SIASUN FP95-50 (FP95-50)

Two questions decide whether a tote robot earns its place on a busy floor. Does it stop exactly where the station expects it? Can it reach the level where the stock actually sits? A machine that answers only one of them leaves people to finish the job by hand. The SIASUN FP95-50 (FP95-50) is a tote handling mobile robot that answers both in a single platform. It combines precise navigation with a lifting mechanism and fast, stable performance, so that a container is presented at the height and position where the next step of the process begins, rather than simply left somewhere in the right aisle.

Robots Middle East sells the SIASUN FP95-50 (FP95-50) and supplies it to warehouses, distribution centres and manufacturing sites across the Middle East. Each quotation is prepared around the customer's layout, carriers and workflow, and Robots Middle East coordinates delivery, commissioning and after-sales support throughout the region.

Background

SIASUN and its mobile robot family

SIASUN is a robotics manufacturer whose mobile robot range covers several distinct duties. Alongside tote handling robots such as the FP95-50 and the FP85-50, the range includes forklift mobile robots for pallet work and heavy-duty mobile platforms for large, bulky loads. That breadth matters to buyers who are planning automation in stages. A site can automate both pallet movements and tote movements with equipment from a single manufacturer, under one approach to fleet operation and with one point of contact for support. The complete range is gathered in the Mobile Robots category.

A modular approach to tote handling

SIASUN builds its tote handling robots on a modular design with various components. As a result, the same base platform adapts to a wide range of carriers and material transport needs across different industries. A site does not have to standardise on a single container before automating. Instead, the robot is configured for the totes, bins and boxes already in circulation. The manufacturer pairs this flexibility with advanced navigation modes and a simple, intuitive interface intended for quick onboarding, which shortens the time between commissioning and productive operation. Safety is part of the concept from the outset. The robot complies with international safety standards and uses multi-layer obstacle avoidance together with robust load and material detection.

Technical Specifications

Specifications are as published by the manufacturer and are confirmed against the datasheet at quotation.

The manufacturer has not published the dimensions, weight, battery capacity, charging time, travel speed, safety sensor configuration, ingress protection rating, operating temperature, power supply voltage, wireless connectivity or the contents of the delivery; Robots Middle East confirms these at quotation.

How does the SIASUN FP95-50 find its way and position itself?

The FP95-50 offers two navigation methods, Laser SLAM and QR-Code, and the choice between them shapes how a project is installed. Laser SLAM builds a map of the environment from its natural features, such as walls, racking and columns. The robot then locates itself within that map without markers on the floor. This suits sites where the layout changes from season to season, or where the floor cannot easily be marked. QR-Code navigation relies on codes fixed to the floor as reference points. It gives the robot a defined grid to follow and suits areas where routes are fixed and repeatability is the priority. Offering both methods lets a site choose per area, or start with one and adapt later.

Arrival matters as much as the route itself. The FP95-50 has a positioning accuracy of ± 10mm/±1°, and this figure is what allows a tote to be lifted from or placed onto a rack position or workstation without manual correction. The robot travels forward and in reverse, turns, and rotates in place. In-place rotation is particularly valuable where aisles are narrow and there is no room for a wide turning manoeuvre. It lets the robot square itself to a shelf face before it begins to lift.

What does the lifting range mean for a storage operation?

The parameter table gives the FP95-50 a lifting height of 300-4000 mm and a rated load of 250 kg. In practice, that range covers low positions near the floor, such as conveyor infeeds and picking benches, as well as upper storage levels that would otherwise need a ladder, a reach truck or a dedicated lift. The robot's ability to make use of height is what makes its contribution to storage density meaningful. Racking can be used vertically instead of being limited to the levels a person can comfortably reach.

Throughput is the other half of the argument. SIASUN positions its tote handling robots for sorting at very high throughput, reliable handling of high-volume fast movers and storage of irregular items. Fast movers are the lines that generate the most walking in a manual operation, so automating their retrieval relieves the busiest part of the day. A typical endurance of 6-8 hours means that charging can be planned around the operating pattern of the site.

