Unitree H2-D Ultimate B Humanoid Robot

A good workshop keeps its tools on the wall, not in the hands of the worker, so the same pair of hands can pick up a spanner in the morning and a fine screwdriver in the afternoon. Unitree's H2-D line follows the same idea. The Unitree H2-D Ultimate B Humanoid Robot belongs to a dual-arm family whose arms can end in a 2-finger gripper, a 3-finger dexterous hand or a 5-finger dexterous hand. One body can therefore be prepared for heavy component handling, careful manipulation or research into human-like grasping. Choosing the end of the arm is as much a part of the purchase as choosing the robot itself.

Robots Middle East sells the Unitree H2-D Ultimate B Humanoid Robot and supplies it to industrial, commercial, academic and research customers across the Middle East. Robots Middle East prepares each quotation for the exact configuration requested, arranges delivery to the customer's site and remains the point of contact for support once the robot is in service.

Background

Unitree Robotics and the H2 Series

Unitree Robotics is known internationally for legged and humanoid robots that have moved robotics from the laboratory into teaching, research and commercial pilots. The H2 Series Dual-Arm Humanoid Robot extends that work into structured manipulation. Unitree divides the series into two product lines, H2-D and H2-A, designed to support diverse deployment configurations for industrial operations, commercial services, research and development, and embodied intelligence training. The H2-D line, to which this product belongs, is the one built around a lifting and pitching torso with two working arms.

Configurations Within the H2-D Line

Unitree names an H2-D Standard and an H2-D Flagship and gives some figures for each separately. The Standard has a direct power supply for continuous 7*24H operation and a 48V/18Ah (864Wh) quick-release base battery; the Flagship carries a 48V/30Ah (1.44 kWh) quick-release base battery, a dual-wheel differential drive and a top speed of up to 1.5 m/s. The Ultimate B designation is a store configuration within the H2-D Ultimate group. The table below therefore keeps every figure with the version it belongs to, and Robots Middle East confirms the trim and the fitted hand in writing when the quotation is issued.

Technical Specifications

Specifications as published by the manufacturer; confirmed against the datasheet at quotation.

The manufacturer has not published which trim the Ultimate B corresponds to, which hand the Ultimate B configuration is fitted with, the IP rating, the camera resolution or the charger and in-box contents list; these are confirmed at quotation.

Which hand should the Unitree H2-D Ultimate B Humanoid Robot be fitted with?

The answer depends on what the robot will hold most of the day. A 2-finger gripper is the natural choice for repetitive grasping of rigid parts, cartons and fixtures, where reliability and simple programming matter more than finesse. The arms support a rated payload of up to 7 kg each, enabling efficient handling and assembly of heavy industrial components, and a parallel gripper keeps that work straightforward to set up.

A 3-finger dexterous hand widens the range of shapes the robot can secure, which helps where parts vary in geometry or must be reoriented before placement. A 5-finger dexterous hand is the option for teams whose real interest is human-like manipulation itself: teleoperation studies, imitation learning and embodied intelligence training, where data collected from an anthropomorphic hand transfers more naturally to human demonstrations. Robots Middle East confirms the fitted end effector with you before any commitment is made, so the hand matches the work from the first day.

What separates the H2-D Flagship from the H2-D Standard?

The two H2-D trims answer different questions about where the robot works. The H2-D Standard runs from a direct power supply rated for 7*24H operation, which suits a fixed station such as an assembly cell, an inspection bench or a demonstration counter that never needs to move. It also carries a 48V/18Ah (864Wh) quick-release base battery.

The H2-D Flagship is a mobile platform: servo motors, a dual-wheel differential drive supporting 360° in-place rotation, a turning diameter of ~0.75 m and a speed of up to 1.5 m/s. Its 48V/30Ah (1.44 kWh) quick-release base battery gives approximately 5h of operation, with replaceable batteries and auto charging. Both trims share the 0-115° waist pitch range, which lets the torso bend from floor-level picking to overhead handling. Buyers who need the robot to travel between stations should therefore ask which trim underlies the Ultimate B configuration, as that determines whether it moves on its own wheels or works from a fixed position.

