SIASUN Intelligent Grinding And Polishing Solutions With Industrial Robots - Polishing Expert System (SR25A-20/1.80, SR12A-12/1.46)
In stock
- BRAND:
- SIASUN
- PART #:
- SR25A-20/1.80, SR12A-12/1.46
- ORIGIN:
- China
- AVAILABILITY:
- FOR OPPORTUNITIES OVER 1 MILLION USD
- SKU:
- SIASUN-SR25A-20/1.80,-SR12A-12/1.46
SIASUN Intelligent Grinding And Polishing Solutions With Industrial Robots - Polishing Expert System (SR25A-20/1.80, SR12A-12/1.46)
Polishing is usually the last operation a part sees, which makes it the most expensive place to make a mistake: every hour of casting, machining and handling already sits in the workpiece when it reaches the wheel. An uneven pass, a gouge or a dull patch at this stage turns a finished component into scrap or rework. The SIASUN Intelligent Grinding And Polishing Solutions With Industrial Robots - Polishing Expert System (SR25A-20/1.80, SR12A-12/1.46) is designed to remove that final-stage risk by making the polishing step as controlled and repeatable as the operations before it. Rather than a single robot sold on its own, it is a complete cell in which the arm, the tools, the fixtures, the control and the dust handling are engineered to work together, offered with a choice of two SIASUN robot models.
Robots Middle East sells and supplies the SIASUN Polishing Expert System to manufacturers across the Middle East. Robots Middle East prepares the quotation for your chosen configuration, arranges delivery to your facility and provides support once the system is in operation, so that your finishing project has a single point of contact from first enquiry to production.
Background
SIASUN and its industrial robot range
SIASUN is a robotics manufacturer whose catalogue covers articulated industrial arms across a wide span of payloads, as well as mobile robots for material handling. The Polishing Expert System draws on that range: it is built around SIASUN's own robotic system rather than a third-party arm, which means the robot, its control and the application software come from the same engineering source. Buyers who wish to see the wider family of arms from which this system is drawn can explore the Industrial Robots category.
A process package rather than a bare arm
The defining idea of this system is that polishing quality depends on far more than the robot. The Polishing Expert System is a one-stop solution encompassing the SIASUN robotic system, polishing tools, a fixture system, a control system and a water dust removal system. At its centre sits a mature polishing software package, developed from years of experience in the polishing field, which offers high precision, efficiency, reliability and intelligence. Advanced control algorithms and precision sensor technology work together to polish product surfaces uniformly, optimising surface smoothness and flatness, while the system adapts to different product shapes and sizes to keep the process precise and consistent.
The mechanical design follows the same logic. A bow-shaped arm gives the robot high adaptability and flexibility when working around complex curved surfaces. The arm and wrist carry enhanced protection levels, making them resistant to the polishing dust and liquid splashes that are unavoidable in finishing work. An enhanced load design allows the robot to withstand the repeated impact forces that polishing produces, supporting continuous, long-term, high-quality output. Finally, a compact and lightweight construction improves space utilisation and allows a higher layout density on the shop floor.
Technical Specifications
| Specification | SR25A-20/1.80 | SR12A-12/1.46 |
|---|---|---|
| Repeat positioning accuracy | ±0.05mm | ±0.03mm |
| Payload | — | 12 kg (26.5 lbs) |
| Reach | — | 1465mm |
Specifications are as published by the manufacturer and are confirmed against the datasheet at quotation.
The manufacturer has not published the payload or reach of the SR25A-20/1.80, nor, for either model, the robot weight, the IP rating, the power supply, the number of axes, the controller model, the overall system dimensions or the name of the polishing software; all of these are confirmed at quotation.
What is the difference between the SR25A-20/1.80 and the SR12A-12/1.46?
Both versions share the same system concept: the bow-shaped arm, the protected arm and wrist, the reinforced load design, the polishing software package and the surrounding tooling, fixtures, control and water dust removal. Where they differ is in the robot at the heart of the cell.
The SR12A-12/1.46 offers a repeat positioning accuracy of ±0.03mm, a payload of 12 kg (26.5 lbs) and a reach of 1465mm. That combination suits work where the finest repeatability matters and where the polishing head and workpiece fall comfortably within a 12 kg payload.
The SR25A-20/1.80 offers a repeat positioning accuracy of ±0.05mm and shares every other element of the system with its sibling. Choosing between the two therefore comes down to the weight of your tooling, the size of your parts and the repeatability your finish demands, and Robots Middle East will help you match the version to your application before you commit.
