OrionStar CleaniBot M1 Commercial Scrubbing & Mopping Robot

A self-docking floor robot that scrubs, sweeps and dust-mops commercial floors, then returns to its station to recharge, take on clean water and drain its wastewater. Robots Middle East supplies it to offices, hospitals and schools that require dependable floor care with minimal supervision.

In stock

BRAND:
ORIONSTAR
MODEL:
CLEANIBOT M1
ORIGIN:
China
AVAILABILITY:
SUBJECT TO AVAILABILITY
SKU:
OrionStar-CleaniBot-M1

OrionStar CleaniBot M1 Commercial Scrubbing & Mopping Robot

A freshly scrubbed floor is only half finished while it is still wet: until the water is lifted away, the cleanest corridor in the building is also its most slippery. The OrionStar CleaniBot M1 Commercial Scrubbing & Mopping Robot is built around closing that gap. It scrubs, sweeps and dust-mops in a single machine, recovers the dirty water behind its brush with an auto-lifting squeegee, and then returns to its own station to recharge, take on clean water and drain what it has collected. The result is a floor that is left dry and safe, and a cleaning routine that no longer depends on someone being present to fill, empty and plug in the machine.

Robots Middle East supplies the OrionStar CleaniBot M1 to facilities across the Middle East and prepares each quotation for the specific site in question. From the first enquiry through to delivery and after-sales support, Robots Middle East remains your point of contact, so that questions about floor types, docking locations and day-to-day operation are answered by the same team that supplies the robot.

Background

OrionStar and its family of service robots

OrionStar develops service robots for commercial buildings, and its range extends well beyond floor care. Alongside the CleaniBot cleaning line, the brand offers reception robots such as the GreetingBot series and delivery robots such as the CarryBot. This breadth matters to a facility operator: the cleaning robot belongs to a manufacturer whose focus is machines that work in public, occupied spaces, sharing corridors and lobbies with staff, patients, students and visitors. You may browse the wider range on the OrionStar category page.

Positioning: an autonomous workhorse for commercial floors

OrionStar describes the CleaniBot M1 as a fully autonomous cleaning workhorse designed for modern commercial environments. Its defining idea is integration. Rather than asking a building to run a scrubber for hard stains and a separate machine for dry dust, the M1 combines scrubbing, sweeping and dust mopping in one versatile system, with three cleaning modes: scrubbing, dust mopping and water absorption. The second strand of its design is self-sufficiency. An autonomous charging dock and an automatic water refilling station allow the robot to recharge, refill with clean water and drain wastewater independently, which is what turns a cleaning machine into a cleaning service that runs to a schedule.

Technical Specifications

SpecificationValue
Dimensions (LWH)775 x 681.5x 1012mm
Net weight121.7 kg
Max. operating speed1.2 m/s
Max. obstacle climbing20 mm
Max. gradeability8°
Min. passing width780 mm
Noise levelScrubbing <78dB(A); Dust Mopping <65dB(A)
Battery specification28.8 Vdc, 60 Ah
Charging time2 h
Battery life (operating time)Scrubbing: 3.5h; Mopping: 8h
Cleaning width (main brush)500 mm
Roller brush50cm floating pressurised dual roller brush
Squeegee68cm auto-lifting squeegee
Max. cleaning efficiency1200㎡/h
Clean water tank capacity35 L
Waste water tank capacity33 L
Maximum garbage height5cm
Dust bin capacity0.9L
Sensors11
Network connectivityWi-Fi / 4G
Cleaning modesScrubbing, Dust Mopping, Water absorption

Specifications are as published by the manufacturer and are confirmed against the datasheet at quotation.

The manufacturer has not published the rated power, the IP rating, the scrubbing pressure, the contents of the box, the map capacity, the types of obstacle sensor or the replacement intervals for the brush and squeegee; all of these are confirmed at quotation.

How does the CleaniBot M1 clean without staff on hand?

Most autonomous scrubbers can navigate on their own; what usually brings them to a halt is water and power. A scrubber empties its clean tank, fills its waste tank and drains its battery, and at that point a member of staff has to intervene. The CleaniBot M1 addresses all three at its station. The autonomous charging dock recharges the 28.8 Vdc, 60 Ah battery in a charging time of 2 h, while the automatic water refilling station tops up the 35 L clean water tank and drains the 33 L waste water tank. For a site manager, this changes the role of the cleaning team from operating the machine to supervising it.

On the floor itself, the 50cm floating pressurised dual roller brush maintains consistent ground pressure so that heavy stains can be lifted, and the 68cm auto-lifting squeegee, wider than the brush path, recovers the water behind it so that floors are left dry and safe. Eleven sensors handle obstacle detection, real-time path adjustment and navigation in dynamic environments, which is essential in buildings where people, trolleys and furniture are constantly on the move. Scheduled tasks and digital reports complete the picture: the robot can be set to clean at defined times, and the reports give supervisors a record of what has been cleaned.

Scrubbing or dust mopping: which mode suits which situation?

