SIASUN Industrial Robot Arm (SR25A-25/1.80)

A SIASUN industrial robot arm rebuilt around its wrist, with a hollow, stiff body that stands on the floor or hangs from the ceiling for welding, finishing and handling cells where space is tight. Robots Middle East supplies it to manufacturers and integrators throughout the region.

In stock

BRAND:
SIASUN
PART #:
SR25A-25/1.80
ORIGIN:
China
AVAILABILITY:
FOR OPPORTUNITIES OVER 1 MILLION USD
SKU:
SIASUN-SR25A-25/1.80

SIASUN Industrial Robot Arm (SR25A-25/1.80)

In most robot cells the shoulder and elbow attract the attention, yet it is the wrist that decides whether a weld seam is followed cleanly or a polishing pad holds its angle around a curved casting. The SIASUN Industrial Robot Arm (SR25A-25/1.80) is built on that observation. It is the upgraded iteration of SIASUN's 20 kg-class robot, and the change that defines it is a redesigned fourth-to-sixth axis structure. The outcome is an arm that carries 25 kg, reaches 1803mm and repeats to ±0.05mm, with a wrist sealed to IP65 and final axes that swing through ±180°.

Robots Middle East sells the SR25A-25/1.80 and supplies it to manufacturers, system integrators and technical institutions across the Middle East. Our team prepares each quotation around the buyer's application, coordinates delivery to site and remains the point of contact for technical support once the robot is in production.

Background

SIASUN and its industrial robot line

SIASUN is one of the pioneers of industrial robot development in China. Its industrial robot portfolio is broad, with models covering payload capacities from 4kg to 500kg, so a production engineer can move between payload classes without leaving the same manufacturer's ecosystem. That breadth matters to plants that run several cells side by side: training, spare parts planning and maintenance routines become easier to standardise when the robots share a common lineage.

The SR25A family sits within that portfolio as a group of named versions, among them the SR25A-12/2.01, the SR25A-25/1.80 and the SR25A-35/1.80. Each version carries its own figures, and the model code itself signals the configuration. The version described on this page is the SR25A-25/1.80.

A redesigned wrist for a wider range of work

SIASUN's aim with this model was to adapt the robot to a broader range of application scenarios and industries, and the means it chose was a rework of the fourth, fifth and sixth axes. These are the axes that orient the tool rather than move it across the cell, so changes here show up directly in how well the robot can present a torch, a cutter, a gripper or an abrasive head to the workpiece.

Two further design choices support that goal. The arm is hollow, with cables routed internally, which keeps loose cabling away from fixtures and tooling and adds to the structural stiffness and safety of the arm. The body is produced by a special casting process using an aluminium alloy of automotive engine grade. The robot's dynamic performance allows it to keep high-precision operation even at high cycle speeds, which is the property that lets a fast cell stay an accurate one.

Technical Specifications

SpecificationValue
Payload25 kg (55.1 lbs)
Reach1803mm
Repeatability±0.05mm
Protection (wrist)IP65
J5/J6 motion range±180°

Specifications are as published by the manufacturer and are confirmed against the datasheet at quotation.

The manufacturer has not published the robot's weight, power supply, controller model, axis speeds, operating temperature, mounting dimensions, wrist moment limits or the contents of the delivery; Robots Middle East confirms each of these at quotation.

What changed from the 20 kg-class SIASUN robot?

The SR25A-25/1.80 is not a new platform built from a blank page; it is an upgrade of an established 20 kg-class product. The decisive difference lies in the wrist. By redesigning the structure from the fourth to the sixth axis, SIASUN set out to make the robot suitable for more kinds of work and more industries than its predecessor served.

The practical evidence of that redesign is visible in the specification. The J5 and J6 axes each offer a motion range of ±180°, which gives the tool generous freedom to rotate and tilt without the arm having to reposition its larger axes. The wrist is protected to IP65, an important consideration in processes that generate dust, spatter or coolant mist. Combined with a 25 kg payload, this gives the model room for heavier end-effectors than a 20 kg-class arm would accept, while the reach of 1803mm covers conveyors, fixtures and adjacent stations from a single mounting point.

A further refinement concerns maintenance. Every joint carries its own zero-position calibration groove, and with a dedicated tool a technician can bring each joint back to a precise zero position. After a motor change, a collision or a major service, restoring the robot's reference becomes a defined procedure rather than a lengthy exercise in trial and adjustment.

Why does a hollow arm matter in a welding or polishing cell?

External cable packs are one of the quieter causes of downtime in robotic cells. They snag on fixtures, wear against the arm during repeated motions and restrict how freely the wrist may rotate. In the SR25A-25/1.80 the arm is hollow and the cables run inside it. This arrangement minimises interference and at the same time enhances the structural stiffness and safety of the arm.

For process work the benefit is twofold. First, the robot can approach the workpiece at awkward angles without a trailing harness striking the part or the jig, which is valuable when a weld path turns a corner or a polishing head follows a contoured surface. Second, a stiffer arm holds its path more faithfully under load and at speed, which is precisely what repeatability of ±0.05mm depends on in daily operation.

