Topsky Tianlong Tantu 120-Y
In stock
- BRAND:
- TOPSKY
- PART #:
- Tianlong Tantu 120-Y
- ORIGIN:
- China
- AVAILABILITY:
- SUBJECT TO AVAILABILITY
- SKU:
- Topsky-Tianlong-Tantu-120-Y
Topsky Tianlong Tantu 120-Y
Firefighting robots are usually judged by how far they throw water. The more demanding question at a large industrial fire is how long the machine can keep throwing it. Many incidents are not won in the first ten minutes. They are contained over hours, while tanks are cooled, exposures are protected and the atmosphere is checked again and again. The Topsky Tianlong Tantu 120-Y is designed for that slower kind of fight. It is a diesel-powered crawler that carries a large-flow water and foam cannon, a gas detection suite and a hydraulic power outlet into the hazard area. On a full tank it runs for hours, and its operator controls it from a safe distance.
Robots Middle East supplies the Topsky Tianlong Tantu 120-Y to fire services, industrial operators and emergency response organisations across the Middle East. Robots Middle East prepares each quotation and arranges delivery to the site. It also supports the robot after handover, so that the technical questions and the commissioning are handled by the same team.
Background
TOPSKY and the Tianlong line
The Tantu 120-Y is marketed under the TOPSKY brand as part of the Tianlong family of unmanned ground vehicles. The sources identify this robot by the model designation RXR-M120D. They describe it as a crawler-type, medium-sized, oil-powered fire extinguishing robot. The word "medium-sized" matters to buyers. The Tantu 120-Y is large enough to carry a high-capacity monitor and to drag a charged hose line. It is still compact enough to be transported to an incident and manoeuvred through industrial plant, yards and access roads. Buyers comparing it with other platforms in the same family can browse the wider range of UGVs.
Diesel engine and closed hydraulics
The robot's central design choice is how it is powered. A diesel engine drives a closed hydraulic system, which in turn drives the ASV rubber tracks. The same hydraulic circuit also feeds a reserved output interface for external tools. Rubber tracks spread the robot's weight and grip on broken ground. The closed hydraulic system transfers engine power smoothly to the tracks, which allows stepless speed control from the remote. Because the energy is stored as fuel rather than in a battery pack, the operating time depends on the tank and not on a charging cycle. That endurance is the foundation of the robot's role on long-duration incidents.
Technical Specifications
| Specification | Value |
|---|---|
| Model designation | RXR-M120D |
| Product type | Crawler-type medium-sized oil-powered fire extinguishing robot |
| Power and drive | Diesel engine; closed hydraulic system driving ASV rubber tracks |
| Engine rated power (kW/rpm) | ≥30.1/2400 |
| Weight | ≥1350kg |
| Size | ≤ Length 2090mm× width 1550mm× height 1530mm |
| Water flow | 121.7L/s |
| Water/foam range | ≥96.5m water, ≥92.3m foam |
| Hose towing | DN80 or DN65 fire hose, 120 m |
| Traction | ≥8.07KN |
| Ground clearance | ≥270mm |
| Maximum linear speed | ≥3.61m/s, remote control stepless speed change |
| Climbing ability | ≥25° |
| Obstacle height | ≥300mm |
| Wading depth | ≥300mm |
| Fuel tank capacity | 50L |
| Continuous operation time (full tank) | 6.5h |
| Remote control distance | ≥1000m |
| Control terminal | Handheld digital integrated wireless remote control and wired remote control |
| Gas and environment detection | 14 kinds of gases, temperature, humidity: CO2, CH4, CO, H2S, O2, H2, NH3, Cl2, SO2, NO2, C3H8 (propane), C2H4O (acetaldehyde), C2H2 (acetylene); VOC optional |
| Hydraulic output interface | Pressure 16MPa, flow up to 25L/min |
Specifications are as published by the manufacturer and are confirmed against the datasheet at quotation.
The manufacturer has not published the battery or starting system, the IP rating, the included accessories or the software version; Robots Middle East confirms these at quotation.
Why choose a diesel-powered firefighting robot for long incidents?
Endurance is the clearest argument. A 50L fuel tank gives 6.5h of continuous operation. One deployment can therefore cover a large part of an operational period without the robot being withdrawn to recharge. Refuelling a diesel machine is also a familiar task for fire and industrial crews, and it does not depend on charging infrastructure being available near the incident.
The engine also supplies the power behind the robot's working figures. Rated at ≥30.1/2400 (kW/rpm), it drives the closed hydraulics that give ≥8.07KN of traction. That pulling force is what allows the robot to tow up to 120 m of DN80 or DN65 fire hose. The hose is the robot's supply line. A monitor rated at 121.7L/s is only useful if the robot can bring a charged line forward, and the tracked chassis and hydraulic drive are sized for that job.