Why choose a complete polishing system rather than a bare robot arm?
A standalone arm can be programmed to move a polishing tool, but the arm alone does not deliver a consistent finish. The tool, the way the part is held, the control strategy and the management of dust and slurry all shape the result. When these elements are sourced separately, the integration work, and the risk that comes with it, falls on the buyer.
The Polishing Expert System addresses this by supplying those elements as one engineered package. The fixture system holds the part, the control algorithms and precision sensors keep the polishing uniform across the surface, and the water dust removal system deals with the debris that polishing produces. The robot itself is built for the job, with protection against dust and splashes and a load design intended to cope with repeated impact. For a manufacturer moving from manual polishing to automation for the first time, this shortens the path from purchase to stable production and reduces the number of separate suppliers involved.
Who is the SIASUN Polishing Expert System for?
The system is aimed at manufacturers for whom surface finish is a visible measure of quality and for whom manual polishing has become a bottleneck, whether because of labour availability, inconsistent results or the working conditions in the polishing area. Producers of metal hardware, fittings and fixtures, cast and machined components, and consumer goods with polished housings are typical candidates, as are contract finishers serving several of those sectors.
Plants with limited floor space will value the compact, lightweight construction and the higher layout density it allows, which can make it possible to place several cells where manual stations once stood. Operations dealing with a varied product mix benefit from the system's ability to adapt to different product shapes and sizes.
Within the system, the SR12A-12/1.46 is the natural choice where the tightest repeatability is the priority and the tooling and parts sit within its payload and reach. Buyers comparing it with SIASUN's broader range of compact arms may also wish to review the Small Payload category. The SR25A-20/1.80 is the alternative to discuss with Robots Middle East where your application calls for a different robot class.
What is the SIASUN Polishing Expert System used for?
- Curved surface finishing: polishing contoured and free-form parts that the bow-shaped arm is designed to follow.
- Metal hardware and fittings: producing a uniform finish on handles, taps, fixtures and similar components.
- Castings and machined parts: grinding and polishing surfaces after casting or machining to improve smoothness and flatness.
- Mixed-product lines: handling parts of different shapes and sizes within the same cell.
- Replacing manual polishing stations: moving operators away from dust and splashes while keeping output consistent.
- High-density finishing layouts: placing compact cells close together to raise capacity within an existing floor area.
Pricing and Availability
Every Polishing Expert System is configured around the parts it will finish, so pricing is provided by quotation rather than as a list figure. Robots Middle East will review your workpieces, finish requirements and production volumes, recommend the appropriate robot version and finalise the cell configuration. Delivery, customs and support are arranged together with the quotation. To begin, you may request a quotation using the form available on this page.
Frequently Asked Questions
What does the SIASUN Polishing Expert System include?
It encompasses the SIASUN robotic system, polishing tools, a fixture system, a control system and a water dust removal system, supplied as a one-stop solution.
Which version offers the higher repeatability?
The SR12A-12/1.46 has a repeat positioning accuracy of ±0.03mm, compared with ±0.05mm for the SR25A-20/1.80.
What are the payload and reach of the SR12A-12/1.46?
The SR12A-12/1.46 has a payload of 12 kg (26.5 lbs) and a reach of 1465mm.
Can the robot cope with the dust and liquid of polishing work?
Yes. The arm and wrist have enhanced protection levels and are resistant to polishing dust and liquid splashes, and the water dust removal system manages debris within the cell.
Can one system handle different parts?
The system adapts to different product shapes and sizes, maintaining precision and consistency in the polishing process.
Why does the robot have a bow-shaped arm?
The bow-shaped arm design gives the robot high adaptability and flexibility when handling complex curved surfaces, which are common in polishing work.
Where can I buy the SIASUN Polishing Expert System and what does it cost?
You can buy it from Robots Middle East, which supplies the system across the Middle East. The cost depends on the chosen version and configuration, so it is provided by quotation on request.
Summary
Because polishing comes last, it decides whether all the value built into a part leaves the factory or ends up in the scrap bin. The SIASUN Polishing Expert System treats that final step as an engineered process rather than a manual craft, combining a bow-shaped, protected and impact-resistant robot with dedicated tools, fixtures, control, water dust removal and a mature polishing software package. With the SR12A-12/1.46 offering ±0.03mm repeatability and the SR25A-20/1.80 offering ±0.05mm, buyers can match the robot to their application, with Robots Middle East arranging delivery and support. For manufacturers ready to bring the same control to finishing that they already apply to every earlier operation, this page is the starting point.