Inspire EG2-4C Dexterous Robot Hand

A compact end effector from Inspire Robots that combines force-position control with self-locking and drop detection, so that robot arms can grasp, hold and carry objects with confidence. Robots Middle East supplies it for automated workstations, laboratories and research platforms across the region.

In stock

BRAND:
INSPIRE ROBOTS
PART #:
EG2-4C
ORIGIN:
China
AVAILABILITY:
SUBJECT TO AVAILABILITY
SKU:
Inspire-EG2-4C

Inspire EG2-4C Dexterous Robot Hand

A gripper spends far more of its working life waiting than gripping: poised above a fixture, holding a part while the arm travels, or simply idle between cycles. The Inspire EG2-4C Dexterous Robot Hand is designed for those quieter moments as carefully as for the grasp itself. In its EG2-4C2 version it draws an idling current of 30mA, locks itself when power is removed and detects when an object has been dropped, while force-position dual control governs the moment of contact. At a weight of 231g, it asks little of the arm that carries it, leaving more of the robot's capacity for the work rather than the tool.

Robots Middle East supplies the EG2-4C to system integrators, research laboratories, universities and manufacturers across the Middle East. Our team prepares each quotation, arranges delivery to your site and remains your point of contact for technical support once the end effector is installed, so that questions about configuration and integration have a regional address rather than a distant one.

Background

Inspire Robots and its family of hands

Inspire Robots builds end effectors that span a wide range of complexity, from multi-fingered dexterous hands intended for humanoid and research platforms to compact grippers intended for routine automation. On our store, the brand's range includes multi-fingered hands such as the Inspire RH56BFX Dexterous Robot Hand (RH56BFX), alongside the EG2 series to which this product belongs. The full selection is gathered under Inspire Robots. Where a multi-fingered hand is chosen for its ability to imitate human grasps, an end effector of the EG2 kind is chosen for repeatable, controlled handling within a defined automated process.

Control built into the end effector

What distinguishes the EG2-4C is the set of control features Inspire Robots places in the device itself: force-position dual control, power-off self-locking and drop detection. The manufacturer designs this combination to adapt to automated operations across many industries. In practical terms, this means the end effector is not merely opened and closed on command; it can be directed to a position, governed by the force it applies, held securely when power disappears, and made to report when the object it was holding is no longer there. Each of these capabilities would otherwise have to be engineered around the gripper by the integrator.

Technical Specifications

SpecificationEG2-4C2
Grip force0–20N
Force repeatability±1N
Weight231g
Operating voltageDC 24V ±10%
Idling current30mA
Unloaded current200mA
Full stroke closing time1.3s
Maximum speed70mm/s
Protection levelIP40
Control featuresForce-position dual control, power-off self-locking, drop detection

Specifications are as published by the manufacturer and are confirmed against the datasheet at quotation. The manufacturer has not published the package contents, the gripping force at the stroke ends, a payload rating, a mounting interface drawing, certifications or details of software and an SDK; Robots Middle East confirms these at quotation.

What do force-position dual control, self-locking and drop detection add to a robot cell?

Consider a typical handling cycle. The arm approaches, the end effector closes, the part is carried and then released. Force-position dual control addresses the first critical moment: the end effector can move to a target position and regulate the force it applies, which on the EG2-4C2 spans 0–20N with a force repeatability of ±1N. That range and repeatability make it a sensible candidate for parts that must be held firmly without being crushed, such as moulded components, sample tubes or light assemblies.

Power-off self-locking addresses the second moment, the one nobody plans for. If the supply is interrupted while a part is in the air, a self-locking end effector keeps its grip instead of releasing. For a cell operator, this reduces the consequences of an emergency stop or a power fault; for a laboratory, it can be the difference between a recoverable pause and a dropped sample.

Drop detection addresses the third: knowing that something has gone wrong. When the end effector reports that an object has been lost, the controller can halt, retry or alert an operator rather than completing a cycle with an empty hand. Taken together, these three features move some of the burden of reliable handling from the integrator's code into the device, which is precisely where many projects lose time.

How should the EG2-4C be weighed against the EG2-4B?

