SEER Robotics SSS-2000EU (SSS-2000EU)

Two tonnes on the forks and ten millimetres of tolerance at the rack face: these two numbers pull in opposite directions, and the SEER Robotics SSS-2000EU (SSS-2000EU) is engineered to reconcile them. It is an autonomous stacker forklift that carries a rated 2000 kg on open pallets. It navigates by Laser SLAM to a position accuracy of ±10 mm and lifts to either 1600 mm or 3000 mm, depending on the version chosen. For a site that moves heavy unit loads but cannot afford a misplaced pallet, the value lies less in any single figure than in the way the figures sit together.

Robots Middle East sells the SSS-2000EU and supplies it to organisations across the Middle East, including distribution centres, manufacturing plants and third-party logistics operators. Each quotation is prepared against the buyer's required lifting height, fork width and site conditions. Robots Middle East remains your point of contact for delivery and for after-sales support once the forklift is in service.

Background

SEER Robotics and the Robot Brain

SEER Robotics (06106.HK) is a platform-based embodied intelligent robotics company built around the Robot Brain, and it serves more than 2,500 customers worldwide with intelligent robotics solutions. Its range covers several families of autonomous forklift, including stackers, counterbalance trucks and omnidirectional designs, so the SSS-2000EU is one option within a broader line of material-handling robots rather than a stand-alone experiment. Autonomous forklifts of this kind are generally deployed where pallet movements are frequent, repetitive and predictable. Typical examples are the shuttle between a production line and a buffer store, or the replenishment of racking from a goods-in area. In such settings a driverless machine can run a scheduled routine across shifts, and staff are freed for tasks that need judgement.

Perception: Laser SLAM, lidar and pallet recognition

The SSS-2000EU locates itself by Laser SLAM and carries a 1+3 lidar arrangement. It supports 360° wide-range scanning and is equipped with 2D safety avoidance lasers, distance sensors and pallet recognition cameras. On the recognition side, the forklift identifies pallets, racks and cages in different colours and sizes from multiple angles, which allows it to approach and engage a load without relying on a perfectly squared presentation. The result is a machine that holds ±10 mm in position and ±0.5° in angle while it finds its way. That matters most at the moment the forks enter a pallet or set one down on a beam.

Technical Specifications

Specifications are as published by the manufacturer and are confirmed against the datasheet at quotation.

The manufacturer has not published the net weight of the battery, the IP rating, the contents of the box, the noise level, the wireless connectivity standard or the software and fleet system compatibility; these points are confirmed at quotation.

How does the 1600 mm version differ from the 3000 mm version?

Both versions share the same rated load of 2000 kg, the same 600 mm load centre distance, the same forks and the same navigation package, so the choice is driven by the height of your storage rather than by the weight of your loads. The 1600 mm version stands 1995 mm tall and weighs 950 kg with its battery. It suits floor-to-first-beam work, stacking onto low racking and feeding conveyors or work cells. The 3000 mm version reaches higher beam levels and stands 2223 mm tall at 1175 kg. Its extra height should be checked against door openings, mezzanine undersides and any overhead services along the route. The footprint of 1724 x 1039 mm is common to both, so aisle planning based on the 1336 mm minimum turning radius applies equally to either machine.

What does open-pallet stacking demand from an autonomous forklift?

An open pallet gives the forks a clear entry, but it still has to be found, squared up and lifted cleanly. The SSS-2000EU addresses this in three stages. First, Laser SLAM brings the machine to the pick face within ±10 mm and ±0.5°. Next, the pallet recognition cameras and AI recognition identify the pallet, rack or cage in front of it, whatever its colour or size and from multiple angles. Finally, the fork outer width can be specified at 555, 600 or 680 mm to match the pallets in circulation. Safety is handled by the 2D safety avoidance lasers and distance sensors, with braking distances of no more than 40 cm at 1 m/s and no more than 50 cm at 1.5 m/s. The robot has passed CE certification (ISO3691-4:2023), the standard that addresses driverless industrial trucks and their systems. For operations planning continuous shifts, the 24V / 210 Ah lithium iron phosphate battery provides a comprehensive battery life of 10 h, and a 10% to 80% recharge takes 2 h to 2.5 h.

