Senad Telescopic Conveyor

A belt conveyor that lengthens and shortens to suit the dock, the vehicle and the task in hand, built by SENAD for loading, unloading and material transfer where a fixed length will not serve. It brings the end of the belt to the goods, rather than asking your team to carry the goods to the belt.

In stock

BRAND:
SENAD
PART #:
Telescopic Conveyor
ORIGIN:
China
AVAILABILITY:
SUBJECT TO AVAILABILITY
SKU:
Senad-Telescopic-Conveyor

Senad Telescopic Conveyor

At a dock door, floor space and reach pull in opposite directions. While no vehicle is parked, every metre of conveyor standing in front of the door is an obstacle to forklifts, pallets and people; once a truck backs up, every metre the conveyor falls short of the load is a metre that someone must walk with a carton in their arms. The Senad Telescopic Conveyor resolves that conflict by fitting a telescopic mechanism to an ordinary belt conveyor, so that its length can be adjusted freely to the size of the site and to the actual demand of the job. It is built in four models, from the TBC2S-6/4 to the TBC5S-6/14, which share the same retracted length and differ in how far they reach once extended.

Robots Middle East sells the Senad Telescopic Conveyor and supplies it to warehouses, distribution centres, manufacturers and logistics operators across the Middle East. Our team prepares the quotation for the model and belt configuration that suits your dock, arranges delivery to your site and remains your point of contact for support once the conveyor is in service, so that you deal with a single supplier from the first enquiry through to daily operation.

Background

SENAD and its logistics equipment range

SENAD manufactures equipment for moving, identifying and handling goods in logistics and production settings. Alongside the telescopic conveyor, the SENAD range offered by Robots Middle East includes dimensioning, weighing and scanning stations, 3D vision workstations, automated guided vehicles and palletising robots; the complete selection is gathered in the Senad category. Within that range, the telescopic conveyor occupies a particular position: it is the equipment that stands at the threshold between the building and the vehicle, carrying goods across the gap that fixed installations cannot bridge.

A telescopic mechanism on a conventional belt conveyor

The design starts from something familiar. Rather than introducing an unfamiliar handling principle, SENAD takes an ordinary belt conveyor and adds a telescopic mechanism to it, allowing the working length to be set according to the site and the task. The belt is reversible, so the same unit can feed goods into a vehicle for loading or bring them out for unloading. Belt speed is adjustable across 0~36M/minute, and the conveyor can be tilted between 0~+5°, adjusted by hydraulic means, to suit the height relationship between dock and vehicle floor. The frame is made of stainless steel, and the belt materials are listed as PVC, PU, rubber and steel rubber, with a belt width of 600mm or 800mm on every model.

Technical Specifications

SpecificationTBC2S-6/4TBC3S-6/8TBC4S-6/12TBC5S-6/14
Retracted length (A)6,000mm6,000mm6,000mm6,000mm
Extended length (B)4,000mm8,000mm12,000mm14,000mm
Total length (C)10,000mm14,000mm18,000mm20,000mm
Height750mm800mm1,000mm1,200mm
Conveyor width1,380mm1,400mm1,470mm1,530mm
Belt width600mm or 800mm600mm or 800mm600mm or 800mm600mm or 800mm
Belt directionReversibleReversibleReversibleReversible
Belt speed0~36M/minute (adjustable)0~36M/minute (adjustable)0~36M/minute (adjustable)0~36M/minute (adjustable)
Capacity60kg/meter60kg/meter60kg/meter60kg/meter
Tilting0~+5°, adjustable by hydraulic0~+5°, adjustable by hydraulic0~+5°, adjustable by hydraulic0~+5°, adjustable by hydraulic
Driven motor1.5KW2.2KW3.0KW4.0KW
Weight2T3T4T5T
Frame materialStainless SteelStainless SteelStainless SteelStainless Steel
Belt materialPVC, PU, Rubber, Steel RubberPVC, PU, Rubber, Steel RubberPVC, PU, Rubber, Steel RubberPVC, PU, Rubber, Steel Rubber

Specifications are as published by the manufacturer and are confirmed against the datasheet at quotation.

The manufacturer has not published the power supply voltage, the telescoping speed, the noise level, any certifications, the package contents or the dimensions of the exact configuration supplied; these are confirmed with your quotation.

How do the four TBC models differ?

All four models retract to the same 6,000mm, which means that the space they occupy at the dock when idle is identical in length, whichever model is chosen. The difference lies in the reach beyond that point. The TBC2S-6/4 extends by 4,000mm to a total length of 10,000mm; the TBC3S-6/8 extends by 8,000mm to 14,000mm; the TBC4S-6/12 extends by 12,000mm to 18,000mm; and the TBC5S-6/14 extends by 14,000mm to 20,000mm. The figures in each model code correspond to these retracted and extended lengths, which makes the range easy to read at a glance.

Greater reach brings a larger machine in the other dimensions. Height rises from 750mm on the TBC2S-6/4 to 800mm, 1,000mm and 1,200mm on the larger models, and conveyor width grows from 1,380mm to 1,400mm, 1,470mm and 1,530mm respectively. The driven motor steps up from 1.5KW through 2.2KW and 3.0KW to 4.0KW, and the weight increases from 2T to 3T, 4T and 5T. These points matter when planning: the height affects how the conveyor meets the vehicle floor and the operator, the width affects how it sits within the dock opening, and the weight bears on the floor beneath it. The belt width choice of 600mm or 800mm and the reversible belt are common to every model.

