SIASUN Industrial Robot Arm With 2658 mm Reach, 210kg Max Payload, 6 DOF (SR210A-210/2.65)
In stock
- BRAND:
- SIASUN
- PART #:
- SR210A-210/2.65
- ORIGIN:
- China
- AVAILABILITY:
- FOR OPPORTUNITIES OVER 1 MILLION USD
- SKU:
- SIASUN-SR210A-210/2.65
SIASUN Industrial Robot Arm With 2658 mm Reach, 210kg Max Payload, 6 DOF (SR210A-210/2.65)
On a factory floor plan, an industrial robot first appears as a circle: a radius drawn around its base that decides which fixtures, conveyors and pallets it can serve. The SIASUN Industrial Robot Arm with 2658 mm Reach, 210kg Max Payload, 6 DOF (SR210A-210/2.65) draws that circle at 2658 mm and carries 210 kg (463 lbs) within it, returning to position with a repeatability of ±0.06mm. For engineers laying out a welding or heavy-handling cell, that combination means fewer compromises between the size of the working envelope and the weight of the tooling mounted at the end of the arm.
Robots Middle East supplies the SR210A-210/2.65 to manufacturers, system integrators and industrial projects across the Middle East. Our team prepares the quotation, coordinates delivery to your site and remains your point of contact for technical support once the robot is in service, so that a single partner accompanies the project from the first specification to commissioning and beyond.
Background
SIASUN and its place in industrial robotics
SIASUN is a Chinese robotics and automation company based in Shenyang, with roots in the research community of the Chinese Academy of Sciences. Over the years it has built a broad portfolio that spans articulated industrial arms, mobile and heavy-duty transport robots, and complete automation lines for sectors such as automotive manufacturing, metalworking and logistics. Its heavy-payload articulated robots, gathered in the Large Payload range, are intended for cells in which the arm must move substantial tooling or workpieces while holding a consistent path over long production runs.
A reinforced wrist and a sealed construction
The defining engineering choice in the SR210A-210/2.65 is its wrist. A reinforced wrist structure with high-torque output allows the arm to improve speed and payload together, rather than trading one against the other. This matters for heavy end-of-arm tooling such as welding guns or large grippers, where the strength of the wrist often sets the limit on cycle time. The wrist is protected to IP67, and critical components use a double-sealed structure for durability. Motion is governed by SIASUN's self-developed intelligent control system, which is compatible with welding guns and controllers from multiple brands and comes with integrated multi-industry process packages that make a wide range of manufacturing tasks easier to handle.
Technical Specifications
| Specification | Value |
|---|---|
| Model | SR210A-210/2.65 |
| Degrees of freedom | 6 DOF |
| Payload | 210 kg (463 lbs) |
| Reach | 2658 mm |
| Repeatability | ±0.06mm |
| Protection (wrist) | IP67 |
| Sealing | Double-sealed structure on critical components |
| Wrist design | Reinforced wrist with high-torque output |
| Control system | Self-developed intelligent control system |
| Process software | Integrated multi-industry process packages |
| Equipment compatibility | Welding guns and controllers from multiple brands |
Specifications are as published by the manufacturer and are confirmed against the datasheet at quotation.
The manufacturer has not published the weight, the axis speeds, the axis motion ranges, the power supply, the controller model, the operating temperature, the base dimensions or the wrist load moments; these are confirmed at quotation.
How does the SR210A-210/2.65 compare with other versions in the family?
SIASUN offers several configurations around this platform, including the SR210A-210/3.05-DW, the SR210-120/3.05 and the SR220A-220/2.66. Each is a distinct machine with its own ratings, and the figures on this page belong to the SR210A-210/2.65 alone. It should never be assumed that a payload, reach or repeatability value carries over from one version to another.
What sets this version apart is the pairing of its full 210 kg (463 lbs) payload with a reach of 2658 mm. Where a cell needs the arm to stretch further across a fixture or a pallet, the SIASUN Industrial Robot Arm with 3053 mm Reach, 120kg Max Payload, 6 DOF (SR210-120/3.05) is listed with a longer reach and a lower payload, which suits lighter tooling spread over a larger area. The SIASUN Industrial Robot Arm (SR210A-210/3.05-DW) is a separate configuration within the SR210A family, and its ratings are set out on its own product page. Choosing between them is essentially a question of which matters more in your layout: carrying the heaviest tool, or reaching the furthest point.
