Elephant Robotics Technology Mycobot-280-Pi (4010100016)

A desktop robotic arm with its own Raspberry Pi computer on board, so code, control and motion sit together in one unit on the bench. Robots Middle East supplies it to universities, schools and research laboratories that want real hardware for teaching and prototyping manipulation.

In stock

BRAND:
ELEPHANT ROBOTICS
PART #:
4010100016
ORIGIN:
China
AVAILABILITY:
SUBJECT TO AVAILABILITY
SKU:
Elephant Robotics Technology-4010100016
AED 4,157.16
Loading...

Elephant Robotics Technology Mycobot-280-Pi (4010100016)

Robotics courses tend to stall at the same point: an algorithm that runs flawlessly in simulation meets real joints, real friction and a real controller, and the class discovers how much lay between the two. The Elephant Robotics Technology Mycobot-280-Pi (4010100016) shrinks that gap to the size of a desk. It is a six-axis arm whose control computer is a Raspberry Pi microprocessor running a built-in Ubuntu Mate 20.04 operating system. Attach a monitor, keyboard and mouse, and students can write, run and debug motion code on the robot itself, with no PC acting as master controller.

Robots Middle East supplies the Mycobot-280-Pi to universities, schools, research groups and engineering teams across the Middle East. Robots Middle East prepares the quotation, arranges delivery to your site and provides support once the arm is in use. Our team can also advise on how it fits into a teaching laboratory or a prototyping bench alongside other equipment from our Cobots range.

Background

Elephant Robotics and the myCobot family

Elephant Robotics builds collaborative and desktop robotic arms. Its myCobot line is a family of compact arms intended for education, research and development work, where an arm must be safe to place on an ordinary bench and simple to program. The family shares a common arm format across several controller options, and this listing covers the model built around the Raspberry Pi. Elephant Robotics has released two versions of the Pi model, the myCobot 280 Pi 2023 and an earlier version. Every figure on this page belongs to the 2023 version. The wider manufacturer range is collected on our Elephant page.

An arm with its own computer

The defining idea of this model is that the controller lives inside the product. The main control system has 2GB of memory and a 500 MHz VideoCore VI GPU. It offers two USB 3.0 and two USB 2.0 ports for peripherals, and an auxiliary control core with 4MB of flash handles the joint side of the system. Motion comes from six built-in metal servo motors, each read by a 12BIT magnetic encoder and driving steel gears inside a metal shell. Because the moving parts carry little inertia, the arm responds quickly and rotates smoothly. For a learner, this means the full chain from source code to joint movement can be observed and modified on one device.

Technical Specifications

SpecificationValue (myCobot 280 Pi 2023)
Degrees of freedom6
Working radius280 mm
Payload250 g
Weight860 g
Positioning accuracy± 0.5 mm
Working lifespan500 h
Power inputDC 12V5A
USBUSB 3.0 × 2, USB 2.0 × 2
Main control GPU500 MHz VideoCore VI
Main control memory2GB
Auxiliary control core flash4MB
Motor encoder12BIT magnetic encoder
Servo motors6 built-in metal servo motors
Gear typeSteel
ShellMetal
Operating systemBuilt-in Ubuntu Mate 20.04
ROS 2Supported
MacSupported
MODBUSSupported

Specifications are as published by the manufacturer and are confirmed against the datasheet at quotation.

The manufacturer has not published the dimensions, the package contents, the ingress protection rating, the rated power consumption, the repeatability, the maximum joint speed or whether a camera is included; Robots Middle East confirms these at quotation.

What makes the Mycobot-280-Pi different from a PC-tethered desktop arm?

Many small arms rely on a separate computer that sends every command over a cable. That works well enough in a research office, but it complicates a classroom. Each workstation needs a configured laptop, drivers must match, and a lesson can be lost to setup. The Mycobot-280-Pi carries its own operating system, so a station consists of the arm, a screen, a keyboard and a mouse. Students sit down at a Linux environment that is already prepared for the robot.

Being self-contained does not mean being closed. The arm supports ROS 2, the robotics middleware now standard in university courses and research groups, so skills learnt on it transfer directly to larger systems. It supports MODBUS, the protocol widely used to link industrial controllers. That allows the arm to stand in for a production cell when students or engineers rehearse communication between devices. Mac support gives teams on Apple computers a route to the arm as well. The arm therefore works both as a standalone workstation and as a node in a wider setup.