The two principal modes differ in more than method, and the figures make the trade-off clear. Scrubbing is the heavier task, with a noise level below 78dB(A) and an operating time of 3.5h on a charge. Dust mopping is quieter, below 65dB(A), and runs for 8h. In practice, many facilities will find it sensible to schedule wet scrubbing for periods when a building is empty or lightly occupied, and to use dust mopping where people are present and a quieter machine is preferable. The water absorption mode adds a third option for recovering liquid from the floor. Because the robot can return to its dock to recharge in 2 h, longer cleaning programmes can be planned around charging cycles rather than around staff shifts.

Site layout also deserves attention before you order. The minimum passing width is 780 mm, the maximum obstacle climbing height is 20 mm and the maximum gradeability is 8°, so doorways, thresholds and ramps should be checked against these figures during the site survey. Robots Middle East reviews these points with you as part of the quotation.

Who is the CleaniBot M1 for?

OrionStar positions the M1 for medium to large-sized spaces such as office complexes, hospitals and schools, and those three settings describe its natural buyers well. Facility managers of office complexes will value scheduled cleaning of lobbies and corridors outside working hours, together with digital reports that document the work. Hospital estates teams, for whom dry, safe floors and a predictable routine matter greatly, will appreciate the squeegee recovery and the self-managed water cycle. Schools and universities, with their long corridors and large halls, can assign repetitive floor care to the robot and redeploy cleaning staff to tasks that require human judgement.

Contract cleaning companies serving several buildings are a further segment: Wi-Fi / 4G connectivity and digital reporting support oversight of a robot that works without a dedicated operator beside it. If your requirements differ, for example in floor area or the type of cleaning needed, OrionStar offers other cleaning robots that Robots Middle East can compare with the M1 for you, including the OrionStar CleaniBot C5 Commercial Cleaning / Scrubbing Robot, the OrionStar CleaniBot K1 and the OrionStar CleaniBot S55 Pro Commercial Floor Scrubber Robot.

What is the CleaniBot M1 used for?

  1. Office complexes – scheduled scrubbing of lobbies, lift halls and corridors before staff arrive.
  2. Hospitals – routine wet cleaning of corridors with the squeegee leaving floors dry behind the robot.
  3. Schools and universities – covering long corridors and assembly halls on a fixed timetable.
  4. Quiet daytime upkeep – dust mopping in occupied areas, where the lower noise level is an advantage.
  5. Stain removal on hard floors – pressurised roller brushes for marks that dry mopping leaves behind.
  6. Documented cleaning – digital reports that support audits, service agreements and contract verification.

Pricing and Availability

Robots Middle East supplies the CleaniBot M1 on quotation, prepared for your building, your floor areas and the number of units you require. Delivery, customs clearance and support are arranged together with the quotation, so that the whole project is set out in a single document. To begin, simply send us a brief description of your site and its cleaning schedule; a request for a quotation is available on this page.

Frequently Asked Questions

Which cleaning modes does the CleaniBot M1 offer?

It offers three modes: scrubbing, dust mopping and water absorption. Scrubbing, sweeping and dust mopping are integrated into a single system.

Does the robot refill and empty its own water?

Yes. Its automatic water refilling station refills clean water and drains wastewater, while the autonomous charging dock recharges the battery.

How long does the CleaniBot M1 run on one charge?

The operating time is 3.5h in scrubbing mode and 8h in mopping mode. The charging time is 2 h.

How much floor can it clean per hour?

The maximum cleaning efficiency is 1200㎡/h, with a main brush cleaning width of 500 mm.

Can it be scheduled and monitored remotely?

It supports scheduled tasks, generates digital reports and connects over Wi-Fi / 4G.

Can the robot handle thresholds, ramps and narrow doorways?

The maximum obstacle climbing height is 20 mm, the maximum gradeability is 8° and the minimum passing width is 780 mm. Robots Middle East checks these figures against your site layout before delivery.

Where can I buy the OrionStar CleaniBot M1 and what does it cost?

You can buy it from Robots Middle East, which supplies it across the Middle East. The cost depends on your configuration and project, so please request a quotation from this page.

Summary

The CleaniBot M1 is designed on the principle that cleaning is only complete once the floor is dry and the machine is ready to go again. Its pressurised dual roller brush and auto-lifting squeegee address the first part of that principle; its charging dock and water station, which recharge, refill and drain without assistance, address the second. Eleven sensors, scheduled tasks and digital reports allow it to work in office complexes, hospitals and schools with minimal human intervention, while its three cleaning modes let one machine cover both heavy wet cleaning and quieter dry upkeep. If you are planning floor care that runs to a schedule rather than to staff availability, this page is the starting point.

Specifications

General

BRAND ORIONSTAR
MODEL CLEANIBOT M1

Product Questions

No questions yet. Be the first to ask.

0/255

Write a Review
You're reviewing: OrionStar CleaniBot M1 Commercial Scrubbing & Mopping Robot
loader
Loading...

You submitted your review for moderation.