SIASUN SN10A-12/0.90 (SN10A-12/0.90)

Precision and toughness rarely share a bench. A robot built for fine assembly is usually kept away from coolant, dust and spray, while a robot built to survive those conditions is seldom trusted with tight tolerances. The SIASUN SN10A-12/0.90 (SN10A-12/0.90) is designed to close that gap: a compact desktop robot that pairs ±0.03mm repeatability with an IP67-rated wrist, a 12kg payload and a 907mm reach, so that one cell can move from careful placement to messier finishing work without changing machines.

Robots Middle East sells the SIASUN SN10A-12/0.90 to manufacturers, integrators and research facilities across the Middle East. Robots Middle East prepares the quotation, arranges delivery to your site and provides support after installation, working with you to make sure the configuration suits your process before any order is placed.

Background

SIASUN and its engineering lineage

SIASUN is a Chinese manufacturer of industrial robots and automation systems, and its work rests on over two decades of engineering validation and thousands of project experiences. That history matters to a buyer because it shapes how a product family is developed: lessons from earlier installations feed into the design of later robots, and a broad portfolio means that a desktop model sits alongside larger articulated arms, collaborative robots and complete process solutions. The SN10A series is the company's new generation of desktop robots, and it is part of the wider range of SIASUN Industrial Robots offered through our store.

Positioning and core technology

SIASUN presents the SN10A series around three qualities: high performance, easy maintenance and a compact structure. The robot is equipped with brand-new, independently developed core components and algorithms, and this combination delivers high precision, high protection, high speed and high rigidity. The design is modular, which allows the robot to accommodate a wider range of application scenarios while reducing maintenance costs. For the integrator, the practical consequence is a robot intended to be reconfigured as production changes, rather than one dedicated to a single task for its entire service life.

Technical Specifications

Specifications are as published by the manufacturer and are confirmed against the datasheet at quotation.

The manufacturer has not published the weight, dimensions, power supply, rated power, maximum speed, joint ranges, controller model, mounting options, operating temperature, the protection rating of parts other than the wrist or what is included in the box; Robots Middle East confirms these details with the quotation.

What makes the SN10A-12/0.90 suited to demanding workcells?

The answer lies in how its published figures work together. A repeatability of ±0.03mm places the robot in the territory of precise placement, fitting and inspection tasks, where a part must arrive at the same point cycle after cycle. On its own, that would describe many bench-top robots. What changes the picture is the IP67 rating at the wrist, the part of the arm closest to the workpiece and therefore most exposed to dust, debris and liquids. Grinding, polishing and some welding processes generate exactly that kind of contamination, and protection where the tool meets the work is what allows a precise robot to take on such tasks.

The 12kg payload and 907mm reach complete the picture. Together they give room for a meaningful end effector, such as a gripper, a spindle or a sensor head, plus the part being handled, within an envelope that still fits a compact cell. SIASUN adds high rigidity to the list of design goals, which is relevant wherever process forces act on the tool, as they do when surfaces are ground or polished.

Integration is the other half of the argument. The robot body comes standard with multiple air lines, and its signal cables are designed to meet diverse requirements for end effectors and grippers. Routing air and signals through the arm reduces loose hoses and external cabling, which are a frequent source of snagging and wear in compact cells. On the control side, compatibility with TCP/IP, Modbus TCP, EIP and Profinet means the robot can be connected to the fieldbus networks already common in factories, rather than requiring a gateway or a change of plant standard.

How does the modular design affect ownership?

For many buyers, the purchase decision is less about the first installation than about the years that follow. The modular design of the SN10A series reduces maintenance costs while widening the range of applications the robot can serve. In practice, a modular approach generally simplifies servicing and allows a cell to be repurposed when a product line changes, which protects the investment when production volumes or product designs shift. Easy maintenance is one of the three qualities the manufacturer places at the centre of the series, alongside performance and compactness, and it is a sensible priority for facilities where downtime carries a direct cost. Robots Middle East can discuss service arrangements and spare parts as part of the quotation.

Who is the SIASUN SN10A-12/0.90 for?

