BWSENSING Modbus Dual Axis Inclinometer (BWH527)

A compact, sealed dual-axis tilt sensor from BWSENSING that reports inclination over a Modbus serial link and is built for long-term monitoring work. It suits engineers who need angle data from towers, bridges, dams and track delivered straight into a PLC, data logger or SCADA system.

In stock

BRAND:
BWSENSING
PART #:
BWH527
ORIGIN:
China
AVAILABILITY:
SUBJECT TO AVAILABILITY
SKU:
BWSENSING-BWH527

BWSENSING Modbus Dual Axis Inclinometer (BWH527)

A surveyor's bubble vial tells you whether a surface is level, but only to the person standing in front of it. A tower, a bridge pier or a length of track needs a level that answers from a distance: one that sits sealed on the structure and replies with a precise angle whenever the control system asks. The BWSENSING Modbus Dual Axis Inclinometer (BWH527) is that kind of instrument. It is a compact, low-cost sensor that measures inclination on two axes and returns the reading over a Modbus serial link, so tilt becomes a value in a PLC register or on a SCADA screen rather than a bubble someone has to climb up and inspect.

Robots Middle East supplies the BWH527 to engineering contractors, asset owners, system integrators and research teams across the Middle East. We prepare each quotation for the interface variant your project requires. We also coordinate delivery to your site and provide technical support from selection through to commissioning.

Background

Wuxi Bewis Sensing Technology

The BWH527 is manufactured by Wuxi Bewis Sensing Technology LLC, based in Wuxi, Jiangsu, China, and sold under the BWSENSING brand. The company's catalogue focuses on inclination and attitude sensing. The BWH527 sits within a wider family of single-axis and dual-axis inclinometers that differ mainly in their output, communication protocol and positioning. Engineers who already use BWSENSING sensors elsewhere in a project will find the range easy to standardise on. You can browse the full family in our BWSensing collection.

Dual-axis measurement with Modbus output

The BWH527 is a low cost and small Modbus protocol output double-axes inclinometer. Each part of that description matters in the field. Measuring two axes means a single sensor captures both the pitch and the roll of whatever it is mounted on, so one device can show whether a structure is leaning and in which direction. Modbus output means the sensor joins an existing industrial network as a standard slave device. Data loggers, PLCs and SCADA platforms can poll it without bespoke drivers or analogue signal conditioning. The small size and low cost make it practical to deploy many units across a single asset, which is how monitoring programmes build a clear picture of slow movement over time.

Technical Specifications

SpecificationValue
Measuring axesDual axis
ProtocolModbus
Range±30°
Highest accuracy0.003°
Resolution0.0007°
Output interfaceRS232/RS485/TTL
Order codesBWH527-30-485 (RS485); BWH527-30-232 (RS232); BWH527-30-TTL (TTL)
Supply voltage9-36V
Current, no load20 mA min, 30 mA typical, 40 mA max
Baud rate2400~115200, adjustable
Output frequency5-100Hz adjustable, up to 100 Hz
Operating temperature-40℃~+85℃
Storage temperature-55 to 100 ℃
IP protection levelIP67
MTBF≥90000 hours
Impact resistance2000g, 0.5ms, 3 times/axis

Specifications are as published by the manufacturer and are confirmed against the datasheet at quotation.

The manufacturer has not published the weight, the box contents, the operating humidity, the cross-axis error for this series or the Modbus register map; we confirm these at quotation.

Which output should you choose: RS485, RS232 or TTL?

The BWH527 is offered in three interface variants, and choosing the right one is the most important decision when ordering. The BWH527-30-485 outputs over RS485, the physical layer most often paired with Modbus in industrial networks. RS485 is differential and supports multi-drop wiring, so several sensors can share one cable run back to a logger or PLC. That arrangement suits monitoring along a bridge deck, up a tower or across a dam crest.

The BWH527-30-232 provides RS232, which is useful where the sensor connects point-to-point to a single host, such as a test bench, a laptop during commissioning or legacy equipment that has an RS232 port. The BWH527-30-TTL provides a TTL-level serial output. It is intended for designers who connect the sensor directly to a microcontroller or an embedded board inside their own product, without a line driver in between.

On all three variants, the baud rate can be set between 2400 and 115200, and the output frequency between 5 and 100Hz. A slow, battery-conscious logging scheme and a faster control loop can therefore use the same hardware. If you are unsure which variant fits your architecture, Robots Middle East will review your wiring and host system before we quote.

What makes the BWH527 suited to long-term outdoor monitoring?

Monitoring sensors are installed once and expected to report for years, often in places that are difficult to reach. Several figures for the BWH527 address that requirement directly. The enclosure carries an IP67 protection level, which suits exposure to dust and water outdoors. The operating temperature range is -40℃~+85℃, and the storage range is -55 to 100 ℃. These figures matter in a region where equipment may wait in a container in summer heat before installation, or sit on exposed steel on a coastal or desert site.

