Senad Telescopic Belt Conveyor

A belt conveyor that lengthens and shortens to suit the dock and the vehicle in front of it, built for loading, unloading and material transfer wherever the required reach keeps changing. Supplied across the Middle East by Robots Middle East, configured to each site.

In stock

BRAND:
SENAD
PART #:
Telescopic Belt Conveyor
ORIGIN:
China
AVAILABILITY:
SUBJECT TO AVAILABILITY
SKU:
Senad-Telescopic-Belt-Conveyor

Senad Telescopic Belt Conveyor

A loading dock is fixed, but almost nothing that backs up to it is. One morning brings a short delivery van, the afternoon a deep container, and the following day a lorry parked at an awkward angle because the yard was full. A conveyor of fixed length is, in effect, a guess about which of those vehicles will arrive. The Senad Telescopic Belt Conveyor removes the guess: it is a belt conveyor fitted with a telescopic mechanism, so its length can be set freely to the size of the site and the job in hand, extending towards the goods and retracting when the work is done.

Robots Middle East supplies the Senad Telescopic Belt Conveyor to distribution centres, warehouses, manufacturers and logistics operators across the Middle East. Robots Middle East prepares each quotation against the customer's site and requirements, arranges delivery to the project location, and provides support once the conveyor is in service.

Background

Senad: a Shanghai manufacturer with its own software team

Senad describes itself as a national high-tech enterprise, and both its company offices and its factory are located in Shanghai. The company maintains its own software development team with complete research and development capabilities, which matters for a manufacturer whose wider range, shown in the Senad category, spans logistics automation from vision-based workstations to palletising and guided vehicles. The telescopic belt conveyor sits within that range as one of the mechanical building blocks of a loading and material handling operation.

The telescopic principle

The idea behind the machine is straightforward. Senad starts from an ordinary belt conveyor and adds a telescopic mechanism to it, so that the conveying length is no longer a fixed property of the frame but an adjustable one. The result can be shortened to fit a compact bay or lengthened to reach deeper into a vehicle or across a transfer point. Senad positions the conveyor mainly for vehicle loading and unloading, and for material transfer systems where a telescopic reach is required. The manufacturer also states that, while meeting ergonomic requirements, the design can reduce damage to goods and the physical workload on staff, and improve the efficiency of loading and unloading vehicles.

Technical Specifications

SpecificationValue
Belt width600mm or 800mm
Belt directionReversible
Belt speed0~36M/minute (adjustable)
Capacity60kg/meter
Tilting0~+5°, adjustable by hydraulic
Structure materialStainless Steel
Belt materialPVC PU Rubber Steel Rubber
CustomisationOEM and ODM services; device colour customisable
PackingWooden Case

Specifications are as published by the manufacturer and are confirmed against the datasheet at quotation.

The manufacturer has not published the supply voltage, IP rating, noise level, maximum load per belt section, control system, operating temperature range, certifications or the wheel and mobility arrangement; Robots Middle East confirms each of these at quotation.

What makes a telescopic belt conveyor different from a fixed belt conveyor?

A fixed belt conveyor is designed around one distance. That works well on a production line where the start and end points never move, but a loading bay is a different environment: the point where goods must be picked up or set down moves deeper into the vehicle as it is unloaded, and closer to the door as it is filled. With a fixed conveyor, the gap between the end of the belt and the goods is bridged by people walking and carrying.

The Senad Telescopic Belt Conveyor changes that relationship. Because its length can be adjusted freely, the end of the belt can follow the work rather than staying at the dock edge. This is the basis for the manufacturer's statement that the machine reduces the labour intensity of personnel and improves loading and unloading efficiency: fewer steps per carton, and less handling of each item.

Two further characteristics extend the flexibility. The belt is reversible, so the same machine can carry goods into a vehicle during loading and out of it during unloading, without a second conveyor. The tilt of 0~+5°, adjusted hydraulically, allows the belt to be inclined slightly to suit the height relationship between dock and vehicle floor. Add a belt speed that is adjustable across 0~36M/minute, and the conveyor can be matched to the pace of the team working at its end rather than forcing the team to keep up with it.

Can the Senad Telescopic Belt Conveyor be adapted to my site?

Adaptation is built into how Senad offers the product. The belt is available in widths of 600mm or 800mm, which allows a choice between a narrower conveyor for compact parcels and a wider one for larger cartons. Senad lists belt materials including PVC, PU and rubber, giving room to match the belt surface to the goods being handled. The structure is made of stainless steel.

