Inspire EG2-4B Dexterous Robot Hand
In stock
- BRAND:
- INSPIRE ROBOTS
- PART #:
- EG2-4B
- ORIGIN:
- China
- AVAILABILITY:
- SUBJECT TO AVAILABILITY
- SKU:
- Inspire-EG2-4B
Inspire EG2-4B Dexterous Robot Hand
On a small robot arm, every gram at the wrist is taken from the work the arm can do. The Inspire EG2-4B Dexterous Robot Hand answers that constraint with a body of 223g. It still offers a 70mm full stroke across both sides, grip force adjustable over 0‑15N and an RS485 serial link for control. It closes its full stroke in 0.85s, locks its position when power is removed and detects a dropped part. The light build therefore does not cost the application a secure hold, and the hand leaves more of the arm’s capacity free for the task.
Robots Middle East sells the Inspire EG2-4B to system integrators, research laboratories, universities and manufacturers throughout the Middle East. Our team prepares your quotation and arranges supply to your site. We remain your point of contact for technical support once the hand is in service, so one partner handles the project from the first enquiry to commissioning.
Background
Inspire Robots and the EG2 family
Inspire Robots is best known in the robotics community for its dexterous robot hands. These multi-fingered units appear on humanoid and research platforms. Alongside them, the brand offers the EG2 family of electric gripping hands, which is aimed at automated operations rather than humanlike manipulation. The EG2 family comprises three versions: EG2-4B, EG2-4C and EG2-5C. This page covers the EG2-4B alone, and every figure quoted here belongs to that version. You can explore the wider range in our Inspire Robots collection.
A linear mechanical linkage at its core
The EG2-4B is built on an innovative linear mechanical linkage design. That design delivers:
- a large stroke
- light weight
- force and position control
- power-off self-locking
In general terms, a linear linkage turns the motion of an electric drive into opening and closing along a straight path. This makes the point of contact easier to plan when a cell is being programmed.
The linkage works together with force-position dual control. This lets an integrator set both how far the hand travels and how firmly it closes. Together with power-off self-locking and drop detection, this combination makes the hand adaptable to automated operations across many industries.
Technical Specifications
| Specification | Value |
|---|---|
| Full stroke (both side) | 70mm |
| Weight | 223g |
| Grip force | 0‑15N |
| Force repeatability | ±1N |
| Positioning repeatability | ±0.50mm |
| Full stroke closing time | 0.85s |
| Maximum speed | 97mm/s |
| Communication interface | RS485 |
| Operating voltage | DC24V±10% |
| Idling current | 30mA |
| Unloaded current | 200mA |
| Peak current | 0.70A |
| Protection level | IP40 |
| Recommended working temperature | 0‑40℃ |
Specifications are as published by the manufacturer and are confirmed against the datasheet at quotation.
The manufacturer has not published the dimensions, package contents, software and control protocol, mounting interface, maximum payload, rated power, service life or a list of compatible robots; these are confirmed at quotation.
How does force-position dual control help with delicate parts?
Many handling tasks have two phases with different requirements:
- Approach: the hand must move quickly and accurately to the right opening width.
- Contact: the hand must stop squeezing at the right moment.
The EG2-4B treats these as separate parameters. Position control governs travel, with a positioning repeatability of ±0.50mm and a maximum speed of 97mm/s. Force control governs the grasp itself, with grip force adjustable over 0‑15N and a force repeatability of ±1N.
This matters when a single cell handles parts of differing fragility. A rigid housing can be gripped firmly. A thin-walled sample tube or a printed part with fine features can be held at a gentler setting, without changing the hardware. Because the force is repeatable, a setting proven during commissioning behaves the same way across a long production or test run.
The 70mm full stroke also widens the range of objects one hand can take. Fewer tool changes may then be needed in a mixed workflow.
What happens to the grip if power fails or a part slips?
The EG2-4B offers power-off self-locking: when the supply is removed, the hand holds its position rather than releasing what it carries. During an emergency stop or an unexpected loss of power, this keeps a gripped part from falling onto the workcell or the operator’s bench.
