Elephant Robotics Technology Mycobot 320 Pi Robot Arm (4010100023)
In stock
- BRAND:
- ELEPHANT ROBOTICS
- PART #:
- 4010100023
- ORIGIN:
- China
- AVAILABILITY:
- SUBJECT TO AVAILABILITY
- SKU:
- Elephant Robotics Technology-4010100023
Elephant Robotics Technology Mycobot 320 Pi Robot Arm (4010100023)
Every robotics programme knows the moment when code that behaved perfectly in simulation meets real hardware, and the gap between the two proves wider than planned. Drivers differ, libraries have to be rebuilt, and a separate control computer must be configured before a single joint moves. The Elephant Robotics Technology Mycobot 320 Pi Robot Arm (4010100023) narrows that gap by carrying its own computer. A Raspberry Pi 4B with Ubuntu 20.04 built in, and support for ROS and Python, means that the environment in which a developer writes and tests is the same environment that drives the arm.
Robots Middle East supplies the Elephant Robotics Technology Mycobot 320 Pi Robot Arm (4010100023) to universities, schools, research laboratories and engineering teams across the Middle East. Robots Middle East prepares each quotation for the configuration requested, arranges delivery to the customer's site and remains the point of contact for technical support once the arm is in service.
Background
Elephant Robotics and the myCobot series
Elephant Robotics builds compact collaborative robot arms for education, research and development work, and the myCobot family is its best-known line. The whole series has been sold to more than 60 countries, with over 5,000 units shipped. For a buyer, that reach has a practical meaning: a platform used widely in teaching and research tends to gather a substantial body of tutorials, shared code and community experience, which shortens the learning curve for a new team. The family includes several arms built around different controllers, among them the Elephant Robotics Technology Mycobot-280 Jetson Nano (4010100018) and the Elephant Robotics myCobot Pro 630 Robot Arm (4010200011), so an organisation can standardise on one manufacturer's software approach across different projects.
A joint product with Raspberry Pi
The Raspberry Pi versions of the arm are a joint product developed by Elephant Robotics and Raspberry Pi. The controller is a Raspberry Pi 4B built on the Broadcom BCM2711 system-on-chip, and the arm ships with Ubuntu 20.04 built in. This choice of platform is deliberate. Raspberry Pi hardware is already familiar in classrooms, maker spaces and university laboratories, and Ubuntu is the operating system on which much of the ROS ecosystem is developed and documented. Rather than asking users to learn a closed controller, the arm meets them on ground they are likely to know. Alongside the computing platform, the 2022 version adds kinematics self-interference detection, which can effectively avoid motion collisions between the arm's own parts.
Technical Specifications
| Specification | Value |
|---|---|
| Manufacturer SKU | 4010100023 |
| Version | myCobot 320 Pi 2022 |
| Controller platform | Raspberry Pi 4B |
| System-on-chip | Broadcom BCM2711 |
| Built-in operating system | Ubuntu 20.04 |
| Software support | ROS and Python |
| Safety function | Kinematics self-interference detection, which can effectively avoid motion collisions |
| Development | Joint product of Elephant Robotics and Raspberry Pi |
Specifications are as published by the manufacturer and are confirmed against the datasheet at quotation. The manufacturer has not published the dimensions, the IP rating, the box contents or the cable length; Robots Middle East confirms these with the quotation.
What difference does an onboard Raspberry Pi make to a robot arm?
Many robot arms depend on an external computer to plan and send motion. That arrangement works, but it adds a second machine to configure, a connection to maintain and a further point at which versions can drift apart. When the controlling computer sits inside the product, the arm becomes a self-contained development station: a user connects, opens the familiar Ubuntu environment and starts working.
For teams working with ROS, the benefit is continuity. Ubuntu is the natural home of ROS, so packages, launch files and tools behave as they do on a developer's own workstation. Python support lowers the threshold further, allowing students and engineers to write short scripts that move the arm without first mastering a full robotics framework. A lecturer can begin a course with simple Python exercises and progress to ROS-based projects on the same hardware, without changing the platform part-way through the term.
The Raspberry Pi foundation also matters beyond the arm itself. Staff who already maintain Raspberry Pi devices for other courses or projects can apply the same habits to this one, from managing software updates to sharing configurations across a laboratory. That familiarity is often worth as much as any single specification when an institution plans a fleet of teaching stations.
How does the myCobot 320 Pi guard against collisions with itself?
An arm with several joints can, if commanded carelessly, bring one of its own links into contact with another. In a teaching laboratory, where students experiment with unfamiliar trajectories, this is a common source of interrupted sessions and avoidable wear. The myCobot 320 Pi 2022 addresses it with kinematics self-interference detection, which can effectively avoid motion collisions of this kind.
