as well. Contractors will want to confirm lift capacity, door openings and any floor protection between storage and the rooms being worked. Robots Middle East reviews these points with the client as part of the quotation, so the machine arrives on a site that is ready for it.
Who is the BMR Putty Grinding Robot for?
The clearest fit is the interior fit-out contractor working on repetitive residential stock: apartment blocks and commercial housing schemes where the same wall and ceiling layouts recur hundreds of times and consistency is visible to every buyer. Developers who control finishing quality across several projects will value a grinding stage that can be specified and repeated rather than left to individual crews.
Office building fit-out teams are a second segment, as large open ceilings and long partition runs make overhead hand sanding particularly tiring. Specialists in western-style houses and high-specification villas form a third group, where the finish on walls and ceilings is closely scrutinised. Decoration companies looking to reduce their dependence on hard-to-recruit sanding labour, and to improve dust control on occupied or sensitive sites, complete the picture.
Buyers whose work is on floors rather than walls and ceilings should look at the BMR Floor Grinding Robot 850M and the BMR Floor Grinding Robot 850S. Teams planning to automate the step that follows grinding can consider the BMR Intelligent Coating Robot. The full range of machines for finishing work is gathered under Interior Robots.
What is the BMR Putty Grinding Robot used for?
- Apartment fit-out — grinding putty on walls and ceilings across repeated unit layouts with consistent results.
- Ordinary residences — preparing interior surfaces for paint in fine decoration projects.
- Western-style houses — achieving a smooth, uniform finish where interiors are closely inspected.
- Commercial houses — handling large volumes of finishing work in residential schemes for sale.
- Office buildings — grinding long wall runs and broad ceilings without prolonged overhead manual work.
- Industrial decoration — applying a parameterised, repeatable grinding process across standardised interior finishing.
Pricing and Availability
Robots Middle East supplies the BMR Putty Grinding Robot on quotation, prepared to the configuration and the project details you provide. Delivery, customs clearance and after-sales support are arranged together with the quotation. The offer is tailored to your site, your schedule and the scope of finishing work involved. A quotation request is available on this page.
Frequently Asked Questions
Can the robot grind ceilings as well as walls?
Yes. It is designed for putty grinding on both interior walls and ceilings, with a working height of ≤3200mm.
How long does it run on one charge?
Battery life is ≥4h and charging time is ≤3h. Shift plans should include a charging window.
How does it deal with dust?
The robot vacuums while it grinds and collects the dust in a 100L collection box, which helps keep the work area cleaner than open hand sanding.
Can the robot be controlled remotely?
Yes. APP remote operation is one of its listed functions, alongside automatic navigation and automatic path planning.
What power supply does it require?
The power supply requirement is AC220V/5kW. Robots Middle East reviews site power provision with you before delivery.
Can it cross thresholds and uneven ground on site?
It surmounts obstacles of ≤20mm and trenches of ≤50mm, and handles a climbing angle of ≤6°. Higher steps or steeper ramps should be bridged or levelled before deployment.
Where can I buy the BMR Putty Grinding Robot and what does it cost?
The BMR Putty Grinding Robot is available from Robots Middle East, which supplies it across the Middle East. Pricing is provided on quotation, based on your configuration and project requirements.
Summary
The flaws that raking light reveals on a painted wall are usually created long before painting, during a grinding stage that depends on tired arms and poor visibility. The BMR Putty Grinding Robot from Shenzhen BrightMaster Robotics turns that stage into a defined process: constant force, parameterised settings, planned paths, automatic navigation and integrated dust collection, on walls and ceilings alike. For fit-out contractors and developers working on apartments, houses and office buildings who want the surface beneath the paint to be as consistent as the paint itself, and for teams exploring the wider range of Construction Robots supplied by Robots Middle East, this page is the starting point.