The robot suits manufacturers that need precise, repeatable motion in a compact footprint, particularly in electronics, light engineering, metal parts and consumer goods, where small and medium components are handled, assembled or finished. Its protected wrist makes it a reasonable candidate for facilities that want to automate finishing tasks such as grinding and polishing, where contamination would rule out a less protected robot.

System integrators form a second group. The standard air lines, the signal cabling for end effectors and the support for four common fieldbus protocols make the robot straightforward to build into a turnkey cell, and the modular design helps when the same platform is offered to several clients with different processes.

Training centres, technical colleges and research laboratories are a third group. A desktop robot that runs industrial protocols gives students and engineers experience with equipment that mirrors what they will meet on the factory floor.

The SN10A series also includes the SN10A-10/1.15. Buyers weighing the two versions for a particular balance of payload and reach can ask Robots Middle East to set out the differences in the quotation. Buyers who need larger arms, explosion-protected models or complete process cells can browse the wider Industrial Robots category.

What is the SIASUN SN10A-12/0.90 used for?

1. Handling – moving components between conveyors, fixtures and trays within a compact cell.
2. Welding – guiding a welding tool along repeatable paths on small and medium parts.
3. Assembly – placing and fitting components where consistent positioning is essential.
4. Loading and unloading – tending machine tools and test stations to keep them working between operator interventions.
5. Inspection – presenting parts to cameras or sensors, or carrying a sensor head over the workpiece.
6. Grinding and polishing – finishing surfaces in conditions where the protected wrist is a practical advantage.

Pricing and Availability

The cost of a robotic cell depends on the configuration, the end effectors, the controller arrangement and the integration work involved, so Robots Middle East prices the SIASUN SN10A-12/0.90 by quotation. Tell us about your application, the parts you handle and the process you intend to automate, and we will prepare an offer that reflects your requirements. Delivery, customs clearance and after-sales support are arranged with the quotation. To begin the process, use the quotation request available on this page.

Frequently Asked Questions

What payload and reach does the SN10A-12/0.90 offer?

The SN10A-12/0.90 carries a payload of 12kg and has a reach of 907mm. These figures apply to this version of the SN10A series.

How precise is the robot?

The robot has a repeatability of ±0.03mm, which suits assembly, inspection and other tasks where parts must be positioned consistently.

Is the robot protected against dust and liquids?

The wrist is rated IP67. Protection at the point where the tool meets the work is what allows the robot to take on processes such as grinding and polishing.

Which communication protocols are supported?

The robot is compatible with TCP/IP, Modbus TCP, EIP and Profinet, which allows it to connect to the fieldbus networks found in most factories.

Can I connect grippers and pneumatic tools easily?

Yes. The robot body comes standard with multiple air lines, and its signal cables are designed for end effectors and grippers, so tooling can be connected without extensive external cabling.

Which tasks is the robot designed for?

The SN10A-12/0.90 is designed for handling, welding, assembly, loading and unloading, inspection, and grinding and polishing. Its modular design allows the same robot to be redeployed as these needs change.

Where can I buy the SIASUN SN10A-12/0.90 and what does it cost?

You can buy the SIASUN SN10A-12/0.90 from Robots Middle East, which supplies it across the Middle East. The price depends on your configuration and is set out in a quotation, which you can request on this page.

Summary

The SIASUN SN10A-12/0.90 answers a familiar dilemma on the factory floor: the choice between a robot precise enough for fine work and one tough enough for dirty work. With ±0.03mm repeatability, an IP67-rated wrist, a 12kg payload and a 907mm reach, it brings both qualities into a compact desktop format. Standard air lines, end-effector cabling and support for TCP/IP, Modbus TCP, EIP and Profinet simplify integration, while the modular design keeps maintenance costs down and allows the cell to change with production. Backed by SIASUN's two decades of engineering validation and supplied with quotation, delivery and support by Robots Middle East, it is a robot worth evaluating for handling, assembly, inspection and finishing applications alike. If you are planning a cell where precision and protection must coexist, this page is the starting point.