Casbot Handle L1 Dexterous Robotic Hand
In stock
- BRAND:
- CASBOT
- PART #:
- Handle L1
- ORIGIN:
- China
- AVAILABILITY:
- SUBJECT TO AVAILABILITY
- SKU:
- Casbot-Handle-L1
Casbot Handle L1 Dexterous Robotic Hand
When a robotics project moves from one prototype on a laboratory bench to a fleet of machines that work every day, the questions asked of a robotic hand change. Elegance on a single demonstration matters less. Cost per unit, stability, service life and how quickly a hand can be fitted and put to work matter far more. The Casbot Handle L1 Dexterous Robotic Hand is designed for that second stage. CASBOT Hands built it around cost efficiency, stability, long service life and ease of deployment. It has a lightweight structure and a streamlined degree-of-freedom configuration, rather than the largest possible number of joints.
Robots Middle East supplies the Casbot Handle L1 across the Middle East to system integrators, universities, research laboratories and companies developing humanoid and arm-based robots. Our team prepares each quotation, coordinates delivery to your facility and remains your point of contact for technical questions and after-sales support once the hand is in service.
Background
CASBOT Hands and its roots in CASBOT
CASBOT Hands is an embodied intelligence company specialising in robotic dexterous manipulation. It was established in July 2026 as a technology company focused on dexterous hands and embodied manipulation, and it was jointly founded by CASBOT, Lens Technology and Hunan Huaxia Investment Group. Its product and technology foundation comes from CASBOT, a Beijing-based robotics company that has spent several years developing embodied intelligence technologies and deploying them in real-world environments. This lineage matters when you assess the hand. It comes from a group whose work began with complete robots operating outside the laboratory, not from a component supplier working in isolation. You can browse the wider range on our Casbot page.
Where the L1 sits in the range
The L1 was introduced on 7 August in Changsha, China, together with two other dexterous hands, the D1 and the M1. CASBOT Hands has also previewed an F Series. Within this family, the L1 takes the deliberately simpler position. The D1 is positioned as a general-purpose five-finger dexterous hand with a higher degree of freedom. The L1 instead reduces the number of degrees of freedom to simplify the control system and lower product cost. The L1 had already been seen in public before the Changsha launch. At the World Artificial Intelligence Conference, four robots equipped with the hand formed the CASBOT BAND and performed live music on real instruments: guitar, bass, keyboard and drums. That performance relied on repeated, well-timed movements sustained over a full set, which is the kind of work the L1 is meant for.
Technical Specifications
| Specification | Value |
|---|---|
| Brand | CASBOT |
| Manufacturer | CASBOT Hands |
| Model | L1 |
| Product type | Dexterous robotic hand |
| Design concept | Lightweight design with a streamlined degree-of-freedom configuration |
| Design priorities | Cost efficiency, stability, long service life, ease of deployment |
| Motion characteristics | Relatively fast opening, closing and response |
| Intended duty | High-frequency movements and continuous operation |
| Effect on the robotic arm | Lightweight structure reduces the load at the end of the arm |
| Launch | 7 August, Changsha, China, alongside the D1 and M1 |
| Public demonstration | World Artificial Intelligence Conference (CASBOT BAND) |
Specifications are as published by the manufacturer and are confirmed against the datasheet at quotation.
The manufacturer has not published the degrees of freedom, weight, dimensions, grip force, payload, opening and closing speed, communication interface, operating voltage, tactile sensing, actuation type, box contents, software and SDK, or the list of compatible robot arms; Robots Middle East confirms each of these with you at quotation.
What makes the Casbot Handle L1 different from the D1?
The two hands were launched on the same day by the same company, but they answer different questions. The D1 is the general-purpose option. It is a five-finger dexterous hand with a higher degree of freedom, intended for buyers who need broad manipulation capability and are prepared to manage the control complexity that comes with it.
The L1 starts from the opposite end. It has fewer degrees of freedom, so there are fewer joints for the control system to coordinate. This simplifies the control system and lowers product cost. The lightweight structure reduces the load on the end of the robotic arm. The L1 is also built for relatively fast opening, closing and response, aimed at high-frequency movements and continuous operation.
In practice, the choice depends on the task. If the work involves a wide variety of objects and complex in-hand movements, the D1 deserves a closer look. If the work is repetitive, runs for long periods and must be cost-effective across several robots, the L1 is the better fit. Robots Middle East can help you compare both against your application before you commit.
Why choose a hand with fewer degrees of freedom?
It is tempting to treat degrees of freedom as a score, where more is always better. In deployment the picture is more balanced. Each additional actuated joint adds a component that must be controlled, calibrated and eventually serviced. It also adds to the cost of the hand and often to its mass, which the arm has to carry and accelerate with every movement.