What does IP67 wrist protection mean for a production cell?
Under the international IP code, the first digit 6 denotes protection against dust ingress, and the second digit 7 denotes protection against temporary immersion in water. On a robot, the wrist is the part that sits closest to the process: it meets weld spatter, grinding dust, cutting fluids and the general grime of a heavy production floor. An IP67 wrist, combined with the double-sealed structure of critical components, is designed to keep contaminants away from the joints that carry the tool.
For plants in the region, where airborne dust and high ambient loads on equipment are everyday concerns, protection at the wrist is a practical consideration rather than a marketing line. The IP67 rating applies to the wrist; the integrator should still assess the full cell environment when specifying the installation.
Who is the SR210A-210/2.65 for?
The arm is aimed first at manufacturers and integrators who build welding cells around heavy guns. Its compatibility with welding guns and controllers from multiple brands means an existing tooling standard can often be retained, rather than redesigning the cell around a single supplier's equipment.
It also suits fabricators and component manufacturers who move heavy parts between machines, fixtures and conveyors, where a 210 kg (463 lbs) rating leaves headroom for both gripper and workpiece. Automotive suppliers, metal structure producers and makers of large assemblies are typical candidates, as are system integrators delivering turnkey lines for industrial projects across the Middle East.
Buyers whose layout calls for a longer reach with lighter tooling should compare the SR210-120/3.05, while those weighing alternative configurations within the SR210A family can review the SR210A-210/3.05-DW. Robots Middle East can help match the right version to your cell drawings.
What is the SR210A-210/2.65 used for?
- Spot and arc welding cells – carrying heavy welding guns from multiple brands under the control of a single system.
- Heavy material handling – transferring large castings, forgings and fabricated parts between workstations.
- Machine tending – loading and unloading presses, machining centres and other production machines with heavy blanks.
- Palletising and depalletising – stacking dense or bulky goods at the end of a production line.
- Assembly of large components – positioning heavy sub-assemblies precisely for joining or fastening.
- Processing in dusty environments – working close to grinding, cutting or welding processes with a sealed, protected wrist.
Pricing and Availability
The SR210A-210/2.65 is offered on a quotation basis, so that the configuration, controller set-up and process packages reflect your application rather than a generic listing. Delivery, customs clearance and technical support are arranged together with the quotation by Robots Middle East. To begin, share your payload, reach and process requirements with our team; the quotation request is available on this page.
Frequently Asked Questions
What payload does the SR210A-210/2.65 carry?
The arm is rated for a payload of 210 kg (463 lbs), which covers the tool and the workpiece together.
What is the reach of the SR210A-210/2.65?
Its reach is 2658 mm, measured from the robot's base to the limit of its working envelope.
How precise is the arm?
The SR210A-210/2.65 has a repeatability of ±0.06mm, allowing it to return to taught positions consistently over long production runs.
Can I use my existing welding equipment?
The self-developed intelligent control system is compatible with welding guns and controllers from multiple brands. Robots Middle East can advise on how your specific equipment fits into the cell.
Is the robot protected against dust and water?
The wrist is rated IP67, and critical components use a double-sealed structure for durability in demanding production environments.
Does the robot include process software?
Yes. The control system comes with integrated multi-industry process packages that make a wide range of manufacturing tasks easier to handle.
Where can I buy the SR210A-210/2.65 and what does it cost?
Robots Middle East supplies the SR210A-210/2.65 across the Middle East on a quotation basis. The price depends on the configuration, options and delivery arrangements, and it is provided in a formal quotation upon request.
Summary
Every robot cell begins with the circle the arm can sweep and the weight it can carry within that circle. The SR210A-210/2.65 sets those two boundaries at 2658 mm and 210 kg (463 lbs), holds its path to ±0.06mm, and protects its reinforced, high-torque wrist to IP67 behind double-sealed critical components. Its open control system accepts welding guns and controllers from multiple brands, and integrated process packages help it adapt to different manufacturing tasks. For plants and integrators across the Middle East planning a heavy welding or handling cell with Robots Middle East, this page is the starting point.