What does a telescopic conveyor change compared with a fixed belt conveyor?

A fixed belt conveyor is designed around a single, predetermined distance. At a loading dock, that distance is rarely constant: vehicles differ in body length, a load is packed from the front of the vehicle towards the doors or emptied in the opposite direction, and the point at which goods must be placed or picked moves continually during the job. A conveyor that can be extended into the vehicle and drawn back as the work progresses keeps the end of the belt close to the operator throughout, rather than only at the start or the finish.

The Senad design adds two further adjustments to this basic advantage. Because the belt is reversible, a single dock position can serve both inbound receipt and outbound dispatch without a second machine. Because the tilt can be adjusted hydraulically within 0~+5°, the belt can be angled to suit the dock and vehicle rather than requiring the site to be built around the conveyor. Combined with an adjustable belt speed, these features allow the conveyor to be adapted to the pace of the team and the type of goods, which is the principal reason telescopic conveyors are chosen over fixed sections at busy docks.

Who is the Senad Telescopic Conveyor for?

The conveyor is intended for operations that load and unload vehicles or transfer material where the required length changes. Parcel and e-commerce hubs, where loose cartons are handled in large quantities at dock doors, form a natural audience, as do third-party logistics providers whose docks receive a varied mix of vehicles from different customers. Manufacturers dispatching boxed or bagged products, and retail distribution centres replenishing stores, also benefit wherever goods are moved piece by piece rather than on pallets.

Choosing the model is largely a question of reach. Where the vehicles served are shorter, or where a compact, lighter unit with a lower working height is preferred, the TBC2S-6/4 is the sensible starting point. Sites handling longer vehicle bodies are better served by the TBC4S-6/12 or, where the greatest reach in the range is needed, the TBC5S-6/14, accepting its greater height, width and weight. The TBC3S-6/8 sits between these, offering double the extension of the smallest model without the full size of the largest. Robots Middle East can advise on the appropriate model once the vehicle types and dock layout are known.

What is the Senad Telescopic Conveyor used for?

  1. Truck loading: extending into the vehicle body so that cartons arrive at the point where they are being stacked.
  2. Container and trailer unloading: running the reversible belt outwards to bring goods from the vehicle into the building.
  3. Mixed inbound and outbound docks: serving receipt and dispatch at the same door by changing the belt direction.
  4. Material transfer with changing distances: bridging between work areas where the required length varies over the day.
  5. Docks with limited floor space: retracting when not in use to keep the area in front of the door clear.
  6. Linking the dock to internal handling: carrying goods between the vehicle and the conveyors or workstations inside the facility.

Pricing and Availability

Robots Middle East provides the Senad Telescopic Conveyor on a quotation basis, as the right configuration depends on the model, the belt width and belt material, and the conditions at your dock. To prepare an accurate proposal, it helps us to know the types of vehicle you serve, the goods you handle, the layout of the dock and whether the conveyor will be used for loading, unloading or both. Delivery, customs and support are arranged with the quotation. To begin, please submit your requirements through the quotation request available on this page.

Frequently Asked Questions

What is the difference between retracted, extended and total length?

The retracted length is the length of the conveyor when fully drawn in, which is 6,000mm on every model. The extended length is the additional reach the telescopic mechanism provides, and the total length is the sum of the two, ranging from 10,000mm on the TBC2S-6/4 to 20,000mm on the TBC5S-6/14.

Can the belt run in both directions?

Yes. The belt is reversible on all four models, so the conveyor can be used for loading goods into a vehicle and for unloading them.

How much load can the conveyor carry?

The capacity is 60kg/meter. This figure is published for the range as a whole.

Can the conveyor be inclined?

Yes. Tilting is adjustable between 0~+5°, adjusted by hydraulic means, so the belt can be set to suit the relationship between dock and vehicle floor.

Which belt widths and materials are available?

Every model is offered with a belt width of 600mm or 800mm. The belt materials are listed as PVC, PU, rubber and steel rubber, and the frame is made of stainless steel.

Which model has the most powerful drive?

The TBC5S-6/14 carries the largest driven motor in the range at 4.0KW. The TBC2S-6/4, TBC3S-6/8 and TBC4S-6/12 use 1.5KW, 2.2KW and 3.0KW motors respectively.

Where can I buy the Senad Telescopic Conveyor and what does it cost?

You can buy it from Robots Middle East, which supplies the conveyor across the Middle East. The cost depends on the model and configuration chosen, so please request a quotation and our team will prepare a proposal for your site.

Summary

The tension at a dock door is between space and reach: a conveyor must be short enough to stay out of the way and long enough to meet the load. The Senad Telescopic Conveyor addresses both by adding a telescopic mechanism to a conventional belt conveyor, with four models that share a 6,000mm retracted length and extend by 4,000mm to 14,000mm. A reversible belt, adjustable speed, hydraulic tilt and a stainless steel frame allow it to serve loading, unloading and material transfer at the same door. Robots Middle East quotes, delivers and supports the conveyor throughout the region, and for any operation weighing which model suits its vehicles and its dock, this page is the starting point.

Specifications

General

BRAND SENAD
PART # Telescopic Conveyor

What's included

Senad Telescopic Conveyor (Telescopic Conveyor)

Product Questions

No questions yet. Be the first to ask.

0/255

Write a Review
You're reviewing: Senad Telescopic Conveyor
loader
Loading...

You submitted your review for moderation.