BMR Floor Coating Robot

The BMR Floor Coating Robot brings semi-automated application to epoxy and resin floors, laying primer, intermediate coat and topcoat with interchangeable scraping and roll-coating tools. It is designed for car parks, workshops, laboratories and sports venues, where a uniform finish across wide floor areas makes the difference.

In stock

BRAND:
BMR
ORIGIN:
China
Warranty:
12 MONTHS
AVAILABILITY:
SUBJECT TO AVAILABILITY
SKU:
BMR-Floor-Coating-Robot

BMR Floor Coating Robot

Under the strip lights of an empty underground car park, a resin floor gives away every hesitation: the roller mark where one pass overlapped the next, the patch where a scraper lifted, the faint band where one operator handed over to another at the end of a shift. The BMR Floor Coating Robot is designed to take those hesitations out of the work. It carries a scraping or roll-coating tool across the slab in semi-automated operation, holding that tool against the floor so that primer, intermediate coat and topcoat are laid evenly over the whole area, whether the site is a parking structure, a factory workshop, a laboratory or a sports venue.

Robots Middle East supplies the BMR Floor Coating Robot to flooring contractors, developers and facility owners across the Middle East. Robots Middle East prepares each quotation, coordinates delivery to your project and provides support after handover, so your team deals with a single, accountable partner from the first enquiry to the first finished floor.

Background

Shenzhen BrightMaster Robotics and its construction focus

The BMR range is developed by Shenzhen BrightMaster Robotics Co., Ltd., a high-tech enterprise working in the intelligent construction sector. The company specialises in full-stack independent research and development of construction robots, and it also undertakes large-scale on-site deployment and full-lifecycle construction services. That combination matters to a buyer: the machine comes from a company whose business is not simply building robots but putting them to work on real construction sites, alongside related machines for surface preparation, screeding, levelling and wall coating.

The Floor Coating Robot sits within that family as the finishing machine for floors. Where other robots in the line prepare or form the slab, this one applies the coating system that the end user will actually walk, drive or work on.

Modular end tools and adaptive constant control

The key to the Floor Coating Robot 3800S is its modular design, which accepts both scraping and roll-coating end tools. Scraping suits coats that are spread and levelled across the surface, while roll coating suits thinner layers that are rolled on; a single platform that can carry either allows one machine to follow a floor system from primer through to topcoat.

BrightMaster pairs this modularity with dynamic adaptive constant control technology. Its purpose is to keep the end tool closely fitted to the floor under different working conditions, so that the coating remains uniform across the entire area rather than varying with the surface beneath it. For anyone who has inspected a coated floor under low-angle light, that consistency is the point of the whole machine.

Technical Specifications

SpecificationFloor Coating Robot 3800S
Dimensions (LxWxH)2580×1000×1700mm
Weight450kg (unloaded)
Maximum operating width3.2 m (scraping)/3.8 m (roll coating)
Material tank capacity32L
Battery capacityDC 48V&100 Ah
Rated power3.0kW
Charging sourceAC 220V / 16A
Operating endurance≥6h
Maximum moving speed0.7m/s
Maximum climbing angle12°
Maximum obstacle-crossing height50mm
Maximum trench-crossing width50mm

Specifications are as published by the manufacturer and are confirmed against the datasheet at quotation.

The manufacturer has not published the coating efficiency per hour, the IP rating, the navigation method, the control interface, the package contents or the noise level; Robots Middle East confirms these details with your quotation.

What makes the 3800S different from coating a floor by hand?

Manual floor coating depends on people walking the slab with squeegees, trowels and rollers, pass after pass, while the material's working time counts down. The quality of the result rises and falls with the stamina and technique of each operator. The Floor Coating Robot 3800S moves that repetitive application onto a machine that keeps its end tool pressed to the floor by means of adaptive constant control, so the coat is applied in the same way throughout the job.

Coverage per pass is generous: the maximum operating width is 3.2 m when scraping and 3.8 m when roll coating, and the machine carries its material in a 32L tank. Power comes from a DC 48V&100 Ah battery with a rated power of 3.0kW, giving an operating endurance of ≥6h, and recharging uses an AC 220V / 16A supply. In practice, that means the robot is not tethered to a power cable trailing across a freshly coated surface.

The operation remains semi-automated, and that is worth stating clearly. The robot takes on the physical application; your crew still plans the sequence, mixes and supplies the material and supervises the work. The gain is consistency and a reduced physical burden on the team, not the removal of skilled people from the site.

Can the 3800S move around a real job site?

Floors under construction are rarely perfect. Car parks have ramps, workshops have expansion joints and drainage channels, and laboratories have thresholds between rooms. The 3800S is specified for a maximum climbing angle of 12°, a maximum obstacle-crossing height of 50mm and a maximum trench-crossing width of 50mm, with a maximum moving speed of 0.7m/s.