In practice, this gives learners and developers more room to experiment. A trajectory that would fold the arm into itself is caught by the kinematic check rather than discovered through contact. It is worth being clear about scope: self-interference detection concerns the arm's own geometry. Any installation near people or other equipment still calls for a risk assessment of the workspace, as with any collaborative robot, and Robots Middle East can discuss the intended set-up when preparing the quotation.
Who is the Elephant Robotics Technology Mycobot 320 Pi Robot Arm (4010100023) for?
The clearest audience is education. Universities, technical colleges and secondary schools teaching robotics, programming or mechatronics gain an arm that runs the same operating system and tools students will meet in research and industry, with Python as a gentle entry point and ROS as the next step.
Research groups form a second segment. Laboratories working on motion planning, manipulation or human–robot interaction need a platform on which ROS code can move from simulation to hardware with as little friction as possible, and an onboard Ubuntu computer serves that need directly.
Developers and engineering teams building proof-of-concept automation make up a third. Here the arm acts as a test bench for ideas that may later be scaled up to industrial equipment, and the Raspberry Pi platform keeps early experiments inexpensive in time and effort.
The series includes other versions that may suit particular buyers better. Teams that want an end effector from the outset can request the myCobot 320 PI 2022 bundled with the myGripper F100 or with the Electric Parallel Gripper, both of which the manufacturer lists as separate versions. Buyers who prefer a different controller can compare the Elephant Robotics Technology Mycobot 320 M5-Robot Arm (4010100021), and those still weighing their options can browse the wider Robot Arms category.
What is the Elephant Robotics Technology Mycobot 320 Pi Robot Arm (4010100023) used for?
- Robotics teaching: a classroom arm on which students progress from Python scripts to full ROS projects.
- ROS research: a hardware target for motion-planning and manipulation work developed on Ubuntu.
- Automation prototyping: a bench platform for testing pick, place and sorting concepts before larger investment.
- Vision experiments: a base for vision-guided handling studies once a suitable camera and gripper are integrated.
- Human–robot interaction studies: a compact collaborative arm for research into how people and robots share tasks.
- Demonstrations and exhibitions: a self-contained system for showing robotics capability at open days and events.
Pricing and Availability
Robots Middle East supplies the arm on quotation, so that the version, any gripper bundle and the support required are specified correctly from the start. Delivery, customs clearance and technical support are arranged with the quotation. Please share your intended application and the number of units you need, and the request form for the Elephant Robotics Technology Mycobot 320 Pi Robot Arm (4010100023) is available on this page.
Frequently Asked Questions
Which computer controls the arm?
The arm is powered by a Raspberry Pi 4B built on the Broadcom BCM2711 system-on-chip. It is a joint product developed by Elephant Robotics and Raspberry Pi.
Which operating system does it run?
The myCobot 320 Pi 2022 comes with Ubuntu 20.04 built in, so no separate installation is needed before development begins.
Can I programme it with ROS and Python?
Yes. The platform has built-in support for both ROS and Python, which allows simple scripting for beginners and full ROS workflows for advanced users.
Does the arm protect itself against collisions?
It has kinematics self-interference detection, which can effectively avoid motion collisions between the arm's own parts. A risk assessment of the surrounding workspace remains good practice for any installation.
Can I order the arm with a gripper?
The manufacturer offers versions bundled with the myGripper F100 or the Electric Parallel Gripper. Please state your preferred configuration when you request a quotation from Robots Middle East.
How widely is the myCobot series used?
The whole series has been sold to more than 60 countries, with over 5,000 units shipped. That user base brings a broad community of shared code and teaching material behind the platform.
Where can I buy the Elephant Robotics Technology Mycobot 320 Pi Robot Arm (4010100023) and what does it cost?
Robots Middle East supplies the arm across the Middle East on quotation. The cost depends on the version, any bundled gripper and the delivery and support arrangements, so please request a quotation through this page.
Summary
The distance between simulated motion and real movement is where many robotics projects lose time. The Elephant Robotics Technology Mycobot 320 Pi Robot Arm (4010100023) shortens it by placing a Raspberry Pi 4B, Ubuntu 20.04, ROS and Python inside the arm itself, so that code moves from screen to joint within one familiar environment. Kinematics self-interference detection adds confidence when trajectories are new, and a series shipped to more than 60 countries brings a broad community behind the platform. For institutions and teams in the Middle East that want to teach, research or prototype on that footing, with Robots Middle East handling supply and support, and for those comparing the wider range of Cobots, this page is the starting point.