Reach complements endurance. The rated throw of ≥96.5m with water and ≥92.3m with foam lets the robot attack from a distance as well as at close quarters. The operator in turn can work up to ≥1000m away by wireless remote. A wired remote control is also available as an alternative where a cable link suits the situation better.
What does the hydraulic output interface add?
Most fire robots do one job, which is to deliver water or foam. The Tantu 120-Y also has a reserved hydraulic output interface rated at 16MPa and up to 25L/min. The manufacturer names hydraulic breaking tools, hydraulic generators, hydraulic high-pressure water pumps and hydraulic welding machines as examples of equipment that this outlet can serve. At a protracted incident, the robot can therefore act as a mobile power source as well as a nozzle carrier. This is useful during forcible entry, during recovery work after the fire is knocked down, or where a separate power pack would otherwise have to be brought forward.
The detection suite adds information to that utility. The robot measures 14 kinds of gases together with temperature and humidity, and VOC sensing is available as an option. The gases include flammable species such as CH4, H2 and C3H8, toxic species such as CO, H2S, Cl2 and NH3, and O2. Readings from inside the hazard zone help commanders decide where crews may safely go, and when.
Who is the Topsky Tianlong Tantu 120-Y for?
The robot suits organisations that face large, long-burning fires in places where people should not stand close. Industrial and municipal fire brigades are the primary buyers. These include petrochemical operators with in-house fire teams, refineries, tank farms, chemical parks and gas processing sites, where cooling and foam application may continue for hours. Ports, logistics hubs and large warehouse operators are a second group, because their fires involve wide areas and heavy fire loads. Tunnel and transport infrastructure operators may value the combination of remote stand-off, gas monitoring and hose towing. Civil defence and emergency management agencies can use the robot as a regional asset that is deployed where a fixed installation cannot reach.
The Tantu 120-Y is less suited to buyers who need a very small machine for building interiors and narrow corridors. At ≥1350kg and up to 1550mm wide, it is a medium-sized crawler intended for open plant, yards and large structures. Robots Middle East can advise on other platforms in the UGVs range where the operating environment calls for a different size class.
What is the Topsky Tianlong Tantu 120-Y used for?
- Tank and process unit cooling: sustained water delivery to protect exposed tanks and equipment while crews stay back.
- Foam attack on liquid fuel fires: long-range foam application on hydrocarbon fires at refineries and storage sites.
- Hazardous atmosphere reconnaissance: gas, temperature and humidity readings taken from inside the danger zone.
- Hose line advancement: towing charged DN80 or DN65 hose forward over rough or wet ground.
- Hydraulic tool support: powering breaking tools, pumps, generators or welding equipment from the reserved outlet.
- Large-area and warehouse fires: long-duration monitor operation on wide fire fronts with heavy fire loads.
Pricing and Availability
Robots Middle East supplies the Topsky Tianlong Tantu 120-Y on a quotation basis. Each quotation reflects the configuration, any optional sensors such as VOC detection, and the requirements of the project. Delivery, customs clearance and after-sales support are arranged together with the quotation. To begin, please send your requirements and operating environment using the quotation request available on this page.
Frequently Asked Questions
What powers the Topsky Tianlong Tantu 120-Y?
A diesel engine with a rated power of ≥30.1/2400 (kW/rpm) drives a closed hydraulic system, which moves the ASV rubber tracks.
How long can it operate on one tank of fuel?
The 50L fuel tank gives 6.5h of continuous operation when full.
Can it spray foam as well as water?
Yes. The cannon delivers water with a range of ≥96.5m and foam with a range of ≥92.3m, at a water flow of 121.7L/s.
How far away can the operator stand?
The wireless remote control reaches ≥1000m. A wired remote control is also available as an alternative.
Which gases does the robot detect?
It measures 14 kinds of gases, including CO, H2S, CH4, H2, NH3, Cl2, SO2, NO2 and O2, together with temperature and humidity. VOC detection is optional.
How does it cope with rough ground and water?
The tracked chassis climbs slopes of ≥25°, crosses obstacles of ≥300mm and wades through water ≥300mm deep, with a ground clearance of ≥270mm.
Where can I buy the Topsky Tianlong Tantu 120-Y and what does it cost?
Robots Middle East supplies it throughout the Middle East, and the cost is set out in a quotation prepared for your configuration. Please request one through this page.
Summary
The Topsky Tianlong Tantu 120-Y is built for fires that are measured in hours rather than minutes. Its diesel engine and closed hydraulics provide 6.5h of continuous work from a 50L tank and enough traction to haul 120 m of hose. They also power a reserved outlet for hydraulic tools. Its cannon delivers 121.7L/s, and its gas sensors report conditions from a zone that crews should not enter. Together these features make it a robot for staying in the fight as well as reaching it. For fire services and industrial operators in the Middle East evaluating a long-endurance firefighting robot with Robots Middle East, this page is the starting point.