SIASUN Truss Robot

A modular overhead gantry system from SIASUN, assembled from standardised units to carry parts and tools between machines along linear axes. Robots Middle East supplies it to production lines that need handling automation sized to their own floor rather than to a fixed catalogue frame.

In stock

BRAND:
SIASUN
PART #:
Truss Robot
ORIGIN:
China
AVAILABILITY:
FOR OPPORTUNITIES OVER 1 MILLION USD
SKU:
SIASUN-Truss-Robot

SIASUN Truss Robot

Automation projects often stall at the same point: the standard machine does not fit the hall, and the bespoke one takes too long to engineer. The SIASUN Truss Robot offers a third route. It is not a single fixed machine but a set of standardised modular units, combined to match the layout, the load and the motion that a line requires, then extended or reconfigured when production changes. At purchase it behaves like a catalogue product; once installed, it behaves like a system built for your floor.

Robots Middle East supplies the SIASUN Truss Robot to manufacturers and system integrators across the Middle East. We prepare each quotation around the sub-series and configuration your application calls for, arrange delivery to your site and remain your point of contact for support after commissioning, so that your engineering team works with one regional partner from the first enquiry to steady production.

Background

SIASUN and the M series

SIASUN developed its modular truss robot, known as the M series, as a standard product shaped by market demand. The series comprises six sub-series, each suited to different applications, and the versions named in the sources, the MGI, MGH and MGA, show how the range covers different axis arrangements and load classes. Behind the standard catalogue sits a body of project work: SIASUN has gained the trust and support of clients worldwide through thousands of project engineering experiences, and it can customise complete and advanced industry solutions where a standard configuration is not sufficient. The wider family is presented on the SIASUN Modular Truss Robot (M Series) page.

Standardised modules and rectangular guide rails

Every truss robot in the series is composed of standardised modular units, which are flexible in combination, easy to install and highly adaptable. Because the modules are shared across products, they offer good interchangeability and versatility, which makes both installation and replacement more convenient. SIASUN supports this approach with what it calls a “parts supermarket”, able to supply the modules a customer requires at any time. On the horizontal axes, the X-axis and Y-axis, all series use a rectangular guide rail designed by SIASUN, running with driving roller bearings for ultra-high-speed movement. The X-axis stroke can be extended infinitely to meet user requirements, so the length of the machine follows the length of the line rather than the other way round.

Technical Specifications

SpecificationM series (overall)MGIMGHMGA
Load range1 to 5000 kg1 to 1000 kg1 to 1000 kg1 to 5000 kg
Maximum speed240m/min along the X-axis, Y-axis and Z-axis240 m/min along the X-axis and Z-axis240 m/min along the X-axis and double Z-axisHigh-speed movement of X-axis, Y-axis, Z-axis
Motion axesX-axis, Y-axis, Z-axis; additional axes can be addedX-axis and Z-axis; additional external axes (A-axis, C-axis) can be addedX-axis and double Z-axisX-axis, Y-axis, Z-axis
Maximum Y-axis span———12m
X-axis strokeCan be extended infinitelyAs seriesAs seriesCan be extended infinitely
Horizontal guide railsSIASUN rectangular guide rail with driving roller bearings on X-axis and Y-axisAs seriesAs seriesAs series
Beam-column connection—Clamping (upgraded from bolting connection)——
ConstructionStandardised modular unitsAs seriesAs seriesAs series

Specifications are as published by the manufacturer and are confirmed against the datasheet at quotation.

SIASUN has not published the dimensions, weight, repeatability, power requirements, control system model, communication interfaces, IP rating, operating temperature range or the contents of the delivery; these are confirmed at quotation.

What is the difference between the MGI, MGH and MGA?

The three versions share the modular construction and SIASUN guide rails, but they are arranged for different kinds of work. The MGI moves along the X-axis and Z-axis with loads from 1 to 1000 kg at up to 240 m/min. Its distinguishing points are the option of additional external axes, the A-axis and C-axis, and a beam-column connection that has been upgraded from bolting to clamping, which lets the structure adapt flexibly to the distance between the equipment already on site. The control system can also be selected to suit the customer’s usage habits.

The MGH carries the same load range and speed figure but runs along the X-axis with a double Z-axis. In truss automation generally, two vertical axes on one beam are chosen where a cell benefits from two lifting motions working side by side, for example when one station is loaded while another is unloaded.

The MGA is the heavy, area-covering member of the group. It moves along the X-axis, Y-axis and Z-axis, handles loads from 1 to 5000 kg and spans up to 12m on the Y-axis, while its X-axis stroke can be extended infinitely. Where the MGI and MGH work along a line, the MGA covers a rectangular floor area, which suits larger parts and wider layouts.