Is the Mycobot-280-Pi robust enough for regular teaching use?

Hardware that many hands will use needs to tolerate imperfect handling. The 2023 version is built with a metal shell, steel gears and metal servo motors rather than lighter plastic assemblies. The 12BIT magnetic encoders give the controller dependable joint position feedback. The working lifespan is 500 h, which laboratory managers can use to plan how the arm is rotated between groups across a term. At 860 g, the arm can be moved between rooms and stored safely after a session. Its payload of 250 g suits light objects such as blocks, markers and small parts, which is the material of most teaching exercises.

Who is the Mycobot-280-Pi for?

The clearest fit is university engineering and computer science departments that teach kinematics, motion planning and ROS 2. These departments benefit from a real arm at every bench without a matching fleet of configured PCs. Secondary schools and STEM centres running robotics programmes gain a single device that combines a computer and an actuator, which keeps lessons focused on concepts rather than cabling. Research groups can use the arm to test manipulation ideas quickly before committing them to larger hardware. Automation engineers can use its MODBUS support to prototype controller communication on a desk. Makers and start-ups building proof-of-concept demonstrations will find the standalone Linux environment convenient for rapid iteration.

Teams that prefer a different on-board controller can compare the Mycobot-280 Jetson Nano. Projects that call for a larger, industrial-format arm can look at the myCobot Pro 630. Robots Middle East will help you weigh the options against your curriculum or project.

What is the Mycobot-280-Pi used for?

  1. Robotics teaching: hands-on lessons in joint control, coordinate frames and trajectory planning on real hardware.
  2. ROS 2 training: practical exercises in the middleware used across research and industry.
  3. Algorithm prototyping: testing manipulation and motion-planning ideas before scaling to larger arms.
  4. Industrial protocol practice: rehearsing MODBUS communication between an arm and other controllers.
  5. Pick-and-place demonstrations: sorting and moving light objects within the arm's working radius.
  6. Exhibitions and outreach: compact, self-contained demonstrations of robotics at open days and events.

Pricing and Availability

Robots Middle East supplies the Mycobot-280-Pi on a quotation basis, so the offer reflects the quantity, the configuration and the destination you require. Delivery, customs and after-sales support are arranged together with the quotation. If you are equipping a full laboratory, please tell us the number of stations and any accessories you are considering, and we will prepare a single coordinated proposal. To begin, please send your requirements through the quotation request available on this page.

Frequently Asked Questions

Does the Mycobot-280-Pi need a separate computer?

No. It can be used by connecting a monitor, keyboard and mouse directly, without a PC acting as master controller.

Which operating system does it run?

It runs a built-in Ubuntu Mate 20.04 operating system on its Raspberry Pi microprocessor.

Does it support ROS 2?

Yes. ROS 2 is supported, as are MODBUS and Mac.

How much can the arm carry?

The 2023 version has a payload of 250 g and a working radius of 280 mm.

How accurate is it?

The 2023 version has a positioning accuracy of ± 0.5 mm. Each joint is read by a 12BIT magnetic encoder.

What is the arm built from?

The 2023 version has a metal shell, steel gears and six built-in metal servo motors.

Where can I buy the Elephant Robotics Technology Mycobot-280-Pi (4010100016) and what does it cost?

You can buy it from Robots Middle East, which supplies it across the Middle East. The cost depends on quantity, configuration and destination, so please request a quotation on this page.

Summary

The distance between code on a screen and motion on a bench is where much robotics learning succeeds or fails. The Mycobot-280-Pi closes that distance by putting a Raspberry Pi computer, Ubuntu Mate 20.04 and six metal servo motors with magnetic encoders into one desktop arm. ROS 2 and MODBUS support connect it to the wider world of research and automation. Its metal shell and steel gears suit regular hands-on use, and its standalone operation keeps every station simple. For departments, schools and development teams that want real manipulation hardware without a tangle of supporting PCs, this page is the starting point.

Specifications

General

BRAND ELEPHANT ROBOTICS
PART # 4010100016
ROBOT TYPE COBOT

What's included

Elephant Robotics Technology Mycobot-280-Pi (4010100016)

Product Questions

No questions yet. Be the first to ask.

0/255

Write a Review
You're reviewing: Elephant Robotics Technology Mycobot-280-Pi (4010100016)
loader
Loading...

You submitted your review for moderation.