Who is the SEER Robotics SSS-2000EU (SSS-2000EU) for?

The first group is warehouse and distribution operators who handle heavy unit loads on open pallets and want the stacking cycle to run on a schedule rather than around driver availability. Manufacturers are a second group, particularly those moving raw materials or finished goods between production and storage, where the same short routes are repeated many times a shift. Third-party logistics providers may also value the customisation of fork width, robot height, colour and logo, which allows a fleet to be matched to a client's pallets and presented in a client's livery.

Buyers should match the version to the racking: the 1600 mm version for low-level stacking and line-side delivery, the 3000 mm version where pallets go onto higher beams. The ambient range of 0℃ to 50℃ with 10% to 90% relative humidity, without condensation, should be compared with the conditions inside the building where the forklift will operate. If your loads, pallet types or lifting heights call for a different design, the wider Stacker Forklifts category includes other SEER machines, such as the SEER Robotics SlimStack 1500 Automated Forklift (SSS-1500EU). Our Factory Robots range covers automation beyond pallet handling.

What is the SEER Robotics SSS-2000EU (SSS-2000EU) used for?

1. Rack replenishment: placing open pallets onto racking beams up to the lifting height of the chosen version.
2. Goods-in transfer: moving received pallets from the dock area to buffer or storage locations.
3. Line-side supply: delivering materials to production cells on a repeatable, scheduled route.
4. Finished goods removal: collecting completed pallets from the end of a line and taking them to dispatch staging.
5. Cage and rack handling: engaging racks and cages as well as pallets, using the forklift's AI recognition.
6. Multi-shift operation: running long working periods on a lithium iron phosphate battery with fast partial recharging.

Pricing and Availability

Robots Middle East supplies the SSS-2000EU on quotation, prepared for your chosen lifting height, fork outer width and any customisation of height, colour or logo. Delivery, customs and support are arranged with the quotation, so the commercial terms reflect the actual destination and the service you require. To begin, share your load profile, racking heights and site details with our team using the quotation request available on this page.

Frequently Asked Questions

What is the rated load capacity of the SSS-2000EU?

The rated load capacity is 2000 kg (4409.24 lb) at a load centre distance of 600 mm (23.62 in). This applies to both the 1600 mm and the 3000 mm lifting height versions.

How does the SSS-2000EU navigate?

It uses Laser SLAM navigation with a 1+3 lidar arrangement, achieving a navigation position accuracy of ±10 mm and an angle accuracy of ±0.5°.

Which pallets can it handle?

The SSS-2000EU is designed for open pallets, and its AI recognition identifies pallets, racks and cages in different colours and sizes from multiple angles. The fork outer width is available at 555, 600 or 680 mm.

How long does the battery last, and how quickly does it charge?

The 24V / 210 Ah lithium iron phosphate battery gives a comprehensive battery life of 10 h. Charging from 10% to 80% takes 2 h to 2.5 h.

Is the SSS-2000EU certified?

Yes. The robot has passed CE certification (ISO3691-4:2023) and other related certifications.

Can the forklift be customised?

SEER Robotics supports customisation of fork width, robot height, colour and logo. Robots Middle East confirms the available options when preparing your quotation.

Where can I buy the SEER Robotics SSS-2000EU (SSS-2000EU) and what does it cost?

You can buy the SSS-2000EU from Robots Middle East, which supplies it across the Middle East. The cost depends on the version, configuration and delivery destination, so please request a quotation and our team will prepare one for your project.

Summary

The SEER Robotics SSS-2000EU (SSS-2000EU) brings together two demands that rarely sit comfortably side by side: the mass of a two-tonne pallet and the precision of a ±10 mm placement. Laser SLAM, a 1+3 lidar arrangement, pallet recognition cameras and AI recognition provide the precision. A 2000 kg rated load, a choice of 1600 mm or 3000 mm lifting height and a lithium iron phosphate battery rated for 10 h provide the capacity. CE certification to ISO3691-4:2023 and short braking distances complete the case for a safe deployment. For organisations across the Middle East that want to evaluate this stacker with Robots Middle East, this page is the starting point.