Elephant Robotics myCobot Pro 630 Robot Arm (4010200011)
In stock
- BRAND:
- ELEPHANT ROBOTICS
- PART #:
- 4010200011
- ORIGIN:
- China
- AVAILABILITY:
- SUBJECT TO AVAILABILITY
- SKU:
- Elephant-Robotics-4010200011
Elephant Robotics myCobot Pro 630 Robot Arm (4010200011)
Most robot arms bought for a teaching laboratory are switched off when the last lecture ends, while arms bought for a production cell rarely leave that cell to be studied. The Elephant Robotics myCobot Pro 630 Robot Arm (4010200011) is built to bridge those two worlds. It is a collaborative robot designed for education, research and light industrial automation. It runs a customised Linux operating system and the proprietary Roboflow control software, so it can support uninterrupted applications 24/7. It also stays open to ROS1, ROS2 and Gazebo for anyone who wishes to study, adapt and simulate it in software before a single joint moves.
Robots Middle East supplies the myCobot Pro 630 to universities, research centres, technical colleges, training institutes and industrial integrators across the Middle East. Robots Middle East prepares each quotation for the configuration you require, whether the arm alone or one of its end-effector bundles. It also coordinates delivery to your site and remains your point of contact for technical support once the arm is in service.
Background
Elephant Robotics and the myCobot family
Elephant Robotics has built its reputation on collaborative arms that make industrial-style robotics accessible to classrooms, laboratories and smaller workshops. The myCobot name now covers a range of arms, from the compact myCobot 280 and myCobot 320 models to the Pro line. Within that range, the myCobot Pro 630 follows the myCobot Pro 600. Elephant Robotics reduced its size by 30% compared with the Pro 600 without compromising payload capacity. For an organisation that has to share bench space between students, researchers and pilot production work, that change in footprint counts.
An open control stack built for continuous work
The arm's character is defined as much by its software as by its mechanics. A customised Linux operating system hosts Roboflow, Elephant Robotics' own robot control software, and together they support uninterrupted applications 24/7. Alongside this native environment, the arm is supported in ROS1, ROS2 and the Gazebo simulation environment. Elephant Robotics provides open-source robot control driver files, so research groups can integrate the arm into existing ROS workflows. They can also test motion plans in simulation and share their code with collaborators. Safety is handled by an anti-collision detection function based on a precise dynamic model, which enables the arm to work well alongside people, and by built-in emergency stop functionality.
Technical Specifications
| Specification | Value |
|---|---|
| Robot type | Collaborative robot arm |
| Intended use | Education, research and light industrial automation |
| Size compared with myCobot Pro 600 | Reduced by 30%, without compromising payload capacity |
| Operating system | Customised Linux |
| Control software | Roboflow (proprietary) |
| Continuous operation | Supports uninterrupted applications 24/7 |
| Simulation and middleware support | ROS1, ROS2, Gazebo |
| Driver files | Open-source robot control drivers provided |
| Collision detection | Anti-collision detection based on a precise dynamic model |
| Emergency stop | Built-in |
Specifications are as published by the manufacturer and are confirmed against the datasheet at quotation.
Elephant Robotics has not published the weight, IP rating, maximum joint speed, operating temperature, power consumption, package contents, noise level or mounting dimensions; Robots Middle East confirms these details with your quotation.
What makes the myCobot Pro 630 different from the myCobot Pro 600?
The main difference is in proportion. Elephant Robotics designed the myCobot Pro 630 to be 30% smaller than the myCobot Pro 600 while keeping its payload capacity. In practice, a smaller arm is easier to place on a shared laboratory bench, to fit into a compact training cell or to mount beside a conveyor where space is already allocated. Usually, reducing the size of an arm means accepting that it will carry less. Here, the lifting capability stays the same and the space required goes down.
The second point is the software. Because the arm combines its own Roboflow environment with open support for ROS1, ROS2 and Gazebo, one machine can serve two kinds of user. An operator who needs a stable, repeatable routine can work in Roboflow and run that routine around the clock. A researcher who needs full control can use the open-source drivers and develop in ROS. This dual character is what allows a single arm to move between a teaching laboratory and a pilot production line without changing its platform.
Which configuration of the myCobot Pro 630 should I choose?
