Elephant Robotics Technology Mycobot Pro Soft Gripper & Air Compressor For Mycobot 320, Mycobot Pro 630 (4010700018)
In stock
- BRAND:
- ELEPHANT ROBOTICS
- PART #:
- 4010700018
- ORIGIN:
- China
- AVAILABILITY:
- SUBJECT TO AVAILABILITY
- SKU:
- Elephant Robotics Technology-4010700018
Elephant Robotics Technology Mycobot Pro Soft Gripper & Air Compressor For Mycobot 320, Mycobot Pro 630 (4010700018)
The hardest moment in any pick-and-place cycle is seldom the reach or the lift; it is the instant of contact, when a gripper either adapts to what it touches or marks, dents or crushes it. The Elephant Robotics Technology Mycobot Pro Soft Gripper & Air Compressor For Mycobot 320, Mycobot Pro 630 (4010700018) approaches that instant from the opposite direction to a conventional jaw. Rather than a motor driving rigid fingers to a fixed position, compressed air inflates fingers of flexible polymer silicone, which bend and deform around the object and follow its contours. The outcome is an end effector that can wrap a wide variety of objects without causing damage to them, and which accommodates multiple shapes and sizes without a change of tooling between tasks.
Robots Middle East supplies this soft gripper to universities, research laboratories, system integrators and manufacturers across the Middle East. Our team prepares a formal quotation for each enquiry, advises on which version is appropriate for your installation, and remains your point of contact for support once the equipment has been delivered, so that what you order fits the myCobot Pro arm already on your bench or production line.
Background
Elephant Robotics and the myCobot family
Elephant Robotics is a developer of collaborative robot arms whose myCobot series spans compact desktop models, such as the Elephant Robotics Technology Mycobot-280-Pi (4010100016), through to the larger Pro arms intended for more demanding work. Around these arms the company offers a range of end effectors, so that a single arm can be adapted to different tasks by exchanging the tool at its flange. The soft gripper belongs to that accessory ecosystem and is designed for the myCobot Pro robotic arms; the product name identifies the Mycobot 320 and the Mycobot Pro 630 as the arms it is intended for. The wider selection of the manufacturer's equipment is gathered in our Elephant category.
How pneumatic soft gripping works
The principle is simple and elegant. Each "finger" of the soft claw is made of flexible polymer silicone, and when air is introduced the material bends and deforms in a controlled manner, closing around whatever lies between the fingers. Because the silicone conforms to the surface instead of pressing on it at a few hard points, the grip is distributed over a larger area of the object. This is why the gripper is safe for the items it handles and can wrap various objects without causing damage. It also explains the one firm requirement of the design: the gripper must be connected to an air compressor in order to operate, since air is the medium that drives every movement of the fingers.
Technical Specifications
| Specification | Value |
|---|---|
| Clamping range | 36-136mm |
| Clamp force | Vertical 600g, wrap 1080g |
| Repeatability precision | 0.5 mm |
| Size | 170x128x195mm |
| Gripper weight | 365 grams |
| Drive mode | Pneumatic |
| Control interface | I/O control |
| Fixing method | Screw fixed |
| Air pump working voltage (version with Air Compressor) | 220V/50HZ |
Specifications as published by the manufacturer; confirmed against the datasheet at quotation.
The manufacturer has not published the flow rate, power rating or weight of the air compressor, the operating pressure, the length of the air tube, the grade of the gripper material or a list of package contents; these details are confirmed at quotation.
How does a pneumatic soft gripper differ from a rigid mechanical gripper?
A rigid gripper is defined by position: its jaws travel to a set opening and close until they meet resistance, and the object must suit the jaws. A soft gripper is defined by compliance. Here, the silicone fingers bend under inflation and take on the shape of the item, which is why the clamp force carries two different values: 600g for a vertical grip and 1080g when the fingers wrap around the object. In practice, an item that can be enveloped is held more securely than one that is merely pinched from above.
The clamping range of 36-136mm allows the same tool to accept objects of quite different sizes, and a repeatability precision of 0.5 mm supports consistent placement from cycle to cycle. Control is through I/O, which keeps integration straightforward: the arm's controller or a supervisory system switches the air supply to open and close the fingers, without the need for a dedicated motor driver at the tool. The gripper is screw fixed to the arm, and at 365 grams it adds a modest load to the wrist.
Two further properties set this design apart from many mechanical alternatives. It can be used completely immersed in water, and its listed features include FDA inspection and a passed food contact inspection. For applications involving washing, wet produce or direct contact with food, these points often decide the choice of end effector before any other specification is considered.
