SIASUN Industrial Robot Arm With 580mm Reach, 4kg Max Payload, 6 DOFs (SN4A-4/0.58)

A compact, lightweight SIASUN articulated arm built for handling, assembly and machine loading in cramped cells, from electronics production lines to the interior of machine tools. Internal wiring and a streamlined body keep it tidy in close quarters, while global error compensation keeps its motion precise.

In stock

BRAND:
SIASUN
PART #:
SN4A-4/0.58
ORIGIN:
China
AVAILABILITY:
FOR OPPORTUNITIES OVER 1 MILLION USD
SKU:
SIASUN-SN4A-4/0.58

SIASUN Industrial Robot Arm With 580mm Reach, 4kg Max Payload, 6 DOFs (SN4A-4/0.58)

Speed and precision usually pull against each other. Drive a robot arm harder and its path grows looser; slow it down for accuracy and the production line pays in throughput. The SIASUN Industrial Robot Arm with 580mm Reach, 4kg Max Payload, 6 DOFs (SN4A-4/0.58) is engineered to narrow that gap in the smallest of working spaces. A variable acceleration algorithm draws on the full mechanical performance of the arm, while high-precision global error compensation holds repeat positioning accuracy to ±0.02mm. The result is a compact, lightweight arm intended to work quickly where there is little margin for error, and even less room for the robot itself.

Robots Middle East supplies the SN4A-4/0.58 to manufacturers, system integrators and technical institutions across the Middle East. Our team prepares each quotation around the customer's application, arranges delivery to site and remains the point of contact for technical support once the arm is in service.

Background

SIASUN and its range of industrial arms

SIASUN builds a family of articulated industrial robots that extends from compact, light-payload models such as the SN4A-4/0.58 to heavy-duty arms for large workpieces. Within that family, the SN4A-4/0.58 sits at the compact end. It is the arm for cells in which the part is small, the fixture is close and the surrounding enclosure leaves little clearance. For a buyer, belonging to a broader range has practical value: a plant that standardises on one manufacturer can deploy small and large arms under a single supplier relationship, with consistent documentation and one route for service and spare parts.

The SN4A-4/0.58 is compact and lightweight in structure, and it is positioned for scenarios with demanding space requirements. Two examples stand out: factories producing 3C goods (computers, communications equipment and consumer electronics) and the interior of machine tools. Both are environments in which a larger robot would simply not fit, or would crowd out the equipment it is meant to serve.

Variable acceleration and global error compensation

Two technologies define how the arm behaves in operation. The first is a variable acceleration algorithm. Rather than applying one fixed acceleration profile to every movement, the controller varies acceleration so that the arm exploits its mechanical performance limits. This keeps operation stable and efficient and so maximises production efficiency, which is the figure that matters most when the same short movement is repeated many thousands of times a shift.

The second is high-precision global error compensation. Every articulated arm accumulates small geometric deviations across its joints and links; compensation corrects for them across the working envelope rather than at a single calibrated point. This correction brings repeat positioning accuracy to ±0.02mm. Together, the two features address the tension described above: one pushes the arm faster, the other keeps it where it should be.

Technical Specifications

SpecificationValue
ModelSN4A-4/0.58
Payload4kg
Reach580mm
Repeatability±0.02mm
Protection (wrist)IP67
CablingInternal wiring
ExteriorStreamlined design
ConstructionModular design for compact application integration
Motion controlVariable acceleration algorithm
Accuracy correctionHigh-precision global error compensation
Application areasHandling; assembly; loading and unloading

Specifications are as published by the manufacturer and are confirmed against the datasheet at quotation.

The manufacturer has not published the arm's weight, axis speeds, joint ranges, power supply, controller model, communication interfaces, operating temperature, approved mounting orientations, cycle time or the contents of the delivery; these are confirmed with Robots Middle East at quotation.

What makes the SN4A-4/0.58 suited to confined workspaces?

Fitting into a tight cell is not only a question of reach. An arm with external cable looms needs clearance for the cables as well as for its own links, and those cables can snag on fixtures, guards or the workpiece. The SN4A-4/0.58 routes its wiring internally and wraps it in a streamlined exterior, so the space it needs is defined by the arm itself rather than by what hangs from it. That makes its movements easier to plan in simulation and less likely to produce surprises on the shop floor.

The modular design works in the same direction. It allows easier and more compact application integration, which matters to the integrator who must fit the arm, its end effector and its peripherals into a cell whose dimensions are already fixed by the machine it serves. A reach of 580mm suits a station in which parts are presented close to the robot, and a payload of 4kg covers small components, light grippers and the tooling typical of electronics and small-part production.

Why does an IP67 wrist matter inside a machine tool?

