PSYONIC Ability Hand Dexterous Robotic Hand
In stock
- BRAND:
- PSYONIC
- MODEL:
- ABILITY HAND
- ORIGIN:
- United States
- Warranty:
- 24 MONTHS
- AVAILABILITY:
- SUBJECT TO AVAILABILITY
- SKU:
- PSYONIC-Ability-Hand
PSYONIC Ability Hand Dexterous Robotic Hand
Most laboratory hardware is kept away from the world it studies: behind glass, on a bench, handled with care. A prosthetic hand gets no such protection. It is knocked against door frames, splashed at the sink and expected to work again the next morning. The PSYONIC Ability Hand Dexterous Robotic Hand was engineered under exactly those conditions, as a bionic hand for people with upper-limb difference. It reaches the research bench carrying that history with it: fingers that take blunt impact without breaking, spill and splash resistance, and touch sensing first designed to tell a human wearer what the hand is holding.
Robots Middle East supplies the PSYONIC Ability Hand to universities, research institutes, clinical teams and industrial developers across the Middle East. We prepare the quotation, coordinate delivery to your facility and remain your point of contact for technical support once the hand has arrived. Procurement, logistics and integration questions are therefore handled by one organisation in the region, in your time zone and with an understanding of local requirements.
Background
PSYONIC and its origins
PSYONIC is a bionic technology company based in San Diego. Founded in 2015, it develops advanced, accessible bionic systems designed to supercharge both humans and robots. That dual ambition explains much about the Ability Hand: the company did not begin with an industrial gripper and later attempt to make it lifelike. It began with a person who needs a hand for everyday life, and only afterwards opened the same device to engineers and scientists. The Ability Hand was designed as a prosthesis for people with upper-limb difference, and PSYONIC subsequently announced that it is releasing the hand for use by robotics researchers worldwide.
The consequence for buyers is that the hardware was shaped by the demands of daily wear, where weight, robustness and reliable charging matter as much as dexterity. Those priorities are visible throughout the specification.
Touch sensing as the defining technology
The Ability Hand is the world's fastest, incredibly durable, and first ever touch-sensing bionic hand. Its integrated sensors detect pressure when the hand grips an object and send a vibration to the user's arm to communicate the sensation. For a prosthesis wearer, this closes a loop that conventional bionic hands leave open: the person can perceive contact rather than relying solely on sight.
For the research version, the same sensing becomes a data source. The hand's API streams all 30 touch sensor values alongside the 6 encoder values, so a contact event is not merely felt but recorded, timestamped and available for analysis. A capability conceived to restore a sense to a human being thus becomes an instrument for studying grasping itself.
Technical Specifications
| Specification | Value |
|---|---|
| Product type | Touch-sensing bionic hand |
| Weight | 490 grams, less than the average adult human hand |
| IP rating | IP64 (spill and splash resistant) |
| Grip patterns | 32 grip patterns, of which 19 are currently pre-defined and available |
| Articulation | All 5 fingers flex and extend; the thumb rotates electrically and manually |
| Touch sensing | Integrated pressure sensors; vibration feedback to the arm |
| Durability | Each finger can handle blunt force impact without breaking |
| Charging | USB-C, in about an hour |
| Battery life | An estimated 6-8 hrs per charge |
| Third-party control systems | EMG pattern recognition, EMG direct control systems, linear transducers, force-sensitive resistors |
| Communication protocols | BLE, I2C, UART, RS485 |
| Research API: motor control (Ability Hand for research users) | Torque, velocity and position control of the 6 brushless DC motors |
| Research API: data streaming (Ability Hand for research users) | All 6 encoder values and 30 touch sensor values over Bluetooth or USB |
Specifications are as published by the manufacturer and are confirmed against the datasheet at quotation.
The manufacturer has not published the dimensions, operating voltage, payload or grip force, box contents, wrist and mounting options, or operating temperature; these are confirmed at quotation.
What makes the Ability Hand different from a conventional robot gripper?
A typical industrial gripper is optimised for one repeated task: two jaws, a fixed stroke, a predictable part. The Ability Hand approaches manipulation from the human side. All five fingers flex and extend, and the thumb rotates both electrically and manually, which allows the hand to form the varied shapes that everyday objects demand. PSYONIC offers 32 grip patterns, 19 of which are currently pre-defined and available, giving users a library of grasps rather than a single closing motion.
Robustness is the second distinction. Many dexterous research hands are delicate instruments that teams hesitate to let collide with anything. Here, each finger can handle blunt force impact without breaking, and the IP64 rating means spills and splashes are part of the expected operating environment rather than a reason for repair. At 490 grams, the hand is also lighter than the average adult human hand, a figure that matters both to a prosthesis wearer and to anyone mounting an end effector on a robot arm with a limited payload budget.
