BMR MQ200 Facade Cleaning Robot

A fully automatic robot that works its way across the curtain walls of high-rise and ultra-high-rise towers, cleaning glass, metal and stone while its operator stays safely on the ground. Built around AI vision, a redundant safety system and wastewater recovery, it suits building owners and facade contractors who want routine cleaning without crews at height.

In stock

BRAND:
BMR
MODEL:
FACADE CLEANING ROBOT MQ200
ORIGIN:
China
Warranty:
12 MONTHS
AVAILABILITY:
ALLOW 8 TO 12 WEEKS FOR DELIVERY
SKU:
BMR-Facade-Cleaning-Robot
AED 292,495.66
Loading...
  • Buy 2 for AED 283,720.79 each and save 3%
  • Buy 5 for AED 272,020.97 each and save 7%
  • Buy 10 for AED 257,396.18 each and save 12%

BMR MQ200 Facade Cleaning Robot

Across the Gulf, glass towers stand in wind-blown dust and strong sun, and every cleaning cycle on their curtain walls traditionally means people suspended far above the street. Building owners have long rationed those cycles around crew availability, weather and risk. The BMR MQ200 Facade Cleaning Robot approaches the problem from a different direction. Instead of sending people up the facade, you send a fully automatic machine, and the operator keeps control from the ground. Designed for high-rise and ultra-high-rise buildings, it works across flat and large-curved glass, metal and stone curtain walls. It cleans a broad band of facade on each pass and collects its own wastewater, so the pavement below stays clean.

Robots Middle East supplies the BMR MQ200 Facade Cleaning Robot to building owners, facility management companies and facade maintenance contractors across the Middle East. Each quotation from Robots Middle East is prepared for the building and project concerned. Robots Middle East then arranges delivery and customs clearance and provides after-sales support once the robot is working on site.

Background

Shenzhen BrightMaster Robotics

The MQ200 is manufactured by Shenzhen BrightMaster Robotics Co., Ltd., which markets its machines under the BMR name. The company's range centres on the building site. Alongside the facade robot, BMR machines for coating, concrete levelling, concrete finishing and construction measuring appear in our Construction Robots category. The MQ200 carries that site-robotics thinking from the floor slab to the outside of the finished building, where maintenance continues for as long as the tower stands.

A three-part operating model

The MQ200 is built around three parts: ground-based manual control, autonomous high-altitude operation and AI intelligent detection. The aim is unmanned, intelligent and standardised curtain wall cleaning. Human decisions are taken at street level, the robot does the cleaning on the wall, and an AI vision system plans the cleaning path and assesses how clean the surface is. A redundant safety system reduces the risks of high-altitude operation, and a modular obstacle-crossing mechanism takes the robot past projections on the facade. An integrated wastewater recovery unit prevents secondary pollution of the surrounding environment.

Technical Specifications

SpecificationValue
Product typeFully automatic cleaning robot for high-rise and ultra-high-rise buildings
Construction scenariosFlat and large-curved glass, metal and stone curtain walls
Working height≤200m
Operating slope0-90°
Cleaning width1000 mm
Cleaning efficiency≥350 m²/h
Overall coverage rate≥80%
Moving speed0-0.2 m/s
Obstacle crossing height≤400 mm
Total weight≤ 80 kg
Operating voltage220V
Water supply methodSurface water supply
Protection levelIP 54
SafetyRedundant safety system; modular obstacle-crossing mechanism
VisionAI vision system for intelligent path planning and cleanliness assessment
WastewaterIntegrated wastewater recovery unit
ManufacturerShenzhen BrightMaster Robotics Co., Ltd.

Specifications are as published by the manufacturer and are confirmed against the datasheet at quotation.

The manufacturer has not published the dimensions, power consumption, water consumption, wastewater tank capacity, cable or rope length, noise level, control software and connectivity, or the contents of the box; these details are confirmed at quotation.

How does the MQ200 compare with rope-access facade cleaning?

Rope access and cradle systems depend on people working at height. Each cleaning cycle needs a trained crew, a safe weather window and careful supervision, and the quality of the result varies from one operative to the next. The MQ200 changes this arrangement. The operator controls the robot from the ground while it carries out the high-altitude work autonomously, so nobody needs to hang on the facade during routine cleaning.

The robot's capacity is clearly stated. It cleans at least 350 m²/h across a cleaning width of 1000 mm and moves at 0-0.2 m/s on a working height of up to 200m. Because the AI vision system both plans the path and assesses cleanliness, each cycle follows a defined route and is checked against a consistent standard rather than one person's judgement. This is what standardised cleaning means in practice. For a facility manager, it turns facade maintenance from an occasional, crew-dependent operation into a repeatable process that can be planned and recorded.

Run-off also matters. Conventional facade washing lets dirty water fall onto entrances, terraces and passers-by. The MQ200's integrated wastewater recovery unit prevents that secondary pollution of the surrounding environment. This counts for a great deal at hotels, shopping malls and office towers, where the ground floor stays open during cleaning.

Can the MQ200 clean curved and non-glass curtain walls?

Yes. The robot's construction scenarios are flat and large-curved glass, metal and stone curtain walls. That covers much of the material palette of contemporary towers in the region, from fully glazed offices to stone-clad residential buildings and metal-panelled mixed-use schemes. The operating slope of 0-90° means the robot can work on surfaces from horizontal to vertical, including sloping glazed roofs and inclined sections of a facade.

