BWSENSING Dual Axis Wireless Lora Inclinometer (LR-WL300)
In stock
- BRAND:
- BWSENSING
- PART #:
- LR-WL300
- ORIGIN:
- China
- AVAILABILITY:
- SUBJECT TO AVAILABILITY
- SKU:
- BWSENSING-LR-WL300
BWSENSING Dual Axis Wireless Lora Inclinometer (LR-WL300)
A survey crew might visit a remote embankment a handful of times a year, yet the ground beneath it moves on its own timetable, through every heatwave, every rare storm and every night when nobody is watching. Between those visits the record is blank, and that is often where the important movement happens. The BWSENSING Dual Axis Wireless Lora Inclinometer (LR-WL300) exists to fill that blank. It stays on the structure, measures tilt on two axes and reports over a LoRa wireless network. Because it can be charged by solar energy, the observation becomes a continuous record rather than a series of snapshots.
Robots Middle East supplies the LR-WL300 to engineering consultancies, contractors, infrastructure operators and research groups across the Middle East. Robots Middle East prepares the quotation, coordinates delivery to your site or office, and remains your point of contact for technical questions once the sensors are installed.
Background
Bewis Sensing Technology and the BWSENSING brand
The LR-WL300 is made by Bewis Sensing Technology LLC, an innovative, fast-growing company established in 2010. Since 2019, its products have carried BWSENSING as their approved global brand. The name now covers a wide range of inclination and attitude sensors, from cabled digital inclinometers to wireless monitoring devices such as this one. You can explore the wider line-up in our BWSensing category.
A wireless instrument for structural health monitoring
The LR-WK100 and LR-WL300 are LoRa wireless inclinometers specially designed for structural health monitoring. Two features shape that positioning. The first is LoRa, a long-range, low-power radio technology widely used for sensor networks. With LoRa, measurement points can be spread across a site without a cable run to each one. The second is solar charging, which meets the needs of high-precision long-term monitoring. Taken together, these features describe an instrument intended to be installed, left in place and read remotely over long periods. The sources also name further versions in the same family, the LR-WK100, LR-WM410 and LR-WS2000. However, the figures on this page belong to the LR-WL300 alone.
Technical Specifications
| Specification | Value (LR-WL300) |
|---|---|
| Measurement axes | Dual Axis |
| Accuracy | 0.1° |
| Resolution | 0.01° |
| Wireless network | LoRa wireless network |
| Max transmission distance | 5 KM |
| Software | Customizable Monitoring Cloud System |
| Charging | Can be charged by solar energy |
| Intended use | Structural health monitoring |
Specifications are as published by the manufacturer and are confirmed against the datasheet at quotation.
The manufacturer has not published the weight, dimensions, measuring range, IP rating, operating temperature, battery capacity, power supply, operating frequency band, output data rate or the contents of the box; Robots Middle East confirms each of these with you at quotation.
How does the LR-WL300 differ from a cabled inclinometer?
A conventional inclinometer is wired to a logger, a controller or a PLC. The cable carries power to the sensor and data back from it. That arrangement works well inside a plant room or on a machine, where cable routes already exist. On a bridge deck, a slope, a tower or a long retaining wall, however, every cable run adds trenching, fixings, protection and another point of failure.
The LR-WL300 takes a different approach. Its readings travel over a LoRa wireless network, with a maximum transmission distance of 5 KM. Solar charging means the device is not tied to a mains supply. The result is a sensor that can be placed where the movement is, rather than where the infrastructure happens to reach. The data then flows into the Customizable Monitoring Cloud System. Engineers can follow trends there instead of collecting readings by hand.
A cabled sensor remains the better choice in some situations, for example where a controller needs a direct digital or fieldbus signal. BWSENSING offers such models too. The BWSENSING Cost-Effective Dual-Axis Digital Output With Modbus Inclinometer (BWN427) and the BWSENSING Cost-Effective Dual-Axis Inclinometer (BWM427) are two wired dual-axis options in the range.
What do the accuracy and resolution figures mean for monitoring?
The two figures answer different questions. The accuracy of 0.1° describes how closely a reading reflects the true tilt of the sensor. The resolution of 0.01° describes the smallest change in tilt the instrument can register. In structural health monitoring, both matter, and the second is often the more telling. A structure seldom announces a problem with one large movement. More often it drifts gradually, and a fine resolution allows that drift to show up as a trend across days or weeks.