Drop detection covers the opposite case, where the part leaves the hand while power remains on. The controller can then react, for example by halting the sequence or retrying the pick, instead of carrying on as if the object were still held.
The published current figures are useful for planning the power budget, which is especially relevant for battery-powered mobile manipulators:
- idling current: 30mA
- unloaded current: 200mA
- peak current: 0.70A
The hand runs on DC24V±10%, a common supply level in automation cabinets.
Who is the Inspire EG2-4B for?
The hand suits teams who need a light, electrically controlled gripping hand they can command directly over a serial bus. The main groups are:
- System integrators fitting small collaborative arms or mobile manipulators, where the 223g weight helps preserve the arm’s capacity for the task.
- Research laboratories and universities, which benefit from programmable force and position. These make the hand a practical tool for grasping studies, teaching and reproducible experiments.
- Manufacturers running light automation, such as handling small components, test fixtures or packaging steps.
- Developers of service robots that must handle everyday objects with care.
The recommended working temperature of 0‑40℃ and the IP40 protection level point towards indoor, climate-controlled environments. In the Middle East, this is worth reviewing at the planning stage for sites where ambient temperatures can exceed that range.
The EG2 family also includes the Inspire EG2-4C Dexterous Robot Hand (EG2-4C) and the EG2-5C. Our team will compare the versions against your task during quotation.
Some applications call for anthropomorphic, multi-fingered manipulation rather than a gripping hand. For those, the hands in our Robot Hands category are a different class of tool.
What is the Inspire EG2-4B used for?
- Collaborative arm end-effector: a light gripping hand for small arms where wrist weight is closely budgeted.
- Mobile manipulation: picking and placing objects on mobile platforms, where low idling current helps the battery.
- Research and grasping studies: experiments that need repeatable, programmable grip force and opening width.
- Education and training: teaching robot programming and serial control in university and vocational laboratories.
- Light assembly and testing: holding small components in test fixtures or simple assembly steps.
- Service and laboratory automation: handling everyday items or sample containers that must not be crushed.
Pricing and Availability
Robots Middle East supplies the Inspire EG2-4B on quotation. Please share the following with our team:
- your application
- the robot or platform you intend to use
- the quantity you require
We will review your application with you and settle integration details such as mounting and control before you commit. Delivery, customs clearance and technical support are arranged together with your quotation. The quotation request for the Inspire EG2-4B Dexterous Robot Hand is available on this page.
Frequently Asked Questions
Which communication interface does the EG2-4B use?
The hand communicates over RS485. Our team discusses control integration with you as part of the quotation.
How much grip force can the EG2-4B apply?
Grip force is adjustable over 0‑15N, with a force repeatability of ±1N.
How heavy is the hand?
The EG2-4B weighs 223g. Its total stroke across both sides is 70mm.
Does the hand release its grip if power is lost?
No. The EG2-4B features power-off self-locking, so it holds its position when the supply is removed. It also offers drop detection for parts that slip while powered.
Is the EG2-4B suitable for outdoor or wet environments?
The protection level is IP40 and the recommended working temperature is 0‑40℃. These figures suit indoor, controlled environments, and we recommend discussing harsher conditions with our team.
What power supply does the hand need?
The EG2-4B operates on DC24V±10%. Its peak current is 0.70A and its idling current is 30mA.
Where can I buy the Inspire EG2-4B and what does it cost?
You can buy the Inspire EG2-4B from Robots Middle East, which supplies it across the Middle East. The cost is provided in a tailored quotation that also covers delivery, customs and support.
Summary
The EG2-4B is built on the idea that a gripping hand should take as little as possible from the arm that carries it while giving back as much control as possible. Its 223g weight leaves capacity for the task, and its 70mm stroke covers a broad range of parts. Force-position dual control, power-off self-locking and drop detection let a light hand hold a part securely and react when something goes wrong. With RS485 control and a DC24V supply, it fits the automation cabinets and research benches where it is most likely to work. For teams across the Middle East planning a light, controllable gripping solution with Robots Middle East, this page is the starting point.