Senad Belt Conveyor

The Senad Belt Conveyor opens up space between consecutive parcels so that dimensioning, weighing and scanning equipment can read each item on its own. Robots Middle East supplies it to parcel hubs and warehouses across the region that want cleaner measurement data and a steadier flow into their sorting lines.

In stock

BRAND:
SENAD
PART #:
Belt Conveyor
ORIGIN:
China
AVAILABILITY:
SUBJECT TO AVAILABILITY
SKU:
Senad-Belt-Conveyor

Senad Belt Conveyor

In a parcel hub, attention usually goes to the machines that measure: the dimensioning, weighing and scanning tunnel, and the sorter that acts on its data. Yet the accuracy of those machines is often decided earlier, on a modest stretch of belt whose only task is to change pace. The Senad Belt Conveyor is that stretch. With an 800mm belt width and a length of 1+1m, it uses a difference in speed to widen the gap between parcels, so that the DWS system downstream can read them one at a time rather than as a cluster. It is a short piece of equipment with a decisive say in the quality of everything that follows it.

Robots Middle East sells the Senad Belt Conveyor and supplies it to warehouses, logistics centres and parcel operators across the Middle East. Our team prepares the quotation, coordinates delivery to your site and remains your point of contact for support once the conveyor is part of your line, so that a single partner handles the commercial and practical side of the project from enquiry to operation.

Background

Senad and its warehouse automation range

Senad is the brand behind a family of warehouse automation equipment, and the Senad range available through Robots Middle East reflects that breadth: multi-port DWS units, 3D vision workstations for decoding, depalletising and non-contact capture, a bag palletising robot and automated guided vehicles. The belt conveyor belongs to the same family. It mainly works with dimensioning weighing scanning machines, telescopic belt conveyors, parcel singulation and parcel sorting machines, and that pairing tells the buyer how it is meant to be used: as a link in an automated line rather than as a stand-alone machine. Seen in that light, the conveyor is less a general transport belt than a preparation step, conditioning the parcel stream before it reaches the equipment that records data about each item.

Speed difference as a gapping method

The Senad Belt Conveyor is featured as a speed-difference conveyor, designed to enlarge the gap between parcels. The principle is widely used in parcel handling: when an item passes from a slower section of conveying onto a faster one, it accelerates away from the item behind it, and the space between the two grows. No sensors have to hold parcels back and no operator has to space them by hand; the separation emerges from the change in pace itself. The purpose is clear: before parcels are scanned and weighed, they have to be separated from the parcels in front of and behind them by a certain distance, so that the DWS system can read them one by one. A measuring station that sees two touching parcels may treat them as a single object, and the resulting record is of little use to the sorter that depends on it.

Technical Specifications

SpecificationValue
Belt width800mm
Length1+1m
Operating principleSpeed difference, to enlarge the gap of parcels
PurposeSeparates each parcel from the parcels in front and behind by a certain distance, so the DWS system can read parcels one by one
Works withDimensioning weighing scanning machines, telescopic belt conveyors, parcel singulation and parcel sorting machines

Specifications are as published by the manufacturer and are confirmed against the datasheet at quotation.

The manufacturer has not published the belt speed, belt material, motor power, load capacity, weight, overall dimensions, power supply, package contents or control interface; Robots Middle East confirms each of these with you at quotation.

Why does a DWS system need a gapping conveyor in front of it?

A dimensioning, weighing and scanning station works on the assumption that it is looking at one parcel at a time. Its dimensioning sensors measure the outline of what passes through, its scale records the weight on the platform, and its readers capture the label. When parcels arrive close together, those assumptions break down: outlines merge, weights combine and labels may be associated with the wrong item. The data then travels downstream, and a sorter acting on a flawed record sends parcels to the wrong destination or rejects them for manual handling.

The Senad Belt Conveyor addresses the problem at its origin. By enlarging the gap through a speed difference, it presents the DWS system with parcels that are already separated from their neighbours, which is precisely the condition needed for reading them one by one. For an operator, the practical effect is that the measuring equipment can do the job it was selected for, rather than being undermined by the way parcels reach it. Adding a dedicated gapping step is usually a more straightforward correction than reworking the measuring station itself.

How does the Senad Belt Conveyor fit into a wider automation line?

The machines this conveyor mainly works with, taken together, describe a typical parcel flow. Telescopic belt conveyors extend into vehicles to unload or load parcels at the dock. Parcel singulation equipment turns a bulk flow into a single file. The gapping conveyor then opens up space within that file, the DWS station measures and identifies each parcel, and the sorting machine routes it to its destination. In this chain, the Senad Belt Conveyor occupies the position immediately before measurement, where spacing matters most.