The dual-axis design means tilt is captured along two perpendicular directions. A structure that leans diagonally, or that settles in one direction during one season and another the next, can therefore be followed without installing two separate sensors. For long-term programmes, the combination of fine resolution, two axes and continuous reporting is what turns a sensor into an early-warning record.
Who is the LR-WL300 for?
The LR-WL300 suits organisations that need to watch a structure over time rather than measure it once. Structural and geotechnical engineering consultancies can deploy it on bridges, retaining walls, slopes and foundations, where repeat manual surveys are costly or hazardous. Asset owners and operators of transport, energy and telecommunications infrastructure will find it useful for distributed sites, where a wireless network is easier to justify than a cabled one. Contractors can use it during construction to observe neighbouring buildings or temporary works. Universities and research institutes may adopt it for field studies that run for many months.
The LR-WL300 is less suitable for buyers who need a sensor wired directly into a machine or control system. They will be better served by a cabled inclinometer. The BWSENSING Cost-Effective Digital Dual-Axis Inclinometer (BWM466) is one example, and further options appear in our Sensors category. Where one of the other LR-W versions might suit a project better, Robots Middle East can compare the versions with you at quotation.
What is the LR-WL300 used for?
- Bridge monitoring – following the tilt of piers, abutments and decks over seasons and after significant events.
- Slope and embankment observation – tracking gradual ground movement on cuttings, embankments and hillsides near roads or railways.
- Retaining walls and foundations – recording leaning or rotation in walls and footings that carry long-term loads.
- Towers and masts – watching the verticality of telecommunications, transmission and lighting structures at remote sites.
- Adjacent structures during construction – checking that excavation or piling work is not disturbing neighbouring buildings.
- Heritage and ageing buildings – keeping a continuous record of movement in structures where intervention must be justified by data.
Pricing and Availability
Robots Middle East supplies the LR-WL300 on quotation, sized to the number of monitoring points and the scope of your project. Please tell us how many sensors you need, where they will be installed and how you intend to use the monitoring cloud system. This allows us to confirm the configuration and the remaining details from the datasheet. Delivery, customs clearance and technical support are arranged together with the quotation. To begin, request a quotation for the BWSENSING Dual Axis Wireless Lora Inclinometer (LR-WL300) using the form available on this page.
Frequently Asked Questions
How many axes does the LR-WL300 measure?
The LR-WL300 is a dual-axis inclinometer, so it measures tilt along two perpendicular axes from a single device.
What accuracy and resolution does the LR-WL300 offer?
The LR-WL300 has an accuracy of 0.1° and a resolution of 0.01°.
How does the LR-WL300 send its data?
It communicates over a LoRa wireless network, with a maximum transmission distance of 5 KM. Readings can be viewed in the Customizable Monitoring Cloud System.
Can the LR-WL300 run on solar power?
The device can be charged by solar energy, meeting the needs of high-precision long-term monitoring. Robots Middle East can advise on the power arrangement for your site.
What is the IP rating and measuring range?
These figures are not yet available for the LR-WL300. Robots Middle East will provide both with your quotation before you order.
Is the LR-WL300 the same as the LR-WK100?
The LR-WK100 and LR-WL300 share the same family description as LoRa wireless inclinometers for structural health monitoring. The figures on this page apply to the LR-WL300 only.
Where can I buy the BWSENSING Dual Axis Wireless Lora Inclinometer (LR-WL300) and what does it cost?
You can buy it from Robots Middle East, which supplies it across the Middle East. Pricing is provided on a project quotation, which you can request on this page.
Summary
Periodic surveys leave long gaps, and structures do not wait for the next visit to move. The BWSENSING Dual Axis Wireless Lora Inclinometer (LR-WL300) closes those gaps. It measures tilt on two axes with 0.1° accuracy and 0.01° resolution, reports over a LoRa network up to 5 KM, and is designed for long-term structural health monitoring with solar charging. It comes from Bewis Sensing Technology, whose products have carried the BWSENSING brand since 2019. Robots Middle East prepares the quotation, arranges delivery and supports the installation. If you want a continuous record in place of occasional snapshots, this page is the starting point.