Beyond those options, Senad supports OEM and ODM services, and the device colour can be customised, for instance to align with a site's safety colour scheme or corporate identity. Four model designations are named, TBC2S-6/4, TBC3S-6/8, TBC4S-6/12 and TBC5S-6/14; for the TBC2S-6/4, Senad gives a retracted length (A) of 6,000mm. The specific configuration for a given dock is selected during the quotation process, where Robots Middle East confirms the figures that apply to the chosen model.

Who is the Senad Telescopic Belt Conveyor for?

The clearest fit is any operation that loads or unloads vehicles at volume and currently relies on staff carrying goods between the dock and the vehicle interior. Parcel and courier hubs, e-commerce fulfilment centres and third-party logistics warehouses fall squarely into this group, as do retail distribution centres receiving mixed deliveries throughout the day.

Manufacturers with an outbound dispatch area are a second segment. Where finished goods leave in cartons or sacks, a reversible, adjustable-length conveyor can serve both incoming raw materials and outgoing products at the same door.

A third group consists of facilities with irregular layouts, where space at the dock is restricted or the transfer distance between two processes varies. Because the length adjusts to the site size and actual demand, the conveyor can be fitted into spaces where a fixed conveyor of a single length would be either too long or too short.

Finally, project integrators building a wider material flow system may use the conveyor as the vehicle-facing element of a larger line. Robots Middle East can quote it together with other equipment from the Senad range where a project calls for it.

What is the Senad Telescopic Belt Conveyor used for?

  1. Vehicle unloading: extending into a lorry or van so goods travel out on the belt rather than being carried to the dock.
  2. Vehicle loading: reversing the belt to feed cartons into the vehicle as it fills from the far end towards the door.
  3. Container handling: reaching into deep shipping containers where the walking distance by hand would be greatest.
  4. Material transfer between processes: bridging a variable gap between two points in a production or warehouse flow.
  5. Dispatch areas in manufacturing: moving packed finished goods from the end of a line to the waiting vehicle.
  6. Reducing handling damage: limiting the number of times each item is lifted, carried and set down between dock and vehicle.

Pricing and Availability

The Senad Telescopic Belt Conveyor is supplied on quotation, because the right configuration depends on the model, belt width, belt material, colour and the conditions at the customer's dock. Robots Middle East reviews the site requirements, confirms the specifications against the manufacturer's datasheet, and prepares an offer for the configuration that suits the application. Delivery, customs clearance and after-sales support are arranged together with the quotation. To begin, send your dock dimensions, the types of goods you handle and the vehicles you load, using the quotation request available on this page.

Frequently Asked Questions

What is the Senad Telescopic Belt Conveyor designed to do?

It is a belt conveyor with an added telescopic mechanism, so its length can be adjusted to the site and the task. Senad positions it mainly for vehicle loading and unloading and for material transfer systems that need a telescopic reach.

Can the belt run in both directions?

Yes. The belt direction is reversible, so the same conveyor can be used for both loading and unloading.

How fast does the belt move?

The belt speed is adjustable across 0~36M/minute, which allows it to be matched to the pace of the operators working at the end of the conveyor.

Which belt widths are available?

Senad offers the conveyor with a belt width of 600mm or 800mm. The appropriate width is selected according to the goods being handled.

Can the conveyor be inclined?

Yes. The tilt is adjustable from 0~+5° by hydraulic means, which helps to match the height difference between dock and vehicle.

Can the conveyor be customised?

Senad supports OEM and ODM services, and the device colour can be customised. Belt material options are also listed, and Robots Middle East confirms the chosen configuration at quotation.

Where can I buy the Senad Telescopic Belt Conveyor and what does it cost?

You can buy it from Robots Middle East, which supplies it across the Middle East. The cost depends on the model and configuration, so a quotation is prepared for each project after the site requirements have been reviewed.

Summary

Docks stay where they are built, while the vehicles, containers and orders that arrive at them keep changing. The Senad Telescopic Belt Conveyor answers that mismatch with a conveyor whose length follows the work: a stainless steel structure, a reversible belt in 600mm or 800mm widths, adjustable speed and a hydraulically adjustable tilt, built by a Shanghai manufacturer that offers OEM and ODM customisation. For operators who want fewer steps per carton, less handling damage and a loading bay that adapts to whatever pulls up to it, this page is the starting point.

Specifications

General

BRAND SENAD
PART # Telescopic Belt Conveyor

What's included

Senad Telescopic Belt Conveyor (Telescopic Belt Conveyor)

Product Questions

No questions yet. Be the first to ask.

0/255

Write a Review
You're reviewing: Senad Telescopic Belt Conveyor
loader
Loading...

You submitted your review for moderation.