SEER Robotics Robotic Automatic Charging Station (SCS-2502)

Every mobile robot on a site moves, except for one piece of its equipment: the charging point it returns to. That fixed spot on the floor quietly decides how much work the moving machines can deliver, because a robot that cannot recharge reliably is a robot that stops. The SEER Robotics Robotic Automatic Charging Station (SCS-2502) is that fixed point for SEER robots of the SJV series. It lets them dock and recharge without a person stepping in, adjusts its power supply strategy according to what the battery reports, and still accepts a manual connection when an engineer prefers to charge by hand.

Robots Middle East sells the SCS-2502 and supplies it to customers across the Middle East, from distribution centres and manufacturing plants to research facilities and system integrators. Robots Middle East prepares the quotation, arranges delivery to your site and remains your point of contact for support once the station is in service, so that the charging side of your fleet is handled by the same team that understands the robots it serves.

Background

SEER Robotics and the Robot Brain

SEER Robotics, listed in Hong Kong as 06106.HK, describes itself as a platform-based embodied intelligent robotics company built around what it calls the Robot Brain. It serves more than 2,500 customers worldwide with intelligent robotics solutions. That platform approach matters when choosing infrastructure such as charging stations: rather than treating the charger as a generic power supply, SEER designs it as part of an ecosystem in which robots, controllers and supporting equipment are intended to work together. For a buyer, this means the charging station is selected in the context of the fleet, not in isolation.

A station designed around the SJV series

The SCS-2502 is designed for the SJV series (new, 25 A). Its automatic charging function is based on robots from SEER Robotics, meaning that the docking and charging sequence is designed to run with SEER machines. Alongside that, the station supports manual charging through an LP24-4P connector, which gives maintenance teams a direct route to replenish a battery when automatic docking is not wanted. The unit carries SEER's new industrial design, and its intelligent charging logic automatically adjusts the power supply strategy according to battery feedback, so the charge delivered responds to the condition the battery reports rather than following a single fixed routine.

Technical Specifications

Specifications are as published by the manufacturer and are confirmed against the datasheet at quotation.

The manufacturer has not published the operating temperature range, the charging efficiency, the communication interface, the contents of the box, the certifications or the mounting method; each of these is confirmed with you at quotation.

How does the SCS-2502 decide how to charge a battery?

A conventional charger applies the same routine to every battery it meets. The SCS-2502 takes a different approach: it reads the feedback provided by the battery and adjusts its power supply strategy accordingly. In practical terms, the station is not working blind. It responds to what the battery tells it, which is the behaviour a fleet operator generally wants from equipment that will run unattended, often through the night or between shifts.

This matters most when charging becomes routine rather than occasional. Once robots dock on their own, nobody is standing beside the station watching a gauge. The intelligence therefore has to sit in the charging logic itself. Combined with automatic charging for SEER robots, battery-responsive control is what allows the station to be treated as part of the operating rhythm of the site instead of a task on someone's checklist.

The manual route complements this. With the LP24-4P connector, a technician can charge a robot directly, for instance during commissioning, after maintenance or whenever a robot has been taken out of its normal route. The automatic and manual functions do not compete; they cover the two situations every fleet encounters: normal operation and the exceptions to it.

Does the SCS-2502 work with robots outside the SJV series?

The SCS-2502 is built for the SJV series (new, 25 A), and its automatic charging is based on robots from SEER Robotics. If your fleet includes other SEER models, or robots from more than one generation, the sensible course is to share the robot models with us when requesting a quotation, so that the correct station can be matched to each machine.

SEER offers several charging stations, and the wider range can be compared in our Charging Stations category, including the SEER Robotics Robotic Automatic Charging Station (SCS-2002) and the SEER Robotics Robotic Automatic Charging Station (SCS-C4860). Which of them suits a particular robot depends on the robot model in question.

Who is SEER Robotics Robotic Automatic Charging Station (SCS-2502) for?

The first and most obvious buyer is the operator already running, or about to deploy, SEER robots of the SJV series. For that customer, the SCS-2502 is the station designed for the fleet, and the decision is chiefly about how many units are needed and where they should stand on the site.

The second group is the system integrator. Integrators who design automated material flows for warehouses and factories need charging infrastructure that fits into the layout and the operating schedule they are planning. A station that supports both automatic docking and manual charging gives them flexibility during commissioning and in the handover to the client's own team.

A third group is facilities and maintenance management. Teams responsible for keeping robots available value equipment that reduces routine manual intervention while still allowing a direct connection when a robot needs attention. Research groups and pilot projects testing SEER robots in a controlled environment fall into a similar category, where manual charging is often useful during trials.

Buyers whose robots are not in the SJV series should look at the other stations in the Charging Stations category, and those planning a broader automation project may also find the Factory Robots range relevant. In every case, Robots Middle East matches robot and station before the order is placed.

What is SEER Robotics Robotic Automatic Charging Station (SCS-2502) used for?

1. Warehouse logistics: giving SEER mobile robots a fixed point to recharge between transport tasks.
2. Factory intralogistics: keeping robots that move materials between production stations supplied with energy.
3. Multi-shift operation: letting robots recharge on their own during quieter periods so they are ready for the next shift.
4. Commissioning and testing: using the manual charging connection while routes and docking positions are being set up.
5. Maintenance work: charging a robot by hand after servicing or when it has been taken out of its normal route.
6. Fleet expansion: adding charging capacity as more SJV series robots are introduced on a site.

Pricing and Availability

The SCS-2502 is supplied on a quotation basis, as the right configuration depends on the robots in your fleet, the number of charging points you require and the layout of your site. Please send us your robot models, the quantity of stations and your delivery location, and we will prepare a formal offer. Delivery, customs clearance and after-sales support are arranged together with the quotation. Requesting a quotation for the SEER Robotics Robotic Automatic Charging Station (SCS-2502) from Robots Middle East is straightforward, and the request form is available on this page.

Frequently Asked Questions

Which robots is the SCS-2502 intended for?

The SCS-2502 is designed for the SJV series (new, 25 A). Its automatic charging is based on robots from SEER Robotics.

Can a robot be charged manually at the SCS-2502?

Yes. The station supports manual charging, and the connector for manual charging is the LP24-4P.

What does intelligent charging mean on this station?

The station automatically adjusts its power supply strategy according to the feedback it receives from the battery. The charge therefore responds to the battery's reported condition.

What are the dimensions of the SCS-2502?

The station measures 480 x 368.5 x 298.5 mm (L x W x H). This helps when planning the space it will occupy on the site floor.

What input frequency does the station accept?

The station accepts an input frequency of 50 / 60 Hz, and its maximum output voltage is 54.6±0.2 V.

Is the SCS-2502 part of a wider range of SEER charging stations?

Yes. SEER Robotics offers several automatic charging stations, which can be compared in our Charging Stations category to find the one that matches each robot model.

Where can I buy the SEER Robotics Robotic Automatic Charging Station (SCS-2502) and what does it cost?

You can buy it from Robots Middle East, which supplies it across the Middle East. The cost depends on quantity and project requirements, so please request a quotation on this page.

Summary

In a robot fleet, the charging station is the piece that stays put while everything else moves, and it sets the limit on how long the moving machines can keep working. The SCS-2502 is designed to make that fixed point dependable for SEER robots of the SJV series: it lets them charge automatically, adapts its power supply strategy to battery feedback, and keeps a manual LP24-4P connection available for commissioning and maintenance. Its dimensions and electrical figures help with planning, and every remaining detail is settled with you before any order. Robots Middle East quotes, delivers and supports the station across the region, and for anyone ready to give their SEER fleet a reliable place to recharge, this page is the starting point.