Unitree H2-A Standard A Humanoid Robot

Most machines are finished on the day they leave the factory; a humanoid robot rarely is. Its frame, motors and bearings are settled, yet the way it balances, reaches and responds can keep changing long after delivery. The Unitree H2-A Standard A Humanoid Robot is built on that premise. It pairs a 180 cm humanoid body from the H2 series, with 31 degrees of freedom and 360N·m of joint torque, with algorithms that evolve continuously through OTA updates. For a buyer, the question therefore shifts from what the robot can do on arrival to what the platform can grow into, and which parts of it are fixed in hardware from the outset.

Robots Middle East supplies the Unitree H2-A Standard A Humanoid Robot to universities, research laboratories, system integrators and corporate innovation teams across the Middle East. Robots Middle East prepares each quotation against the exact configuration requested, coordinates delivery to the customer's site and remains the point of contact for support once the robot is in use.

Background

Unitree Robotics and the step to full-size humanoids

Unitree Robotics built its reputation on legged robots, first with quadrupeds used in research, inspection and education, and later with humanoid platforms that brought the same engineering approach to two-legged machines. The H2 series sits at the full-size end of that range, with a 180 cm design that the manufacturer presents as redefining industrial aesthetics. A robot of human proportions can share corridors, workstations and demonstration spaces designed for people, which is a large part of why research groups and integrators look at this class of machine rather than at smaller humanoids.

Hardware that is settled, software that keeps moving

The physical platform is built from aircraft-grade aluminium, titanium alloy and high-strength engineering plastics. Each joint is driven by a low-inertia, high-speed internal-rotor permanent magnet synchronous motor, and the joint outputs run on industrial-grade crossed roller bearings chosen for high precision and high load capacity. Local air cooling manages heat in the drive system. On top of that fixed foundation, Unitree positions the H2 series as a platform whose behaviour improves over time: the manufacturer states that its algorithms evolve continuously via OTA, and that the series supports precise dynamic movement replication. Perception comes from a humanoid binocular camera with a wide field of view, while an array microphone and a high-power speaker handle voice interaction.

Technical Specifications

Specifications are as published by the manufacturer and are confirmed against the datasheet at quotation.

The manufacturer has not published the walking speed, the IP rating, the camera resolution, the charging time, the operating temperature or the carton dimensions, nor exactly what the Standard A configuration contains, whether it includes dexterous hands and which software and SDK support comes with it; all of these are confirmed at quotation.

What does the H2 EDU add over the H2?

The two versions share the same body: identical standing dimensions, weight, payload, battery, sensing, connectivity and accessories. The difference lies in computing. Both carry PC1, an Intel Core i5 dedicated to the platform's own capabilities, which runs the robot's built-in functions. The H2 EDU adds PC2, an Intel Core i7 reserved for custom development, so that a team's own code runs alongside the platform software rather than competing with it. The EDU version can also take a compute module up to Jetson AGX Thor, rated at 2070 TOPS, which the manufacturer describes as supporting diverse intelligent models for embodied intelligence work.

In practical terms, a buyer who intends to use the robot as Unitree delivers it, for demonstration, interaction or evaluation of its movement, has a different requirement from a laboratory that plans to train and deploy its own models on board. Which of the two versions the Standard A configuration corresponds to is not stated in the published material, so Robots Middle East confirms it in writing as part of the quotation.

How long can the Unitree H2-A Standard A Humanoid Robot work between charges?

The H2 series runs on a 15Ah battery with a capacity of 0.972KWh and a maximum voltage of 75.6 V, giving a battery life of about 3h. The battery is a quick-release smart battery, and a charger is supplied, which matters more than the single runtime figure suggests: a team holding a second battery can swap packs and keep a session running rather than waiting for the robot to recharge. Because the charging time is not published, planning for long trials, exhibitions or teaching days is best done with Robots Middle East at the quotation stage, including whether additional batteries make sense for the intended schedule.