With an 800mm belt width, planners can check the conveyor early against the widths of the singulation and DWS equipment on either side. The electrical and control connections are the points an integrator will want settled before installation, and Robots Middle East works through them with you during the project so that the conveyor connects cleanly to the rest of the line.

Who is the Senad Belt Conveyor for?

The conveyor is aimed at operations that measure and sort parcels at volume. Courier and express networks running hubs with DWS stations are the clearest fit, since their sortation depends on accurate dimensional and weight data for every item. E-commerce fulfilment centres that ship a wide mix of parcel sizes benefit in the same way, as do third-party logistics providers who must report reliable measurements to their clients. Postal operators modernising their sorting centres form another natural group.

System integrators and engineering consultants are equally relevant buyers. When they design a line around a measuring station such as the Senad 4-Ports DWS, a gapping conveyor from the same brand is a logical component to specify ahead of it. Projects that also involve vision-based capture, for example the Senad 3D Vision Non-Contact Capture Stations, share the same need for parcels that arrive separated, and Robots Middle East can advise on how the pieces combine within your layout.

What is the Senad Belt Conveyor used for?

  1. Gapping before DWS: opening space between parcels so dimensioning, weighing and scanning equipment reads them one by one.
  2. Protecting sortation accuracy: supplying the sorter with records that relate to single parcels rather than merged clusters.
  3. Following singulation: widening the spacing of a single-file stream after parcel singulation equipment has done its work.
  4. Dock-to-sorter lines: forming part of a flow that begins with telescopic belt conveyors at the loading dock.
  5. Retrofitting existing hubs: adding a dedicated gapping step in front of a DWS station that receives parcels too close together.
  6. New warehouse automation projects: serving as the preparation stage in a line designed around Senad measuring and sorting equipment.

Pricing and Availability

Robots Middle East supplies the Senad Belt Conveyor on a quotation basis, as the right configuration depends on how it connects to the equipment around it. When you request a quotation, our team discusses your layout, the neighbouring machines and your throughput goals, so that the proposal reflects the line you actually run. Delivery, customs and support are arranged with the quotation, so you receive one clear proposal for the whole engagement. To start the process, use the quotation request available on this page.

Frequently Asked Questions

What does the Senad Belt Conveyor do?

It uses a speed difference to enlarge the gap between parcels. This separates each parcel from those in front and behind, so the DWS system can read them one by one.

What is the belt width of the Senad Belt Conveyor?

The belt width is 800mm. Its length is 1+1m.

Which equipment does it work with?

It mainly works with dimensioning weighing scanning machines, telescopic belt conveyors, parcel singulation and parcel sorting machines.

How does a speed difference create a gap between parcels?

When a parcel moves from slower conveying onto a faster section, it pulls away from the parcel behind it. The space between them grows without any manual spacing.

Why must parcels be separated before scanning and weighing?

A DWS station needs to see one parcel at a time to measure, weigh and identify it correctly. Touching parcels can be recorded as a single item, which leads to errors at the sorter.

Can it be added to an existing parcel line?

It is designed to work alongside DWS, singulation and sorting equipment, which makes it relevant to existing lines as well as new ones. Robots Middle East can advise on how it fits your layout and control system.

Where can I buy the Senad Belt Conveyor and what does it cost?

You can buy the Senad Belt Conveyor from Robots Middle East, which supplies it across the Middle East. The cost depends on your configuration and is set out in a quotation that you can request from this page.

Summary

The Senad Belt Conveyor is a reminder that the quality of parcel data is shaped before any measurement takes place. With an 800mm belt width, a length of 1+1m and a speed-difference design that enlarges the gap between parcels, it prepares the stream so that dimensioning, weighing and scanning equipment can treat every item on its own, and so that the sorter downstream acts on records it can trust. It works alongside telescopic belt conveyors, singulation and sorting machines, taking its place as the step that makes the expensive measuring equipment worth its investment. Robots Middle East quotes, delivers and supports it across the region as part of a single proposal. If you are planning or improving a line that depends on accurate parcel measurement, this page is the starting point.

Specifications

General

BRAND SENAD
PART # Belt Conveyor

What's included

Senad Belt Conveyor (Belt Conveyor)

Product Questions

No questions yet. Be the first to ask.

0/255

Write a Review
You're reviewing: Senad Belt Conveyor
loader
Loading...

You submitted your review for moderation.