SIASUN Industrial Robot Arm (SP180A-180/3.15)

A dedicated palletising robot from SIASUN, built to take over the heavy, repetitive work of stacking goods at the end of the line. Robots Middle East supplies it to food, building materials and logistics operations that need dependable end-of-line automation.

In stock

BRAND:
SIASUN
PART #:
SP180A-180/3.15
ORIGIN:
China
AVAILABILITY:
FOR OPPORTUNITIES OVER 1 MILLION USD
SKU:
SIASUN-SP180A-180/3.15

SIASUN Industrial Robot Arm (SP180A-180/3.15)

Picture the far corner of a pallet with the stack already near its final height: that is the point a palletising robot must still reach, at full load, cycle after cycle, without slowing the line behind it. The SIASUN Industrial Robot Arm (SP180A-180/3.15) answers that test with a generous arm span and a full-load rhythm set for high-volume work, while a deliberately simple mechanical layout keeps it running through long shifts. It is a dedicated palletising robot rather than a general-purpose arm adapted to the task, and it shows in almost every design decision.

Robots Middle East supplies the SP180A-180/3.15 to manufacturers, packers and logistics operators across the Middle East. Robots Middle East prepares the quotation, arranges delivery to your site and provides support for the robot once it is in service, so a single partner handles the project from enquiry to commissioning.

Background

SIASUN and its robotics lineage

SIASUN is a Chinese robotics and automation company with roots in the Chinese Academy of Sciences' Shenyang Institute of Automation. Its portfolio spans industrial robot arms, mobile robots for assembly and heavy logistics, and complete automation systems for factories. That breadth matters to a buyer: an arm from SIASUN sits within a family of products built by the same engineering organisation, from compact articulated arms to heavy-duty mobile platforms, all of which can be found in our Factory Robots range.

A robot built for one job

The SP180A-180/3.15 is described by its manufacturer as a high-performance dedicated palletising robot. That word "dedicated" is the key to its positioning. Rather than offering the dexterity needed for welding seams or assembling small parts, it concentrates on the motions a palletising cell actually demands: picking a load at the end of a conveyor, carrying it across a wide envelope and setting it down accurately on a growing stack. SIASUN pairs this with a lightweight, compact structure that supports fast and precise handling and stacking, and with a palletising-specific software package supplied as standard, so the robot arrives prepared for its intended task rather than as a blank arm awaiting extensive programming.

Technical Specifications

SpecificationValue
Product typeHigh-performance dedicated palletising robot
Arm reach3.15 m
Cycle rate at full load1300 cycles/hour
Balance cylinderNone (design without balance cylinder)
StructureLightweight design, compact structure
SoftwarePalletising software package as standard
Target industriesFood, building materials and similar sectors

Specifications are as published by the manufacturer and are confirmed against the datasheet at quotation.

The weight, rated payload, number of axes, power supply, controller model, motion range and maximum speed of each axis, operating temperature, mounting dimensions and box contents have not been published, and Robots Middle East confirms each of them at quotation.

What makes a palletising robot without a balance cylinder different?

Many large articulated robots use a balance cylinder to counteract the weight of the arm as it lifts and extends. It is a sensible piece of engineering, but it is also an additional component, with its own seals, pressures and wear, and therefore an additional point at which something can go wrong. SIASUN has designed the SP180A-180/3.15 without one, with the stated aim of lowering the probability of faults.

For a palletising cell, that choice carries real weight. The robot sits at the end of the line, where every product the plant makes must pass. If it stops, conveyors back up, upstream machines pause and finished goods accumulate with nowhere to go. A design that removes a component from the arm removes one source of such stoppages and simplifies the list of parts a maintenance team has to inspect. Combined with the lightweight, compact structure, the result is a robot whose mechanical layout is aimed squarely at continuous, repetitive duty.

How does the palletising software package help?

Programming a palletising pattern by hand, position by position, is slow and invites mistakes, particularly when a plant runs several product sizes and stacking layouts. The SP180A-180/3.15 comes with a palletising-specific software package as standard, which SIASUN presents as making programming convenient and improving the customer experience. In practical terms, software of this kind lets an integrator or plant engineer define the pallet, the product and the layer pattern, and lets the robot work out the stacking sequence, rather than teaching each placement individually.

That matters most when product changeovers are frequent. A food producer switching between carton sizes, or a building materials plant moving from one bag format to another, needs to change stacking patterns quickly and with confidence. Software designed around palletising shortens that transition and makes the cell easier to hand over to the people who run it day to day.