Who is the SIASUN FP95-50 for?

The FP95-50 is aimed at operations where containers, rather than pallets, are the unit of work. E-commerce and retail fulfilment centres are an obvious fit, because order lines arrive in large numbers and fast movers dominate the picking load. Third-party logistics providers benefit from the modular design, since a single robot type can serve customers who use different totes and boxes. Manufacturers benefit as well, particularly in electronics and component-intensive assembly, where parts travel in bins between the stores and the line and need to arrive at a precise position next to the operator.

Buyers who are weighing up tote handling robots should also look at its sibling, the SIASUN Tote-Handling Mobile Robot (FP85-50). Robots Middle East can advise on which of the two versions suits the site's storage heights and container types. Where the load is a full pallet rather than a tote, a forklift mobile robot such as the SIASUN Forklift Mobile Robot (D15S-1) is the more appropriate class of machine, and the wider Logistics Robots category shows the alternatives.

What is the SIASUN FP95-50 used for?

1. Goods-to-person picking: bringing totes from storage to picking stations so that operators no longer walk the aisles.
2. High-throughput sorting: moving containers between sortation points in operations with very high order volumes.
3. Fast-mover replenishment: keeping high-volume lines supplied at forward pick locations throughout the shift.
4. High-bay tote storage: placing and retrieving totes at upper rack levels to make better use of vertical space.
5. Line-side supply: delivering bins of components from the stores to assembly workstations in manufacturing.
6. Irregular item storage: handling and storing items that do not suit standard shelving or conveyor systems.

Pricing and Availability

The SIASUN FP95-50 (FP95-50) is supplied on a quotation basis, because every installation depends on its own carriers, rack heights, navigation method and fleet size. To begin, please share your layout, container types and expected throughput with Robots Middle East, and the team will prepare a proposal for your site. Delivery, customs clearance and technical support are arranged together with the quotation. The quotation request form for this robot is available on this page.

Frequently Asked Questions

What kind of robot is the SIASUN FP95-50?

It is a tote handling mobile robot that transports and lifts containers, combining precise navigation with fast, stable performance. Its modular design allows it to adapt to different carriers and material transport needs.

Which navigation methods does the FP95-50 support?

The robot supports Laser SLAM and QR-Code navigation. Laser SLAM works from a map of the site's natural features, while QR-Code navigation follows codes fixed to the floor.

How accurately does the FP95-50 position itself?

The positioning accuracy is ± 10mm/±1°. This allows totes to be placed at rack positions and workstations without manual correction.

What load and lifting height does it handle?

The FP95-50 has a rated load of 250 kg and a lifting height of 300-4000 mm. This lets it serve both low workstations and upper rack levels.

How long does it operate between charges?

The typical endurance is 6-8 hours. This allows charging to be scheduled around the shift pattern of the site.

Is the FP95-50 safe to operate near people?

The robot complies with international safety standards and uses multi-layer obstacle avoidance together with robust load and material detection. These measures are designed to support operation in areas shared with staff.

Where can I buy the SIASUN FP95-50 (FP95-50) and what does it cost?

Robots Middle East supplies the FP95-50 across the Middle East. The cost depends on the configuration and scope of your project, so please request a quotation through this page.

Summary

A tote robot proves its worth at the two points where manual handling usually takes over again: the exact stop and the reach to height. The SIASUN FP95-50 (FP95-50) addresses both. Laser SLAM and QR-Code navigation, a positioning accuracy of ± 10mm/±1° and in-place rotation bring it squarely to the shelf face. A lifting height of 300-4000 mm and a rated load of 250 kg then let it present the container where the next task begins. Its modular design adapts to the carriers a site already uses, and its safety concept supports operation in shared spaces. For warehouses, fulfilment centres and production sites that want containers to arrive in the right place and at the right height, without a person finishing the job, this page is the starting point.