At 2580×1000×1700mm and 450kg unloaded, it is a substantial machine, so access routes, lifts and door openings should be checked during planning. Robots Middle East reviews these points with you before quotation, so that the robot suits the site and not only the floor.

Who is the BMR Floor Coating Robot for?

The first audience is the specialist flooring contractor who lays epoxy, resin and other industrial floor systems and wants a more consistent finish across large areas. For such firms, a machine that handles primer, intermediate coat and topcoat on one platform makes it possible to standardise work across crews and projects.

General contractors and developers delivering underground parking garages, logistics buildings and factory workshops form the second group. These projects involve wide, open floor plates where a broad operating width and battery operation are most useful. Laboratory and sports-venue builders, where the finished floor is highly visible and uniformity is valued, make up a third.

The coating robot is only one stage of floor construction. Where your project also requires surface preparation before coating, the BMR Floor Grinding Robot 850S and the BMR Floor Grinding Robot 850M are the relevant machines to consider, and the BMR Floor Screeding Robot addresses the earlier screeding stage. The full selection is available among our Flooring Robots and the wider range of Construction Robots.

What is the BMR Floor Coating Robot used for?

  1. Underground parking garages: coating large car park decks where a uniform finish has to extend over very wide areas.
  2. Factory workshops: laying industrial floor coatings across production halls in a consistent, repeatable sequence.
  3. Laboratories: applying resin finishes where an even, continuous surface across the room is required.
  4. Sports venues: coating floor areas in which the finished surface is on display and visible flaws are not acceptable.
  5. Epoxy floor systems: carrying out primer, intermediate coat and topcoat with scraping or roll-coating tools as each layer requires.
  6. Resin and other floor finishes: handling floor finishing applications that call for scraping coating or roll coating processes.

Pricing and Availability

The BMR Floor Coating Robot is supplied on a quotation basis, so that the offer reflects your project, your coating system and the configuration of end tools you require. To begin, please share the floor areas, the coating types and the site conditions with Robots Middle East, and we shall prepare a tailored proposal.

Delivery, customs clearance and after-sales support are all arranged with your quotation. To start the process for your next floor coating project, please use the quotation request available on this page.

Frequently Asked Questions

Which coatings can the BMR Floor Coating Robot apply?

It can be used for epoxy floor coating, industrial floor coating, resin floor coating and other floor finishing applications that require scraping coating or roll coating processes.

Does it handle the whole coating sequence?

Yes. The 3800S is designed for semi-automated coating operations covering the full process of primer, intermediate coat and topcoat.

How wide is each working pass?

The maximum operating width is 3.2 m with the scraping tool and 3.8 m with the roll-coating tool.

How long can it operate on one charge?

Operating endurance is ≥6h from its DC 48V&100 Ah battery, and it charges from an AC 220V / 16A source.

Can it cross joints, channels and ramps?

The robot crosses obstacles up to 50mm high and trenches up to 50mm wide, and it climbs gradients of up to 12°.

Is the robot fully autonomous?

The machine is designed for semi-automated operation, so your crew still plans, supplies and supervises the work. The navigation method and the control interface have not been published and are confirmed with your quotation.

Where can I buy the BMR Floor Coating Robot and what does it cost?

You can purchase it from Robots Middle East, which supplies the robot across the Middle East. The price depends on your configuration and project, so please request a quotation through this page.

Summary

A coated floor is judged by its weakest metre, and under the lights of a car park, workshop or laboratory, that weakest metre is usually where human application faltered. The BMR Floor Coating Robot 3800S addresses this directly: modular scraping and roll-coating tools held to the floor by adaptive constant control, a broad operating width, battery operation for a full working shift and the ability to cross the joints and channels of a real site. Supplied, delivered and supported by Robots Middle East, it brings the consistency of a machine to the final layer of floor construction. For a floor that looks the same at the far wall as it does at the doorway, this page is the starting point.

Specifications

m/s
Max Speed
Runtime

General

BRAND BMR
ROBOT USE INDUSTRIAL

Physical

LENGTH 258.0 cm
WIDTH 100.0 cm
DEPTH 170.0 cm
WEIGHT 450 kg unloaded

Performance

MAXIMUM SPEED 0.7 m/s
SLOPE ANGLE 12°
STAIR CLIMBING HEIGHT 50 mm

Battery + Power

RUNTIME ≥6 h
BATTERY CAPACITY DC 48V / 100Ah
INPUT VOLTAGE AC 220V / 16A

Source Details

RATED POWER Rated power: 3.0 kW. Maximum operating width: 3.2 m scraping / 3.8 m roll coating. Material tank capacity: 32 L. Maximum trench-crossing width: 50 mm.

Product Questions

No questions yet. Be the first to ask.

0/255

Downloads

BROCHURES
Write a Review
You're reviewing: BMR Floor Coating Robot
loader
Loading...

You submitted your review for moderation.