The third difference is feedback. Pressure sensing with vibration output gives a human user an awareness of contact, while the research API makes 30 touch sensor values available for software. Few grippers treat touch as a primary output rather than an optional accessory.
What does the research version of the Ability Hand add?
The research version opens the hand to direct programmatic control. Its API enables torque, velocity and position control of the 6 brushless DC motors, so researchers can choose the control mode that suits their experiment, from compliant torque-based grasping to precise positional trajectories. At the same time, all 6 encoder values and 30 touch sensor values stream over Bluetooth or USB, providing the state information needed for closed-loop control, data collection and learning-based methods.
The hand also supports BLE, I2C, UART and RS485 communication protocols, which gives integrators several routes into an existing control architecture. For a laboratory, this means the device can be treated not as a closed product but as a sensorised, controllable platform.
Who is the PSYONIC Ability Hand for?
Prosthetics clinicians and rehabilitation teams are the hand's original audience. For them, the prosthesis version is the relevant configuration: compatibility with EMG pattern recognition, EMG direct control systems, linear transducers and force-sensitive resistors means the hand works with most third-party control systems already used in fitting practice, and USB-C charging in about an hour suits daily routines.
Robotics researchers are better served by the Ability Hand for research users, whose API exposes motor control and sensor streams. University laboratories studying dexterous manipulation, tactile perception or human-robot interaction will find that this version supports measurement as well as movement. Teams comparing it with other end effectors can browse our Robot Hands category, and those assembling a complete research setup may also consider our Research Robots range.
Industrial developers and system integrators exploring human-like manipulation form a third group. We recommend that these buyers share details of their robot arm and control interface with Robots Middle East at an early stage, so that the integration can be planned alongside the order.
What is the PSYONIC Ability Hand used for?
- Upper-limb prosthetics: restoring grasping and touch awareness for people with upper-limb difference.
- Dexterous manipulation research: studying multi-finger grasps with a library of pre-defined grip patterns.
- Tactile sensing studies: analysing contact through streamed touch sensor values during real grasps.
- Control algorithm development: testing torque, velocity and position control strategies on brushless DC motors.
- Human-machine interfaces: evaluating EMG-based and sensor-based control methods for bionic devices.
- Robot learning data collection: recording encoder and touch data to train and validate manipulation models.
Pricing and Availability
Robots Middle East supplies the PSYONIC Ability Hand on a quotation basis, so that the offer reflects the version you need, whether the prosthesis or the research configuration, and the use you intend. Please tell us about your application, your control system and, where relevant, the robot arm you plan to use, and we will prepare a quotation tailored to your project. Delivery, customs and support are arranged with the quotation, so that you receive one coordinated proposal. To begin, simply use the quotation request available on this page.
Frequently Asked Questions
Does the Ability Hand provide a sense of touch?
Yes. Integrated sensors detect pressure when the hand grips an object and send a vibration to the user's arm to communicate the sensation. In the research version, 30 touch sensor values can also be streamed to software.
How is the hand charged?
The hand charges using USB-C in about an hour. Battery life per charge is listed in the specification table above.
Is the hand resistant to water?
The Ability Hand is IP64 rated, with spill and splash resistance for everyday use.
Which control systems is the hand compatible with?
It works with most third-party systems, including EMG pattern recognition, EMG direct control systems, linear transducers and force-sensitive resistors.
Can researchers control the motors directly?
Yes. The research version's API enables torque, velocity and position control of the 6 brushless DC motors and streams encoder and touch data over Bluetooth or USB.
How many grip patterns does the hand offer?
PSYONIC offers 32 grip patterns, of which 19 are currently pre-defined and available for use. All 5 fingers flex and extend, and the thumb rotates electrically and manually.
Where can I buy the PSYONIC Ability Hand Dexterous Robotic Hand and what does it cost?
You can obtain it from Robots Middle East, which supplies the hand across the Middle East. Pricing is provided in a tailored quotation that includes delivery, customs and support; please submit a request through this page.
Summary
The PSYONIC Ability Hand was built for a life outside the laboratory, where hands are dropped, splashed and used all day, and that origin is precisely what makes it valuable inside one. It combines five articulated fingers, a rotating thumb, a broad library of grip patterns and touch sensing within a hand lighter than the average adult human hand. For clinicians, it is a prosthesis that lets the wearer perceive contact; for researchers, the research version turns that same perception into data and opens the motors to direct control. Robots Middle East quotes, delivers and supports the hand across the region, and for anyone ready to put a durable, sensing hand to work, this page is the starting point.