Mounting flexibility completes the picture. The robot can be floor-mounted or ceiling-hung, which makes it well suited to tasks with small turning radii and to confined spaces. Hanging the arm from above frees floor space for conveyors and operators, and can open better access to the top and sides of a part than a floor installation would allow.

Who is the SIASUN Industrial Robot Arm (SR25A-25/1.80) for?

The model suits manufacturers whose processes demand both a meaningful payload and close control of tool orientation. Automotive component suppliers and metal fabricators running welding or cutting lines form a natural audience, as do foundries and machining shops that finish castings through grinding and polishing. Plants that load and unload machine tools, or move parts between stations, will find the reach and the ceiling-mounting option useful when floor space is already committed.

System integrators are a second important group. The hollow arm, the sealed wrist and the per-joint calibration grooves simplify the tasks integrators repeat on every project: routing services to the tool, protecting the robot in a dirty process and restoring calibration after commissioning or service. Technical colleges and training centres that wish to teach on an industrial-grade arm rather than an educational model may also consider it.

Where the application calls for a different balance of payload and reach, the same family offers alternatives. Buyers should compare the SIASUN Industrial Robot Arm (SR25A-12/2.01) and the SR25A-35/1.80 against the task, as each version carries its own figures. Those evaluating a wider selection can browse the Small Payload category or the full range of Robot Arms, and Robots Middle East will gladly advise on which version fits a given cell.

What is the SIASUN Industrial Robot Arm (SR25A-25/1.80) used for?

  1. Welding – guiding a torch along seams where wide wrist rotation keeps the angle consistent around corners.
  2. Cutting – presenting a cutting tool to parts in a stiff, repeatable path for clean, consistent edges.
  3. Handling – moving parts and assemblies between conveyors, fixtures and stations within the working envelope.
  4. Assembly – placing and joining components where precise, repeated positioning determines product quality.
  5. Grinding and Polishing – holding abrasive tools against contoured surfaces, with the wrist protected against dust and debris.
  6. Loading and Unloading – tending machine tools and presses, floor-mounted or ceiling-hung to save space beside the machine.

Pricing and Availability

Robots Middle East supplies the SR25A-25/1.80 on a quotation basis, so that each offer reflects the exact configuration, tooling and integration the project requires. Please share your application, mounting arrangement and site location with our team, and we will prepare an offer built around them. Delivery, customs clearance and technical support are arranged together with the quotation. To begin, simply use the quotation request available on this page.

Frequently Asked Questions

What payload does the SR25A-25/1.80 carry?

The SR25A-25/1.80 is rated for a payload of 25 kg (55.1 lbs). Tooling weight should be included when assessing whether a given end-effector and workpiece fit within that figure.

How far does the robot reach?

The reach is 1803mm. This allows a single robot to serve several fixtures or stations from one mounting point.

Can the robot be mounted on the ceiling?

Yes. The SR25A-25/1.80 can be floor-mounted or ceiling-hung, which makes it well suited to confined spaces and tasks with small turning radii.

Is the robot suitable for dusty or wet processes?

The wrist is protected to IP65. That protection matters in processes such as grinding, polishing and welding, where dust and spatter reach the tool end of the arm.

How is calibration restored after maintenance?

Each joint has its own zero-position calibration groove. Using a dedicated tool, a technician can align every joint precisely to its zero position.

What is the arm made of?

The body is produced by a special casting process using automotive engine-grade aluminium alloy. The arm is hollow, with cables routed internally for added stiffness and safety.

Where can I buy the SIASUN Industrial Robot Arm (SR25A-25/1.80) and what does it cost?

You can buy it from Robots Middle East, which supplies the robot across the Middle East. The cost depends on configuration and project scope, so please request a quotation and our team will prepare a tailored offer.

Summary

The SIASUN Industrial Robot Arm (SR25A-25/1.80) takes a proven 20 kg-class design and rethinks the part of the robot that meets the work: the wrist. A redesigned fourth-to-sixth axis structure, ±180° travel on J5 and J6 and an IP65 wrist give the tool freedom and protection, while the hollow, stiff arm, the engine-grade cast aluminium body and per-joint calibration grooves support accuracy and maintainability. With a 25 kg payload, 1803mm reach and ±0.05mm repeatability, and the option to stand on the floor or hang from the ceiling, it is a versatile choice for welding, cutting, handling, assembly, finishing and machine tending. For buyers in the Middle East who wish to discuss configuration and receive a quotation from Robots Middle East, this page is the starting point.

Specifications

General

BRAND SIASUN
PART # SR25A-25/1.80
ROBOT USE INDUSTRIAL

What's included

SIASUN Industrial Robot Arm (SR25A-25/1.80) SIASUN Industrial Robot Arm (SR25A-25/1.80)

Product Questions

No questions yet. Be the first to ask.

0/255

Write a Review
You're reviewing: SIASUN Industrial Robot Arm (SR25A-25/1.80)
loader
Loading...

You submitted your review for moderation.