SEER Robotics SJV-SW600 (SJV-SW600)

Watch an experienced waiter cross a crowded dining room and you will notice that his shoulders turn with every gap he threads, while the tray in his hand hardly moves. The SEER Robotics SJV-SW600 (SJV-SW600) brings that discipline to intralogistics. It is a Laser SLAM Rotary Lifting Robot in which the robot body and the lifting plate rotate separately, so the chassis can steer wherever the route demands while the lifted shelf or rack keeps the orientation the next workstation expects. With a rated load of 600 kg on a lifting platform of 924 x 650 mm, it carries genuine weight, and its integrated SRC controller handles steering and the rotation of the lifted goods as one synchronised motion rather than two separate tasks.

Robots Middle East supplies the SJV-SW600 to warehouses, distribution centres, factories and logistics operators across the Middle East. Robots Middle East prepares the quotation, arranges delivery to your site and supports the robot once it is in service, so your team works with a single regional partner from the first enquiry to daily operation.

Background

SEER Robotics and the Robot Brain

SEER Robotics (06106.HK) is a platform-based embodied intelligent robotics company built around what it calls the Robot Brain, and it serves more than 2,500 customers worldwide with intelligent robotics solutions. The platform approach matters to buyers because control and navigation are treated as the core of the business, with individual robots built around that core rather than designed in isolation. The SJV-SW600 sits within the manufacturer's range of lifting robots, which you can compare in our Lifting Robots category.

A lifting robot with a turning deck

Lifting robots, as a class, are low mobile platforms that drive underneath a shelf unit, rack or cart, raise it slightly off the floor and carry it to wherever it is needed, typically a picking station, a packing bench or a line-side position. They are widely used in goods-to-person fulfilment and in factories that move kitted parts between processes. The SJV-SW600 adds a decisive refinement to that concept: its lifting plate turns independently of the chassis. The manufacturer describes this spin function as the means by which the robot moves through tight spaces such as narrow aisles and densely packed shelving, and the SRC controller coordinates both movements at the same time. The result is a robot that can present a load to an operator on the correct face without a separate turning manoeuvre by the whole machine and its cargo.

Technical Specifications

Specifications are as published by the manufacturer and are confirmed against the datasheet at quotation.

SEER Robotics has not published the IP rating, the controller model, the communication interfaces, the package contents, the noise level or the safety certifications for this robot; these points are confirmed at quotation.

How does separate rotation help the SJV-SW600 in narrow aisles?

In a conventional lifting robot, the load turns whenever the robot turns. That is acceptable in open areas, but in a dense storage block it means every change of direction sweeps the shelf unit through the surrounding space, and the shelf may arrive at a workstation facing the wrong way. The SJV-SW600 separates those two questions. The chassis rotates to follow the route, while the lifting plate can hold or adjust the orientation of the load, with the SRC controller synchronising both.

The practical consequence shows in the layout figures. The robot requires a minimum aisle width of 790 mm, has a footprint of 950 x 650 mm and a rotation diameter of 1015 mm. At 250 mm high, it is designed to pass beneath shelving, and its 60±2 mm lifting stroke is enough to raise a unit clear of the floor for transport without a tall mast or fork assembly. For planners, this means storage can be arranged around the flow of goods and the faces that pickers need to reach, rather than around the turning behaviour of the vehicle.

Precision completes the picture. A navigation position accuracy of ±5 mm and an angle accuracy of ±0.5° allow the robot to return to docking points and pick-up positions consistently, which is what makes repeatable, unattended cycles possible.

Which navigation methods and safety features does the SJV-SW600 offer?

Laser SLAM is the robot's primary navigation type. In general, SLAM navigation builds a map from the natural features of a building, such as walls, columns and fixed equipment, so a site can often be commissioned without extensive floor infrastructure. The SJV-SW600 also supports QR code and laser reflector navigation, which gives integrators options where an area is visually repetitive, changes frequently, or calls for fixed reference points.