The wide 9-36V supply input allows the sensor to run from common industrial and vehicle supply rails without a dedicated regulator. The no-load current of 30 mA typical keeps the power budget modest for solar-powered or remote stations. Reliability is expressed as an MTBF of ≥90000 hours. The rated impact resistance of 2000g, 0.5ms, 3 times/axis shows the sensor is built to withstand handling and mechanical shock. Taken together with a highest accuracy of 0.003° and a resolution of 0.0007°, these figures describe a sensor designed to detect small, slow changes in angle and to keep reporting them reliably.

Who is the BWSENSING Modbus Dual Axis Inclinometer (BWH527) for?

The BWH527 is aimed first at structural health monitoring. Contractors and consultants instrumenting bridges, dams and towers need many dependable tilt points at a sensible cost per point, and they need those points to report into a common data system. Wind farm operators and their service providers form a second group, because the sensor is built for wind tower tilt monitoring. Rail maintenance teams are a third, as the sensor is used for railroad gauge ruler levelling.

System integrators and OEMs make up the fourth group. The choice of RS485, RS232 or TTL output, the adjustable baud rate and the wide supply range make the sensor straightforward to build into machinery, platforms and custom monitoring panels. Research institutions running field trials will also find the Modbus interface convenient to log.

Buyers who want to compare other output options can review neighbouring BWSENSING models. These include the BWSENSING Cost-Effective Dual-Axis Digital Output With Modbus Inclinometer (BWN427), the single-axis BWSENSING Cost-Effective Single-Axis Digital Output With Modbus Inclinometer (BWM417) and, for CAN networks, the BWSENSING Cost-Effective Single-Axis CAN Output Inclinometer (BWM415). Robots Middle East can set out the differences on request, and the wider choice is listed under Sensors.

What is the BWSENSING Modbus Dual Axis Inclinometer (BWH527) used for?

  1. Wind tower tilt monitoring: tracking the lean of a tower on its foundation so that operators can see a trend before it becomes a fault.
  2. Bridge monitoring: recording the inclination of piers, decks and bearings over time as part of a structural health programme.
  3. Dam monitoring: observing the angular behaviour of dam structures alongside other geotechnical instruments.
  4. Railroad gauge ruler levelling: supplying the cross-level angle reading used when checking and levelling track.
  5. Equipment and platform levelling: giving a control system a live two-axis angle with which to level a machine or working platform.
  6. Remote data acquisition: feeding tilt values into PLC, data logger and SCADA systems over a standard Modbus link.

Pricing and Availability

Robots Middle East supplies the BWH527 by quotation. A quotation lets us confirm the interface variant and configuration that apply to your order before you commit. Delivery, customs and support are arranged together with the quotation, so you receive a single, complete proposal for your site. To begin, tell us the variant you need, the quantity and the system the sensor will connect to, and request a quotation through the form available on this page.

Frequently Asked Questions

What range does the BWH527 measure?

The BWH527 measures inclination over a range of ±30° on each of its two axes.

Which communication interfaces are available?

The sensor is available with RS485, RS232 or TTL output, under the order codes BWH527-30-485, BWH527-30-232 and BWH527-30-TTL. Each variant communicates using the Modbus protocol.

What accuracy and resolution does it offer?

The BWH527 has a highest accuracy of 0.003° and a resolution of 0.0007°.

Can the sensor be installed outdoors?

Yes. The enclosure carries an IP67 protection level, and the operating temperature range is -40℃~+85℃.

What power supply does it require?

It accepts a supply of 9-36V and draws 30 mA typical with no load, within a range of 20 to 40 mA.

Is the Modbus register map available?

Robots Middle East works through the register details with your integrator as part of the quotation, so that the host configuration can be planned before delivery.

Where can I buy the BWSENSING Modbus Dual Axis Inclinometer (BWH527) and what does it cost?

You can buy it from Robots Middle East, which supplies it across the Middle East. The cost depends on the variant, quantity and delivery arrangements, so please request a quotation on this page.

Summary

The BWH527 takes the function of the bubble vial and makes it work at a distance. Instead of an angle that someone must read in person, it returns two axes of inclination as Modbus data that a control room can poll, log and trend. Its figures support long-term field use: a ±30° range, 0.003° highest accuracy, 0.0007° resolution, IP67 protection, a 9-36V supply and a choice of RS485, RS232 or TTL output. These make it a practical tilt point for towers, bridges, dams, track and machinery. Robots Middle East will help you choose the right variant, settle the remaining integration details and arrange delivery and support. For your next tilt monitoring project, this page is the starting point.

Specifications

General

BRAND BWSENSING
PART # BWH527

What's included

BWSENSING Modbus Dual Axis Inclinometer (BWH527)

Product Questions

No questions yet. Be the first to ask.

0/255

Write a Review
You're reviewing: BWSENSING Modbus Dual Axis Inclinometer (BWH527)
loader
Loading...

You submitted your review for moderation.