Who is the Unitree H2-D Ultimate B Humanoid Robot for?

Manufacturers and integrators exploring humanoid handling are a natural audience. The combination of two arms, a lifting torso with 0.46m/0.36m of vertical travel and a choice of grippers gives them a platform for trials in assembly, kitting and machine tending, while the SDKs, APIs and navigation software stack let developers focus on application innovation and reduce development cycles from months to weeks.

Universities and research institutes form a second segment. Their interest usually lies in manipulation research, human-robot interaction and embodied intelligence, where the dexterous hand options and the choice of high-performance computing module, including models such as Thor, matter as much as payload. Commercial operators in hospitality, retail and public venues make up a third group, drawn by the microphone array and high-power speaker for natural voice interaction.

Buyers still deciding between configurations can compare the full H2-D Ultimate range, including the Unitree H2-D Ultimate A Humanoid Robot and the Unitree H2-D Ultimate C Humanoid Robot, or review the wider Unitree H2-D family, which also lists the Unitree H2-D Standard D Humanoid Robot. Robots Middle East can set out the differences between these packages for a specific application.

What is the Unitree H2-D Ultimate B Humanoid Robot used for?

1. Component assembly: handling and fitting industrial parts within the rated payload of each arm.
2. Floor-to-overhead handling: using the pitching waist and vertical lift to pick from low bins and place on high shelves.
3. Machine tending: loading and unloading fixtures at a fixed workstation with a gripper suited to the parts.
4. Commercial service: greeting, guiding and answering visitors through voice interaction in public-facing spaces.
5. Research and development: building and testing manipulation, navigation and interaction software through the SDKs and APIs.
6. Embodied intelligence training: collecting demonstration and teleoperation data for learning-based control with dexterous hands.

Pricing and Availability

The cost of this robot depends on the confirmed trim, the end effector, the computing module and the software support requested, so Robots Middle East prices every order by individual quotation rather than by a fixed list. Delivery, customs clearance and after-sales support are arranged together with the quotation. To begin, share your application, the hand you prefer and the site where the robot will operate, and a tailored quotation for the Unitree H2-D Ultimate B Humanoid Robot can be requested through the enquiry form available on this page.

Frequently Asked Questions

Which trim does the Ultimate B correspond to?

The H2-D line comes as the H2-D Standard and the H2-D Flagship. Robots Middle East confirms the trim of the Ultimate B in writing with the quotation.

How much can each arm carry?

The H2 Series supports a rated payload of up to 7 kg per arm. The usable load in practice also depends on the fitted end effector and the task.

Which hands can be fitted?

The options are a 2-Finger Gripper, a 3-Finger Dexterous Hand and a 5-Finger Dexterous Hand. The hand included in the Ultimate B configuration is agreed with the quotation.

Can the robot run continuously?

The H2-D Standard runs from a direct power supply for 7*24H operation, while the H2-D Flagship runs for approximately 5h on its battery with replaceable batteries and auto charging. Which applies depends on the confirmed trim.

Is software development supported?

Yes. Unitree provides comprehensive SDKs and APIs together with a mature navigation software stack, and a handheld controller is part of the platform.

What is the robot built from?

The H2 Series uses aerospace-grade aluminium, titanium alloy and high-strength engineering plastics. This combination keeps the structure rigid for handling work.

Where can I buy the Unitree H2-D Ultimate B Humanoid Robot and what does it cost?

You can buy it from Robots Middle East, which supplies it across the Middle East. The cost is set by individual quotation according to the configuration you choose.

Summary

The Unitree H2-D Ultimate B Humanoid Robot is best understood as a capable body waiting for the right tool. Its family offers arms rated up to 7 kg each, a torso that pitches through 0-115° and lifts through 0.46m/0.36m, voice interaction and a software stack aimed at shortening development, while the end of each arm can be a simple gripper or a dexterous hand. The H2-D Standard leans towards fixed stations on continuous power and the H2-D Flagship towards mobile work on a quick-release battery, and confirming which trim and which hand the Ultimate B carries is the first practical step. For organisations ready to put that choice into a quotation with Robots Middle East, this page is the starting point.