SEER Robotics Robotic Automatic Charging Station (SCS-2002)

In a fleet of moving machines, the piece of hardware that never moves often decides how much the others can achieve. Mobile robots get the attention, but a well-placed dock determines whether they spend the shift working or waiting. The SEER Robotics Robotic Automatic Charging Station (SCS-2002) is that stationary partner. It is a floor-standing charger that SEER Robotics robots can dock with automatically, that an operator can also use by hand, and that adjusts how it supplies power according to what the battery reports back. It is a small part of the system, but it does a great deal to keep the rest of the system running.

Robots Middle East supplies the SCS-2002 to warehouses, factories, hospitals and integrators across the Middle East. Our team prepares each quotation, advises on matching the station to the robots on site, arranges delivery and customs clearance into the destination country, and provides after-sales support for the installation. Robots Middle East also handles enquiries about the wider SEER Robotics range, so a charging station can be specified alongside the robots it will serve.

Background

SEER Robotics and the Robot Brain

SEER Robotics, listed in Hong Kong as 06106.HK, is a platform-based embodied intelligent robotics company built around the Robot Brain, its core control platform. The company serves more than 2,500 customers worldwide with intelligent robotics solutions. That platform approach matters for a charging station. A dock built by the company that also builds the robot's controller is designed as part of the same system rather than as a third-party accessory, which is why the SCS-2002 provides automatic charging with robots from SEER Robotics.

Charging that listens to the battery

The defining technology of the SCS-2002 is intelligent charging. The station automatically adjusts its power supply strategy according to feedback from the battery. A fixed-output charger treats every battery the same way. A charger that responds to battery feedback can match its behaviour to the condition of the pack it is connected to. The station is matched to the New AMB with its lithium iron phosphate battery, a chemistry widely used in industrial mobile robots because it holds up well under the repeated cycling of fleet work. The unit has a new industrial design, a housing intended for life on a working floor rather than in a laboratory.

Technical Specifications

Specifications are as published by the manufacturer and are confirmed against the datasheet at quotation.

The manufacturer has not published the operating temperature, the humidity range, network connectivity, the charging time, certifications or the contents of the box; Robots Middle East confirms these at quotation.

How do automatic and manual charging work together on the SCS-2002?

Most of the time, the station is meant to be invisible. A SEER Robotics robot reaches the station, docks and charges without anyone touching a cable. This is the mode that makes round-the-clock operation realistic, because charging becomes another task the fleet schedules for itself rather than a job for a member of staff.

Operations do not always run to schedule, however. A robot may come back from maintenance with a depleted battery, a vehicle may need to be charged away from its normal docking position, or a commissioning engineer may want direct control during set-up. For these situations the SCS-2002 supports manual charging through its LP24-4P connector. Having both modes in one unit means a site does not need a separate bench charger for exceptions. The same station, with the same intelligent charging behaviour, serves both the routine and the unusual.

Because the station adjusts its power supply strategy in response to battery feedback in either case, the operator does not need to think about charging profiles. The decision sits with the station and the battery, which is where it belongs in a fleet run by software.

Which robots is the SCS-2002 designed to charge?

The suitable product model for the SCS-2002 is the New AMB, with its lithium iron phosphate battery, and the station provides automatic charging with robots from SEER Robotics. The maximum output voltage of 54.75±0.2 V belongs to this pairing. Buyers should treat compatibility as specific rather than general. The station is a matched component of the SEER Robotics platform, not a universal charger for any mobile robot.

For fleets that include other SEER Robotics models, or for projects where the robot specification is still being finalised, the Robots Middle East team can advise on the right match. SEER Robotics offers several other charging stations, listed in our Charging Stations category, and the right choice depends on the robot and battery in question.

Who is the SEER Robotics Robotic Automatic Charging Station (SCS-2002) for?

The first group is operators already running, or planning to run, New AMB robots from SEER Robotics. For them, the SCS-2002 is the station named for their robot and its lithium iron phosphate battery. It is the most direct route to automatic charging.

The second group is system integrators who build intralogistics and production solutions on the SEER Robotics platform. When an integrator designs a cell or a warehouse layout, the charging points are part of the floor plan. Knowing the station's footprint of 466 x 417 x 299 mm allows docking positions to be planned early, away from traffic lanes and close to the routes robots already travel.

The third group is facility and maintenance managers who want fewer manual interventions. Automatic docking removes the routine plug-in task, while the LP24-4P manual connector keeps a controlled fallback for service work.

Buyers whose fleets use a different SEER Robotics robot or battery should compare the SCS-2002 with other stations in the range, such as the SEER Robotics Robotic Automatic Charging Station (SCS-2502) or the SEER Robotics Robotic Automatic Charging Station (SCS-C4860). Our team is glad to advise which model suits a given robot. Those equipping complete production lines may also find the robots themselves in our Factory Robots category.

What is the SEER Robotics Robotic Automatic Charging Station (SCS-2002) used for?

1. Warehouse fleet charging: giving New AMB robots a fixed point where they recharge between picking and transport tasks.
2. Production line logistics: keeping robots that move materials between workstations charged without stopping the line.
3. Multi-shift operation: letting robots manage their own charging overnight and between shifts, without staff on hand to plug them in.
4. Maintenance and recovery: charging a robot by hand through the LP24-4P connector after servicing or an unplanned stop.
5. Commissioning new sites: giving integrators a dedicated charging point during set-up and testing of a SEER Robotics deployment.
6. Battery care in daily use: applying intelligent charging that responds to battery feedback, so that routine charging is suited to each pack's condition.

Pricing and Availability

The SCS-2002 is supplied on quotation, so that every order is prepared for the robots and site it is intended for. Please send Robots Middle East the robot models in your fleet, the number of charging points you need and the country of installation. Delivery, customs and support are arranged together with the quotation. To begin, use the quotation request available on this page.

Frequently Asked Questions

Can the SCS-2002 charge robots without an operator?

Yes. The station is designed for automatic charging with robots from SEER Robotics, so a compatible robot can dock and charge without anyone connecting a cable.

Can I charge a robot manually with this station?

Yes. The SCS-2002 supports manual charging, and the manual charging connector is the LP24-4P.

Which robot is the SCS-2002 suited to?

The suitable product model is the New AMB with a lithium iron phosphate battery. Other SEER Robotics charging stations serve other robots in the range.

What does intelligent charging mean on this station?

The station automatically adjusts its power supply strategy according to feedback from the battery, rather than delivering a single fixed charge profile.

How much floor space does the station need?

The station measures 466 x 417 x 299 mm (L x W x H). Clearance around the docking position depends on your site layout and the robot's approach path.

Does the station work with both 50 Hz and 60 Hz supplies?

Yes. The input frequency of the SCS-2002 is 50 / 60 Hz.

Where can I buy the SEER Robotics Robotic Automatic Charging Station (SCS-2002) and what does it cost?

You can buy the SCS-2002 from Robots Middle East, which supplies it across the Middle East. The cost is set in a quotation prepared for your order, and you can request one on this page.

Summary

The SCS-2002 is the part of a SEER Robotics installation that stays put so that everything else can keep moving. It provides automatic docking for SEER Robotics robots, a manual LP24-4P connection for exceptions, and intelligent charging that responds to battery feedback, all in a housing of 466 x 417 x 299 mm matched to the New AMB and its lithium iron phosphate battery. Robots Middle East supplies, delivers and supports it across the region. For any fleet that should not depend on a person with a cable, this page is the starting point.