The L1 is designed for this trade-off. By simplifying the degree-of-freedom configuration, CASBOT Hands targets lower cost, a simpler control system and a lighter load at the arm's end. It also targets stability and long service life, which matter most once a robot leaves the demonstration floor and starts a working routine. Its relatively fast opening, closing and response are intended for high-frequency, continuous work. For many grasping tasks in research and industry, a hand that does a limited set of movements quickly and reliably is worth more than one that can do everything but needs constant attention.
Who is the Casbot Handle L1 for?
The first group is system integrators building cells or robots that repeat the same handling motions many times over a shift. For them, stability, service life and fast actuation matter more than the widest possible range of finger movement. The second group is teams mounting a hand on a robotic arm, where every reduction in end-of-arm load helps the arm's performance and leaves more of its capacity for the task.
The third group is research laboratories and universities that plan to equip several robots rather than one. Lower product cost and ease of deployment make it more practical to scale an embodied intelligence programme across a number of platforms. Developers working on humanoid robots form the fourth group. They may value a hand that keeps the control problem manageable while they concentrate on perception, planning and learning.
If your application calls for broad, general-purpose dexterity, the D1, with its higher degree of freedom, may suit you better, and Robots Middle East can advise on it on request. Buyers comparing variants within the same line can also review the Casbot Handle L1 PRO Dexterous Robotic Hand; our team can set out how it differs from the L1 for your application. Other options are listed in our Robot Hands category.
What is the Casbot Handle L1 used for?
- Repetitive handling: grasp-and-release cycles where fast opening, closing and response keep a process moving.
- Continuous operation: long working sessions in which stability and service life matter more than variety of movement.
- Arm-mounted end-effector work: applications where a lighter hand reduces the load at the tip of a robotic arm.
- Humanoid robot development: giving a humanoid platform a hand with a simpler control system to integrate.
- Embodied intelligence research: equipping several research robots economically for manipulation experiments and data collection.
- Demonstrations and public engagement: shows and exhibitions built on timed, repeated movements, in the spirit of the CASBOT BAND.
Pricing and Availability
Robots Middle East supplies the Casbot Handle L1 on a quotation basis, so that the offer reflects your configuration, quantity and integration requirements. Delivery, customs and support are arranged with the quotation. Our team reviews your robot, your task and your integration plan with you, so that you can check the hand against your project before ordering. To start the process, please submit your requirements through the quotation request available on this page.
Frequently Asked Questions
Who manufactures the Casbot Handle L1?
The hand is made by CASBOT Hands, a company focused on dexterous hands and embodied manipulation. It was jointly founded by CASBOT, Lens Technology and Hunan Huaxia Investment Group, and its technology foundation comes from the Beijing-based robotics company CASBOT.
How many degrees of freedom does the L1 have?
The L1 uses a streamlined degree-of-freedom configuration, with fewer degrees of freedom than the D1. The exact count is among the items listed beneath the specification table.
Is the L1 suitable for continuous operation?
Yes. Its relatively fast opening, closing and response are intended for high-frequency movements and continuous operation, and stability and long service life are among its design priorities.
Which robot arms or humanoids is the L1 compatible with?
Compatible robot arms, the communication interface and the operating voltage are among the items listed beneath the specification table. Please tell us which platform you use, and our engineers will check it against the hand.
Where has the L1 been demonstrated?
It was demonstrated at the World Artificial Intelligence Conference, where four robots fitted with the hand formed the CASBOT BAND and played guitar, bass, keyboard and drums live. It was then formally launched in Changsha, China, alongside the D1 and M1.
Does the L1 come with software or an SDK?
Software, SDK and box contents are also among the items listed beneath the specification table. Your quotation from Robots Middle East sets out exactly what is supplied with the hand.
Where can I buy the Casbot Handle L1 and what does it cost?
You can buy the Casbot Handle L1 from Robots Middle East, which supplies it across the Middle East. Pricing is provided by quotation according to your configuration and quantity, so please request a quote on this page.
Summary
The step from one prototype to a working fleet is where a robotic hand proves its value. The Casbot Handle L1 is designed for that step. It comes from CASBOT Hands, a company built on CASBOT's experience of deploying embodied intelligence in real environments. It keeps its degree-of-freedom configuration streamlined to simplify control and lower cost, keeps its structure light to reduce the load on the arm, and is built for fast, high-frequency, continuous work. Where broader dexterity is required, the D1 is available in the same family. For buyers who need dependable, economical manipulation across several robots in the Middle East, Robots Middle East quotes, delivers and supports the hand, and this page is the starting point.