The arm is offered on its own or in four bundles, each pairing it with a different end-effector. The arm-only version suits buyers who already have tooling, or who intend to design their own. The myGripper H100 and myGripper F100 bundles add a gripper for grasping tasks. They are the natural choice for pick-and-place exercises, assembly training and manipulation research. The myCobot Pro Camera Flange bundle prepares the arm for vision-guided work, such as identifying and locating parts before picking them. The bundle with MyCobot Pro Vacuum Suction Cups & Air Compressor supplies a complete suction set-up for handling objects that a gripper would struggle to hold. Robots Middle East confirms the exact contents of each bundle in the quotation.
Who is the myCobot Pro 630 for?
Universities and technical colleges form the first group. A collaborative arm with an anti-collision function and a built-in emergency stop is well suited to supervised teaching, where students work close to the machine. Support for ROS1 and ROS2 lets course material follow the tools used in industry and research.
Research laboratories are the second group. Gazebo support and open-source driver files allow algorithms to be developed in simulation and then transferred to the physical arm. Groups working on grasping or dexterous manipulation may find the bundle with the myGripper H100 a better starting point than the arm alone. Teams that need individual hands can also look at the Elephant Robotics myGripper H100 Left + Right Hand (4010700098). Those working in machine vision will be better served by the Camera Flange bundle.
The third group consists of manufacturers and system integrators exploring light industrial automation. For them, the ability to support uninterrupted applications 24/7 matters more than open research tooling. A compact arm that runs a routine steadily through every shift is the core requirement. Buyers comparing several platforms can review the wider Cobots range and the full selection of Robot Arms available from Robots Middle East.
What is the myCobot Pro 630 used for?
- Robotics education — hands-on teaching of kinematics, programming and safe human–robot collaboration.
- ROS research and development — algorithm development in ROS1 or ROS2 using the open-source control drivers.
- Simulation-first prototyping — testing motion plans in Gazebo before running them on the physical arm.
- Pick-and-place automation — light handling tasks with a gripper or suction end-effector.
- Vision-guided manipulation — locating and picking objects with the Camera Flange configuration.
- Continuous pilot production — uninterrupted routines in Roboflow for small-scale automation cells.
Pricing and Availability
Robots Middle East quotes the myCobot Pro 630 for each project. You can select the arm alone or one of its gripper, camera or suction bundles, and the quotation reflects the exact configuration and quantity you need. Delivery, customs clearance and technical support are arranged together with the quotation, so the details are settled before the order is confirmed. To start, please send your intended application, preferred configuration and delivery location using the quotation request available on this page.
Frequently Asked Questions
Is the myCobot Pro 630 safe to use near people?
Yes. It is a collaborative robot with an anti-collision detection function based on a precise dynamic model, which enables it to work well with people. It also has built-in emergency stop functionality.
Can the myCobot Pro 630 run continuously?
Yes. Its customised Linux operating system and Roboflow control software support uninterrupted applications 24/7.
Does the arm work with ROS?
The arm is supported in ROS1 and ROS2 as well as the Gazebo simulation environment. Elephant Robotics provides open-source robot control driver files for integration.
How does it compare in size with the myCobot Pro 600?
The myCobot Pro 630 is 30% smaller than the myCobot Pro 600, and its payload capacity has not been reduced.
Which end-effectors are offered with it?
The arm is available on its own or bundled with the myGripper H100, the myGripper F100, the myCobot Pro Camera Flange, or the MyCobot Pro Vacuum Suction Cups & Air Compressor.
Where can I find the weight, IP rating or mounting dimensions?
Elephant Robotics has not published these figures. Robots Middle East confirms them, together with the package contents, when preparing your quotation.
Where can I buy the Elephant Robotics myCobot Pro 630 Robot Arm (4010200011) and what does it cost?
You can buy it from Robots Middle East, which supplies it across the Middle East. The cost depends on the configuration and quantity you choose and is set out in a quotation that you can request on this page.
Summary
The myCobot Pro 630 is built to avoid the usual choice between an arm for study and an arm for production. A lecture-hall tool usually sits idle once teaching is over, while a production cell is rarely available for experimentation. This arm offers 24/7 operation through Roboflow and research access through ROS1, ROS2 and Gazebo, in a body 30% smaller than the myCobot Pro 600 with no loss of payload capacity. Collision detection and a built-in emergency stop keep it suitable for work alongside people. Its bundles let you equip it for gripping, vision or suction from the outset. For institutions and companies in the Middle East that want one platform to serve teaching, research and light automation, this page is the starting point.