Why choose a modular truss robot over a fixed gantry?

A fixed gantry is designed once and then lives with that design. A modular truss robot treats the structure as a set of interchangeable parts. Because SIASUN builds every unit from standardised modules, a damaged or worn component can be replaced from the same catalogue, and the “parts supermarket” is set up to supply those modules whenever they are needed. The X-axis stroke can be extended infinitely, so a line that grows does not automatically require a new machine. On the MGI, clamped rather than bolted beam-column connections make it easier to fit the structure around existing equipment. For plants that expect their layout to change over the life of the investment, these are practical advantages rather than abstract ones, and SIASUN can customise a complete solution where the standard modules alone do not cover the task.

Who is the SIASUN Truss Robot for?

Machining plants that need to feed parts in and out of machine tools along a single line will usually start with the SIASUN MGI Truss Robot (MGI Truss Robot), particularly where rotary A-axis or C-axis motion would help to orient a part, or where clamped connections make fitting around existing machines simpler. Cells that call for two vertical motions on one beam are better served by the SIASUN MGH Truss Robot (MGH Truss Robot) with its double Z-axis.

Manufacturers handling heavy components across a wide area, such as large castings, fabricated structures or stacked loads, should look at the MGA, with its load range up to 5000 kg and Y-axis span of up to 12m. System integrators who build turnkey cells for their own clients will value the standardised modules and the availability of replacement parts, while production managers planning phased expansion benefit from an X-axis that can be lengthened as the line grows. Buyers comparing overhead handling with other automation can browse the Special Robots category for related SIASUN equipment.

What is the SIASUN Truss Robot used for?

  1. Machine tool tending: loading raw parts into machining centres and lathes and removing finished ones.
  2. Line transfer: moving workpieces between consecutive stations of a production line from overhead.
  3. Heavy part handling: lifting large, awkward components that are unsafe to move by hand.
  4. Palletising and stacking: placing parts or boxes in ordered layers on pallets or racks.
  5. Buffer and storage feeding: taking parts to and from intermediate storage between process steps.
  6. Assembly support: presenting components to assembly stations in the position the operation requires.

Pricing and Availability

Because each truss robot is configured from modules around a specific load, layout and axis arrangement, Robots Middle East prepares a quotation for every project rather than publishing a single figure. Share the parts you handle, the area to be covered and the machines involved, and we will propose the appropriate sub-series and configuration. Delivery, customs clearance and after-sales support are arranged together with the quotation. A request for a quotation for the SIASUN Truss Robot is available on this page.

Frequently Asked Questions

What loads can the SIASUN Truss Robot handle?

Across the M series, the standard load range is 1 to 5000 kg. The MGI and MGH each cover 1 to 1000 kg, while the MGA covers 1 to 5000 kg.

How fast does it move?

The series reaches a maximum speed of 240m/min along its axes. The MGI reaches 240 m/min along the X-axis and Z-axis, and the MGH along the X-axis and double Z-axis.

Can the X-axis be lengthened?

Yes. The X-axis stroke can be extended infinitely to meet user requirements, which allows the robot to follow the full length of a line.

Can rotary axes be added?

On the MGI, additional external axes, the A-axis and C-axis, can be added. Across the series, additional axes can be added beyond X, Y and Z.

Are replacement modules available?

The robots are built from standardised, interchangeable modules, and SIASUN’s “parts supermarket” can supply the modules customers require at any time. Robots Middle East coordinates such supply as part of its support.

How are the beams and columns of the MGI connected?

On the MGI, the connection between beams and columns has been upgraded from bolting to clamping. This lets the structure adapt flexibly to the distance between the equipment already installed on site.

Where can I buy the SIASUN Truss Robot and what does it cost?

You can buy it from Robots Middle East, which supplies it across the Middle East. The cost depends on the version and configuration, so we provide it in a tailored quotation requested through this page.

Summary

The SIASUN Truss Robot resolves the familiar choice between a standard machine that does not quite fit and a bespoke one that takes too long to arrive. Standardised modules, SIASUN’s rectangular guide rails, an X-axis that extends as far as the line requires and a parts supply designed for interchangeability turn a catalogue product into a tailored installation. The MGI, MGH and MGA then direct that flexibility towards linear tending, twin vertical motion or heavy area handling. For manufacturers in the Middle East who want overhead automation sized to their own floor, with Robots Middle East handling quotation, delivery and support, this page is the starting point.

Specifications

General

BRAND SIASUN
PART # Truss Robot

What's included

SIASUN Truss Robot (Truss Robot)

Product Questions

No questions yet. Be the first to ask.

0/255

Write a Review
You're reviewing: SIASUN Truss Robot
loader
Loading...

You submitted your review for moderation.