Who is the Unitree H2-A Standard A Humanoid Robot for?

University departments and research institutes working on locomotion, whole-body control and embodied intelligence are the most natural owners of a full-size humanoid. The 31 degrees of freedom and the dynamic movement replication give researchers a platform on which control methods can be tested at human scale, and the OTA updates mean the baseline behaviour continues to improve during a multi-year programme. Groups that expect to run their own software on board should look closely at the H2 EDU, whose dedicated Intel Core i7 development computer and optional Jetson AGX Thor module are designed for exactly that work.

System integrators and industrial innovation teams form a second group. For them, the arm payload of about 7 kg rated and about 15 kg peak, the industrial-grade bearings and the human-sized frame are the starting points for judging whether a humanoid can take on tasks in spaces built for people. Technology centres, museums and corporate visitor facilities make up a third group, where the binocular camera, array microphone and high-power speaker support interaction with an audience.

The H2-A range is also offered in other lettered configurations, among them the Unitree H2-A Standard B Humanoid Robot, the Unitree H2-A Standard C Humanoid Robot and the Unitree H2-A Standard M Humanoid Robot. The published material does not set out how these packages differ, so we recommend comparing them with Robots Middle East before choosing.

What is the Unitree H2-A Standard A Humanoid Robot used for?

1. Locomotion research: testing balance, gait and whole-body control on a full-size humanoid frame.
2. Embodied intelligence: developing and evaluating intelligent models that perceive, decide and act in the physical world.
3. Manipulation trials: assessing reaching and carrying tasks within the published rated and peak arm payloads.
4. Teaching and training: giving students hands-on experience with a humanoid platform, its sensors and its control software.
5. Human–robot interaction: studying voice and visual interaction using the array microphone, speaker and binocular camera.
6. Exhibitions and showcases: presenting advanced robotics to visitors, partners and the public at human scale.

Pricing and Availability

The Unitree H2-A Standard A Humanoid Robot is supplied on quotation, so that the configuration, the computing option and any additional batteries or accessories match the intended work. Delivery, customs and support are arranged with the quotation. Please contact Robots Middle East with your application, site location and timeline, and we will prepare a written proposal with the confirmed specification. The quotation request is available on this page.

Frequently Asked Questions

How tall is the Unitree H2-A Standard A Humanoid Robot?

The H2 series has a 180 cm humanoid design, and the published standing dimensions are 1820 x 456 x 218mm (H x W x D).

How much does the robot weigh?

The weight with the battery fitted is about 70kg.

How much can its arms carry?

The arm maximum payload is about 7 kg rated and about 15 kg peak.

Does the robot receive software updates?

Yes. Unitree states that the H2 series algorithms evolve continuously via OTA updates.

What connectivity does it offer?

The robot supports WiFi 6 and Bluetooth 5.2, and a manual controller is included among the accessories.

Are dexterous hands included in the Standard A configuration?

The published material does not state whether the Standard A configuration includes dexterous hands. Robots Middle East confirms the exact contents of the package in the quotation.

Where can I buy the Unitree H2-A Standard A Humanoid Robot and what does it cost?

You can buy it from Robots Middle East, which supplies the robot across the Middle East. The cost depends on the confirmed configuration and is set out in a written quotation, which you can request on this page.

Summary

The Unitree H2-A Standard A Humanoid Robot is best understood as two layers. The first is fixed on delivery: a 180 cm frame of aluminium, titanium alloy and engineering plastics, 31 degrees of freedom, 360N·m of joint torque, PMSM joint motors on crossed roller bearings and a quick-release battery giving about 3h of work. The second keeps developing: OTA algorithm updates, onboard computing and, on the H2 EDU, dedicated development hardware for teams that want to build their own intelligence on top. Choosing well means confirming which configuration Standard A represents and what it includes, and Robots Middle East settles those points in writing before you commit. For anyone planning a humanoid programme in the region, this page is the starting point.