The wrist is the part of the arm that travels closest to the process. Inside a machine tool it meets coolant spray, fine particles and wet workpieces; on an electronics line it may be exposed to cleaning agents. IP67 is the rating for protection against dust ingress and against temporary immersion in water, and the wrist of the SN4A-4/0.58 carries it. The rating applies to the wrist, so buyers planning to place the whole arm in a wet or dusty zone should discuss the protection of the remaining axes with Robots Middle East before committing to a cell layout.

Who is the SN4A-4/0.58 for?

The clearest fit is the electronics manufacturer. Production of 3C goods involves small, light parts, short movements and high volumes, and it is one of the two settings for which this arm is designed. Handling and assembly of such components play directly to the combination of compact build, variable acceleration and fine repeatability.

The second segment is the machine shop. Operators who want to automate the loading and unloading of CNC equipment often find that the only practical position for a robot is inside or immediately beside the machine. A compact arm with an IP67 wrist is designed for that position.

System integrators form a third group. For them, the modular design and internal wiring reduce the effort of fitting the arm into enclosures, test fixtures and bench-top cells. Technical colleges and research laboratories that need a compact industrial arm for training or development work may also find the SN4A-4/0.58 a sensible scale.

Not every task suits a light-payload arm. Where parts are heavier or stations are spread further apart, a larger model such as the SIASUN Industrial Robot Arm with 2010mm Reach, 12kg Max Payload, 6 DOFs (SR25A-12/2.01) may be the better starting point, and the full selection can be compared among our Industrial Robots and Robot Arms.

What is the SN4A-4/0.58 used for?

  1. Handling – moving small parts between trays, conveyors and fixtures with consistent positioning.
  2. Assembly – placing and joining small components where repeatability determines the quality of the fit.
  3. Loading and unloading – feeding blanks into machines and removing finished parts at the end of each cycle.
  4. Machine tool tending – working inside the machine envelope, with the IP67 wrist close to the process.
  5. Electronics production – serving 3C factory lines in which space is scarce and component weights are low.
  6. Compact cell integration – building bench-top or enclosed automation cells around a modular, internally wired arm.

Pricing and Availability

Robots Middle East supplies the SN4A-4/0.58 on quotation, so that the configuration, end-of-arm tooling and documentation reflect the application rather than a generic package. When you request a quotation, please describe the task, the parts to be handled and the cell in which the arm will operate; this allows our team to match the arm precisely to the work. Delivery, customs clearance and technical support are arranged together with the quotation. To begin, use the quotation request available on this page.

Frequently Asked Questions

What payload can the SN4A-4/0.58 carry?

The payload is 4kg. This allowance must cover the gripper or tool as well as the part being handled.

How precise is the arm?

Repeat positioning accuracy is ±0.02mm, achieved through high-precision global error compensation.

Can the arm work inside a machine tool?

Yes. The interior of machine tools is one of the settings the arm is designed for, and its wrist is rated IP67.

Is the whole arm rated IP67?

The IP67 rating applies to the wrist. Robots Middle East can advise on the protection of the other axes for your particular cell.

Is the arm easy to integrate into an existing cell?

The modular design enables easier and more compact application integration, and the internal wiring keeps cables clear of fixtures and guards.

How does the variable acceleration algorithm help production?

It varies acceleration to exploit the arm's mechanical performance limits, keeping operation stable and efficient and maximising production efficiency.

Where can I buy the SN4A-4/0.58 and what does it cost?

The SN4A-4/0.58 is supplied across the Middle East by Robots Middle East. Pricing depends on configuration and is provided in a formal quotation, which you can request on this page.

Summary

The SN4A-4/0.58 answers a familiar dilemma in small-part automation: how to move quickly without losing accuracy, in a space that barely admits a robot at all. Variable acceleration lets the arm use its full mechanical performance, global error compensation holds repeatability at ±0.02mm, and internal wiring, a streamlined exterior and a modular build keep it compact enough for electronics lines and the inside of machine tools. For handling, assembly and machine loading in confined cells, it is a focused tool rather than a general-purpose one. For buyers across the Middle East who want that tool specified, delivered and supported by Robots Middle East, this page is the starting point.

Specifications

General

BRAND SIASUN
PART # SN4A-4/0.58
ROBOT USE INDUSTRIAL

What's included

SIASUN Industrial Robot Arm (SN4A-4/0.58) SIASUN Industrial Robot Arm (SN4A-4/0.58)

Product Questions

No questions yet. Be the first to ask.

0/255

Write a Review
You're reviewing: SIASUN Industrial Robot Arm With 580mm Reach, 4kg Max Payload, 6 DOFs (SN4A-4/0.58)
loader
Loading...

You submitted your review for moderation.