Who is the SIASUN Industrial Robot Arm (SP180A-180/3.15) for?

The first group is food and beverage producers who close their lines with cases, cartons or shrink-wrapped packs and need a steady, high full-load rhythm at the point of palletising. SIASUN names the food sector specifically among the robot's target industries, and the region's large food processing and bottling plants are a natural fit.

The second group is building materials manufacturers. Cement, mortar, gypsum and similar products are heavy, dusty and relentless to stack by hand, and the construction activity across the Gulf keeps such plants running long hours. A dedicated palletising robot with a wide arm span takes the most physically demanding task off the plant floor.

The third group is logistics and distribution operators, along with system integrators building end-of-line cells for any of the above. For them, the standard software package and the simplified mechanical design reduce the engineering effort per project.

Buyers whose cells are smaller, or whose loads are lighter, may find a better match in the SIASUN Industrial Palletizing Robot Arm (SP120A-120/2.50), a smaller palletising model in the same family. Those looking for an arm for general handling or assembly rather than palletising can browse our Robot Arms category, and Robots Middle East can advise which model suits the application.

What is the SIASUN Industrial Robot Arm (SP180A-180/3.15) used for?

  1. Palletising bagged building materials — stacking sacks of cement, mortar or similar products at the end of a filling line.
  2. Palletising food cartons and cases — building stable pallets of packaged food at the close of a packing line.
  3. Beverage end-of-line handling — placing shrink-wrapped packs or trays onto pallets in bottling and canning plants.
  4. Mixed-pattern stacking — switching between layer patterns for different product formats using the palletising software.
  5. Distribution centre palletising — consolidating outbound goods onto pallets ahead of dispatch.
  6. Replacing manual stacking — taking repetitive, heavy lifting away from workers in high-volume plants.

Pricing and Availability

The cost of a palletising project depends on far more than the robot itself: the end-of-arm tooling, the conveyor interface, the safety guarding and the stacking patterns all shape the final scope. For that reason Robots Middle East quotes each SP180A-180/3.15 project individually, based on your products, your line layout and your output targets. Delivery, customs clearance and after-sales support are arranged together with the quotation. To begin, send us the details of your line using the quotation request available on this page.

Frequently Asked Questions

What kind of robot is the SP180A-180/3.15?

It is a high-performance dedicated palletising robot from SIASUN, designed for stacking products onto pallets at the end of production and packing lines.

How far can the SP180A-180/3.15 reach?

SIASUN publishes an arm reach of 3.15 m for this model, giving it a wide working envelope around a palletising cell.

How many cycles can it complete per hour?

The manufacturer states a cycle rate of 1300 cycles/hour at full load.

Why does it have no balance cylinder?

SIASUN designed the robot without a balance cylinder to lower the probability of faults, which removes one component that would otherwise need inspection and maintenance.

Does it come with palletising software?

Yes, a palletising-specific software package is supplied as standard, making stacking patterns easier to program.

What is the rated payload of the SP180A-180/3.15?

The rated payload is not given in the published material we hold, so Robots Middle East confirms it against the manufacturer's datasheet at quotation.

Where can I buy the SIASUN Industrial Robot Arm (SP180A-180/3.15) and what does it cost?

You can buy it from Robots Middle East, which supplies the robot across the Middle East. Pricing depends on the scope of your palletising project, so please request a quotation and we will prepare one for your line.

Summary

The test set out at the start, reaching the far corner of a tall stack at full load without holding up the line, is exactly what the SIASUN Industrial Robot Arm (SP180A-180/3.15) is designed to pass. Its 3.15 m arm reach covers a wide envelope, its 1300 cycles/hour at full load keep pace with high-volume production, and its design without a balance cylinder strips out a common source of faults. A lightweight, compact structure and a palletising software package supplied as standard complete a robot built for one demanding job in food, building materials and similar industries. If your end-of-line stacking is ready for automation, this page is the starting point.

Specifications

General

BRAND SIASUN
PART # SP180A-180/3.15
ROBOT USE INDUSTRIAL

What's included

SIASUN Industrial Robot Arm (SP180A-180/3.15) SIASUN Industrial Robot Arm (SP180A-180/3.15)

Product Questions

No questions yet. Be the first to ask.

0/255

Write a Review
You're reviewing: SIASUN Industrial Robot Arm (SP180A-180/3.15)
loader
Loading...

You submitted your review for moderation.