The sources name two versions within this series, the EG2-4C2 and the EG2-4B2, and the closely related Inspire EG2-4B Dexterous Robot Hand (EG2-4B) is available on our store. Every figure in the table above belongs to the EG2-4C2; this page lists figures for that version only, and we do not transfer one version's specification to the other. If you are choosing between them, the sensible approach is to list the parts you need to handle, the force they tolerate and the cycle time your process demands, and to ask Robots Middle East to compare both datasheets against those requirements within a single quotation. That way the decision rests on the datasheet for each version rather than on assumption.

Who is the EG2-4C for?

The EG2-4C suits system integrators building automated workstations where a light, electrically driven end effector with built-in safety behaviour shortens commissioning. Its DC 24V supply matches the voltage common in industrial control cabinets, and its low idling current is welcome on platforms that run from batteries, which makes it relevant to developers of mobile manipulators and collaborative cells where every watt and every gram at the wrist matters.

Research groups and university laboratories form a second audience. A controllable grip force with stated repeatability gives a clean, measurable variable for experiments in grasping, manipulation and learning from demonstration, without the complexity of a multi-fingered hand.

Laboratories and light manufacturers handling delicate items are a third. The IP40 protection level points to clean, dry indoor environments rather than washdown or outdoor use, so buyers with wet or dusty processes should discuss their conditions with us before ordering.

Where a project genuinely needs human-like grasps, finger-level control or tactile feedback, a multi-fingered hand is the better fit; the Robot Hands category presents those alternatives, and our team can advise on the choice.

What is the EG2-4C used for?

  1. Laboratory automation: transferring vials, tubes and consumables between instruments with controlled, repeatable force.
  2. Electronics and light assembly: picking and placing small components that must be held securely but not deformed.
  3. Mobile manipulation: equipping battery-powered mobile robots with a light end effector that draws little current at rest.
  4. Research and education: teaching and studying force-controlled grasping on robot arms in university and institute laboratories.
  5. Quality inspection: presenting parts to cameras or test fixtures and detecting immediately when a part has been lost.
  6. Machine tending: loading and unloading light parts at indoor workstations where a grip held through power loss protects the cycle.

Pricing and Availability

Robots Middle East supplies the EG2-4C on quotation, so that each offer reflects the version, quantity and integration support your project requires. Delivery, customs clearance and technical support are arranged together with your quotation. To begin, please share your application and the robot platform you intend to use, and our team will respond with a tailored offer; the quotation request is available on this page.

Frequently Asked Questions

What grip force does the EG2-4C provide?

The EG2-4C2 version provides a grip force of 0–20N with a force repeatability of ±1N.

What happens if power is lost while an object is held?

The end effector features power-off self-locking, so it retains its grip when power is removed. This helps protect parts and equipment during an emergency stop or supply fault.

What voltage does it require?

The EG2-4C2 operates on DC 24V ±10%, with an idling current of 30mA and an unloaded current of 200mA.

How quickly does it close?

The EG2-4C2 has a full stroke closing time of 1.3s and a maximum speed of 70mm/s.

Is it suitable for wet or dusty environments?

The EG2-4C2 carries an IP40 protection level, which suits clean, dry indoor settings. For harsher conditions, please describe your environment when requesting a quotation so that our team can advise.

How does drop detection help in an automated cycle?

When the end effector detects that an object has been dropped, the controller can stop, retry or alert an operator. This prevents a cycle from continuing with an empty hand.

Where can I buy the Inspire EG2-4C Dexterous Robot Hand and what does it cost?

You can buy it from Robots Middle East, which supplies customers across the Middle East. Pricing is provided on quotation, tailored to your version, quantity and support requirements.

Summary

The value of an end effector is measured not only at the instant it closes but across every moment it waits, carries and occasionally faces the unexpected. The EG2-4C addresses all of those moments: force-position dual control at contact, self-locking when power fails, drop detection when a part is lost, and, in its EG2-4C2 version, a modest weight and idling current for the long stretches in between. For integrators, researchers and laboratories across the Middle East that need controlled handling rather than human-like dexterity, it is a considered choice, and Robots Middle East is ready to quote, deliver and support it. Whether you are specifying a single cell or comparing versions, this page is the starting point.

Specifications

General

BRAND INSPIRE ROBOTS
PART # EG2-4C
ROBOT TYPE HAND

What's included

Inspire EG2-4C Dexterous Robot Hand (EG2-4C)

Product Questions

No questions yet. Be the first to ask.

0/255

Write a Review
You're reviewing: Inspire EG2-4C Dexterous Robot Hand
loader
Loading...

You submitted your review for moderation.