Facades are rarely smooth from top to bottom. Fins, ledges and decorative bands interrupt the surface, and the modular obstacle-crossing mechanism lets the MQ200 clear obstacles up to 400 mm high. Buyers should also note the overall coverage rate of at least 80%. This is an honest indication that a share of a complex facade may still need attention by other means, and it is worth assessing for the specific building when Robots Middle East prepares the quotation.

Who is the BMR MQ200 Facade Cleaning Robot for?

The first group is owners and developers of high-rise and ultra-high-rise towers who want regular, predictable facade cleaning without repeated rope-access campaigns. For them, the robot is part of the building's long-term maintenance equipment. The second group is facility management companies that run portfolios of commercial and residential towers. These buyers value a standardised process, and the AI cleanliness assessment supports consistent results across sites.

Specialist facade cleaning contractors form a third group. For them, the MQ200 adds an automated service to existing teams and reduces the amount of work their staff carry out at height. Operators of hotels, airport-adjacent towers and large public buildings may also find wastewater recovery decisive, because it allows cleaning to continue while the spaces below remain in use.

The MQ200 is built for tall curtain-wall buildings. Buyers whose needs lie in other areas, such as floors, interiors or lower structures, can explore the wider Cleaning Robots category, where Robots Middle East lists machines for other environments.

What is the BMR MQ200 Facade Cleaning Robot used for?

  1. Glass curtain wall cleaning – routine washing of fully glazed office and hotel towers up to the robot's working height.
  2. Curved facades – cleaning large-curved glass surfaces on landmark buildings with sculpted envelopes.
  3. Metal cladding – maintaining metal curtain wall panels on commercial and mixed-use buildings.
  4. Stone curtain walls – cleaning stone-clad facades on residential and institutional towers.
  5. Occupied sites – facade cleaning above entrances and terraces, with wastewater recovered rather than released to the street.
  6. Standardised maintenance programmes – replacing crew-dependent cleaning campaigns with a repeatable, AI-assessed process.

Pricing and Availability

Robots Middle East supplies the MQ200 on quotation, so the offer reflects your building, facade materials and maintenance programme. When you enquire, details such as building height, facade type and site access help us prepare an accurate proposal. Delivery, customs clearance and after-sales support are arranged together with the quotation. To begin, the quotation request for the BMR MQ200 Facade Cleaning Robot is available on this page.

Frequently Asked Questions

How high can the BMR MQ200 Facade Cleaning Robot work?

The robot works at heights of ≤200m. It is designed for high-rise and ultra-high-rise buildings.

Which facade materials can it clean?

Its construction scenarios are flat and large-curved glass, metal and stone curtain walls. It operates on slopes of 0-90°.

Does anyone need to work at height while the robot is cleaning?

The MQ200 follows a model of ground-based manual control and autonomous high-altitude operation. The operator therefore controls it from the ground while the robot works on the facade.

How does the robot judge whether the facade is clean?

An AI vision system plans the cleaning path and assesses cleanliness. This supports a consistent, standardised result from one cycle to the next.

What happens to the dirty water?

Water is supplied from the surface, and an integrated wastewater recovery unit prevents secondary pollution of the surrounding environment. Entrances and terraces below therefore stay clean during operation.

What power supply and protection level does it have?

The robot runs on 220V and carries a protection level of IP 54.

Where can I buy the BMR MQ200 Facade Cleaning Robot and what does it cost?

You can buy the BMR MQ200 Facade Cleaning Robot from Robots Middle East, which supplies it across the Middle East. The cost is set out in a quotation tailored to your project; you can request one from this page.

Summary

Dust, sun and height make facade cleaning in the region a constant task, and the traditional answer has been to send people up the wall more often. The BMR MQ200 Facade Cleaning Robot offers a different answer. The operator stays on the ground while the robot works autonomously at height on flat and large-curved glass, metal and stone curtain walls, with a redundant safety system protecting the operation. AI vision plans each route and checks the result, and integrated wastewater recovery keeps the surroundings clean. The result is facade maintenance that can be scheduled and repeated rather than rationed. Robots Middle East quotes, delivers and supports the robot throughout the region, and for owners and contractors ready to change how their towers are cleaned, this page is the starting point.

Specifications

–0.2 m/s
Max Speed

General

BRAND BMR
MODEL FACADE CLEANING ROBOT MQ200
ROBOT TYPE COMMERCIAL CLEANING ROBOT
ROBOT USE CLEANING, COMMERCIAL

Physical

WEIGHT ≤80 kg

Performance

MAXIMUM SPEED 0–0.2 m/s
SLOPE ANGLE 0–90°
STAIR CLIMBING HEIGHT ≤400 mm
INGRESS PROTECTION IP54

Battery + Power

INPUT VOLTAGE 220V

Source Details

RATED POWER Working height: ≤200 m. Water supply method: surface water supply. Overall coverage rate: ≥80%. Cleaning efficiency: ≥350 m²/h. Cleaning width: 1000 mm. Construction scenarios: flat and large-curved glass, metal and stone curtain walls.

Product Questions

No questions yet. Be the first to ask.

0/255

Downloads

BROCHURES
Write a Review
You're reviewing: BMR MQ200 Facade Cleaning Robot
loader
Loading...

You submitted your review for moderation.