The robot carries two lidars: a navigation laser at the front and an obstacle avoidance laser at the rear, giving it awareness in both directions of travel. As standard, it is fitted with an E-stop button, a speaker, an ambient lamp and a bumper strip, so people working nearby can hear and see the robot and stop it immediately if necessary.

Who is the SEER Robotics SJV-SW600 for?

The SJV-SW600 suits operators who move shelving, racks or carts rather than individual cartons, and who need those loads delivered in a defined orientation. E-commerce and retail fulfilment centres running goods-to-person picking are an obvious fit, as are third-party logistics providers that handle varied client inventories in compact storage blocks. Manufacturers that stage kitted parts or work-in-progress on mobile racks can use it to feed assembly cells, where the correct face of the rack must be presented to the operator.

It is equally relevant to sites that operate long shifts. The comprehensive battery life of 8 h, a charging time of no more than 2 h from 10% to 80%, and support for automatic as well as manual charging allow a fleet to keep working with minimal human intervention. Facilities where space is at a premium will value the 790 mm minimum aisle width.

Where the task is to raise pallets onto racking rather than to lift a shelf unit a short distance and carry it, a forklift-type robot is the more natural choice, and the SEER Robotics SlimStack 2000 Two Ton Autonomous Forklift (SBA-400EU) is worth comparing.

What is the SEER Robotics SJV-SW600 used for?

1. Goods-to-person picking: bringing shelf units to pick stations with the required face turned towards the picker.
2. Line-side supply: delivering racks of components to assembly positions in the orientation the workstation needs.
3. Dense storage handling: moving shelving through narrow aisles and closely packed storage blocks.
4. Work-in-progress transfer: carrying mobile racks between production steps without manual pushing.
5. Packing and dispatch staging: positioning carts at packing benches and outbound areas in a repeatable layout.
6. Multi-shift intralogistics: running continuous transport cycles with automatic charging between tasks.

Pricing and Availability

Every deployment of a lifting robot depends on the site: the floor plan, the shelving to be moved, the number of robots and the integration with existing systems. For that reason, Robots Middle East prepares an individual quotation for the SJV-SW600 based on your requirements. Delivery, customs clearance and after-sales support are arranged together with the quotation. To begin, please use the quotation request available on this page.

Frequently Asked Questions

What load can the SJV-SW600 carry?

The rated load is 600 kg. The lifting platform measures 924 x 650 mm, and the maximum lifting stroke is 60±2 mm.

How narrow an aisle can the SJV-SW600 work in?

The minimum aisle width is 790 mm. Because the body and lifting plate rotate separately, the robot can change direction without turning the load with it.

How long does the SJV-SW600 run on a charge?

Comprehensive battery life is 8 h from a 48 V / 24 Ah lithium iron phosphate battery. Charging from 10% to 80% takes no more than 2 h, either manually or automatically.

Does the SJV-SW600 need markers on the floor?

Its primary navigation type is Laser SLAM, which works from the features of the building. QR code and laser reflector navigation are also supported where a site benefits from them.

What operating environment is the SJV-SW600 designed for?

It operates at ambient temperatures from 0°C to 50°C and relative humidity from 10% to 90%, without compression or condensation.

How fast does the SJV-SW600 travel?

It reaches 1.5 m/s when fully loaded and 2 m/s when unloaded.

Where can I buy the SEER Robotics SJV-SW600 and what does it cost?

Robots Middle East supplies the SJV-SW600 across the Middle East. The cost depends on your configuration and site, so please request a quotation from this page.

Summary

Like the waiter whose tray stays level while he weaves between tables, the SEER Robotics SJV-SW600 lets the vehicle and the load follow different instructions at the same moment. Its separately rotating body and lifting plate, synchronised by the integrated SRC controller, combine with a 600 kg rated load, a 790 mm minimum aisle width, Laser SLAM navigation with QR code and reflector options, and dual lidars front and rear. For operators who need shelves and racks to arrive at the right place and facing the right way, supplied and supported by Robots Middle East, this page is the starting point.