Should you order the version with or without the air compressor?
Two versions are offered: the gripper without an air compressor, and the gripper supplied with one. Since the gripper cannot operate without a source of compressed air, the decision rests on what is already available at your site. The version with the air compressor provides a complete, self-contained set-up; its air pump works at 220V/50HZ, which should be checked against the electrical supply in the laboratory or plant where it will be installed. This is usually the more convenient choice for teaching laboratories, research groups and pilot cells that have no compressed-air infrastructure of their own.
The version without the air compressor is intended for facilities that already run a compressed-air network, as many production plants do. In that case, the remaining questions concern the connection itself — operating pressure, fittings and tubing — and Robots Middle East works through them with you before an order is placed.
Who is the Mycobot Pro Soft Gripper for?
The gripper suits owners of myCobot Pro arms who need to handle items that a rigid jaw would damage or fail to hold. Research institutions and universities working with the Elephant Robotics myCobot Pro 630 Robot Arm (4010200011) will find it a practical way to explore soft robotics, adaptive grasping and handling of irregular objects, using a tool that is controlled through simple I/O signals.
System integrators building cells for food handling, fresh produce, consumer electronics or daily chemical products form a second group. For them, the listed food contact inspection, the ability to operate fully immersed in water and the tolerance of varied shapes and sizes reduce the number of custom tools a single cell requires. Developers of service and retail robots, where a machine may need to pass an item to a customer or handle packaged goods, represent a third. Buyers comparing this tool with other collaborative-robot equipment can browse the full Cobots category to see the arms and accessories available from Robots Middle East.
What is the Mycobot Pro Soft Gripper used for?
- Food and fresh produce handling — picking delicate items on food processing lines where bruising or crushing is unacceptable.
- 3C electronics — moving electronic components and assemblies that are sensitive to concentrated pressure.
- Daily chemical products — handling bottles, tubes and moulded containers of varying shape on packing and sorting lines.
- Intelligent assembly and automatic sorting — integrating into industrial cells that must cope with a changing mix of object sizes.
- Service and retail robots — giving customer-facing robots a safe, compliant grip for passing and arranging goods.
- Scientific research equipment — supporting laboratory studies in soft robotics, grasp planning and human-robot collaboration.
Pricing and Availability
Robots Middle East supplies the Mycobot Pro Soft Gripper by quotation, so that the version, the compatible arm and the air supply arrangement are agreed before you commit. Please tell us which myCobot Pro arm you use, whether your site already has compressed air, and the application you have in mind, and we will prepare a formal proposal. Delivery, customs clearance and after-sales support are arranged together with the quotation. To begin, use the quotation request available on this page.
Frequently Asked Questions
Does the gripper need an air compressor?
Yes. The gripper must be connected to an air compressor to operate, which is why it is offered both with and without one.
Which robot arms is the gripper intended for?
It is designed for myCobot Pro robotic arms, and the product name identifies the Mycobot 320 and the Mycobot Pro 630. Our team can advise on fitting it to your specific arm.
How is the gripper controlled and mounted?
It uses I/O control and is screw fixed to the arm. The drive mode is pneumatic.
Can the gripper be used in wet conditions?
Yes. It can be used completely immersed in water, which makes it relevant to washing and wet-handling tasks.
Is the gripper suitable for handling food?
Its listed features include FDA inspection and a passed food contact inspection, and food and fresh produce are among its intended applications.
What sizes and loads can the gripper handle?
The clamping range is 36-136mm. Clamp force is 600g in a vertical grip and 1080g when the fingers wrap around the object.
Where can I buy the Mycobot Pro Soft Gripper and what does it cost?
You can obtain it from Robots Middle East, which supplies customers across the Middle East. Pricing is provided in a formal quotation prepared for your configuration, so please submit a request and our team will respond.
Summary
Every gripper is ultimately judged at the moment it touches the object, and this tool is built around that moment. Inflatable silicone fingers that bend and conform, a clamping range of 36-136mm, a wrap force of 1080g and simple I/O control give myCobot Pro owners a way to handle fragile, irregular or wet items that rigid jaws struggle with. The ability to work fully immersed in water and the listed food contact inspection widen its reach into food, electronics, chemical products, retail and research. Choose the version with the air compressor for a self-contained set-up, or the version without it where compressed air is already installed. For a quotation from Robots Middle East, this page is the starting point.