SIASUN SR25A-35-1.80 (SR25A-35/1.80)
In stock
- BRAND:
- SIASUN
- PART #:
- SR25A-35/1.80
- ORIGIN:
- China
- AVAILABILITY:
- FOR OPPORTUNITIES OVER 1 MILLION USD
- SKU:
- SIASUN-SR25A-35/1.80
SIASUN SR25A-35-1.80 (SR25A-35/1.80)
Watch a welding cell for an hour and the robot is seldom the weak point; the cable package is. Hoses catch on fixtures, the wire conduit twists as the wrist rotates, and the feed falters just as the torch reaches the far side of the part. The SIASUN SR25A-35-1.80 (SR25A-35/1.80) addresses that problem from the wrist outwards. Its J4 to J6 axes follow a hollow concept, its wire feeder is integrated, and it carries a payload of 35 kg (77.2 lbs) across a reach of 1803mm. It is an arm for plants that want their tooling to move with the robot rather than against it.
Robots Middle East supplies the SR25A-35/1.80 to manufacturers, system integrators and technical institutions across the Middle East. Robots Middle East prepares each quotation, coordinates delivery to your facility and remains your point of contact for technical support once the arm is in production, so that a single partner is accountable from the first enquiry onwards.
Background
SIASUN and its engineering lineage
SIASUN Robot & Automation is a Chinese robotics manufacturer based in Shenyang, with roots in the Shenyang Institute of Automation of the Chinese Academy of Sciences. Its portfolio spans articulated industrial arms, mobile robots and complete automation lines, and its SR series of industrial robots runs from compact arms for light assembly up to heavy-payload machines for large components. The SR25A family sits in the small-payload part of that range, where most welding, handling and finishing work in general manufacturing takes place.
An upgraded 20 kg-class design
The SR25A-35/1.80 is an upgraded iteration of SIASUN's 20 kg-class product, developed to expand the range of application fields the platform can serve. Rather than starting again, SIASUN refined an established design: the arm is produced by a special casting process using automotive engine-grade aluminium alloy, which gives it a lightweight construction, and the wrist was reworked around hollow J4 to J6 axes. The outcome is a machine that keeps the footprint logic of a mid-sized arm while handling the heavier torches, grippers and finishing tools that modern cells increasingly demand.
Technical Specifications
| Specification | Value |
|---|---|
| Payload | 35 kg (77.2 lbs) |
| Reach | 1803mm |
| Repeatability | ±0.05mm |
| Protection (wrist) | IP65 |
| J5/J6 motion range | ±180° |
Specifications are given as the manufacturer publishes them and are confirmed against the datasheet at quotation.
SIASUN has not published the robot's weight, power supply, controller model, axis speeds, operating temperature, mounting dimensions, communication interfaces or the contents of the delivery, and Robots Middle East confirms these details with each quotation.
What does a hollow wrist change in a welding or finishing cell?
On a conventional wrist, the cables and hoses serving the tool run along the outside of the arm. Every rotation of the forearm and wrist drags that bundle with it, and in a tight cell the bundle becomes the first thing to strike a clamp, a fixture or the workpiece itself. On the SR25A-35/1.80, the J4 to J6 axis design follows the hollow concept, which prevents this kind of interference and makes the cell layout easier to arrange. Programmers have fewer collision zones to work around, and fixtures can sit closer to the robot.
The wrist geometry reinforces the point. The J5 and J6 axes each offer a motion range of ±180°, so the tool can be presented to a joint or surface from a wide choice of angles without the arm having to reposition itself. For welding, this matters most on parts with seams that wrap around corners or run on the underside of an assembly.
The integrated wire feeder completes the picture. Integrating the feeder improves both the stability of wire feeding and the efficiency of the operation, which is precisely where external cable packages tend to cause stoppages. Combined with an IP65-rated wrist, the arm is prepared for the spatter, dust and coolant that accompany welding and grinding work.
How does the SR25A-35/1.80 build on its 20 kg-class predecessor?
The predecessor platform established the basic architecture; the SR25A-35/1.80 extends what that architecture can be asked to do. With a payload of 35 kg (77.2 lbs), the arm has headroom for heavier welding torches with collision sensors, for dual grippers in handling tasks and for force-controlled finishing tools that would strain a lighter arm. A reach of 1803mm allows it to serve several fixtures or a turntable from one position, and a repeatability of ±0.05mm keeps each return to a programmed point consistent across a long shift.
Maintenance has also been considered. Each joint carries its own zero-position calibration groove, so that a technician can restore precise zero-position alignment with a dedicated tool. After a collision, a motor replacement or a relocation of the cell, this shortens the time needed to bring the robot back to its programmed accuracy. For finishing work, SIASUN also offers an SR25A-35/1.80 kit system with a single-head force-controlled tool for light-duty grinding applications, turning the arm into a ready-defined starting point for surface treatment.
Who is the SIASUN SR25A-35-1.80 (SR25A-35/1.80) for?
The arm suits fabricators and metalworking firms that weld structural parts, frames and brackets, and who want an integrated wire feeder and a clean wrist rather than an external cable package. Automotive and component suppliers will find the combination of reach and repeatability useful for servicing multiple fixtures from one robot. Foundries and finishing shops can consider the grinding kit system for light-duty surface work, and system integrators in the region gain an arm with a broad application scope that can be redeployed as a customer's needs change.
Where the tooling is lighter, the same family offers alternatives worth comparing, including the SIASUN Industrial Robot Arm (SR25A-25/1.80) and the SIASUN SR25A-12/2.01. For heavier loads, a larger SIASUN model such as the SIASUN Industrial Robot Arm (SR50A-50/2.15) may be the better match. Buyers whose priority is a complete finishing cell may also wish to review the SIASUN Polishing Expert System, and the full range of comparable arms is listed under Small Payload.
What is the SIASUN SR25A-35-1.80 (SR25A-35/1.80) used for?
- Arc welding: the integrated wire feeder and hollow wrist suit continuous seam welding on frames, brackets and assemblies.
- Light-duty grinding: the kit system with a single-head force-controlled tool supports surface finishing of cast and machined parts.
- Material handling: the payload allows heavier grippers and parts to be moved between conveyors, fixtures and racks.
- Machine tending: an arm of this class typically loads and unloads machine tools, presses and moulding machines.
- Assembly: repeatable positioning helps with placing, fastening and joining components in a fixed sequence.
- Multi-station cells: the reach lets one robot serve several fixtures or a positioner from a single mounting point.
Pricing and Availability
Robots Middle East quotes each SR25A-35/1.80 according to the configuration you require, whether that is a stand-alone arm, a welding setup or the grinding kit system. Send us details of your application, the parts you intend to process and your site requirements, and our team will prepare a quotation tailored to your project. Delivery, customs clearance and technical support are arranged together with the quotation. To begin, use the quotation request available on this page.
Frequently Asked Questions
What payload can the SR25A-35/1.80 carry?
The arm is rated for a payload of 35 kg (77.2 lbs). This leaves room for heavier welding torches, grippers and finishing tools.
What are its reach and repeatability?
The SR25A-35/1.80 has a reach of 1803mm and a repeatability of ±0.05mm.
Is the wrist protected against dust and liquids?
Yes, the wrist carries an IP65 protection rating, which suits environments with dust, spatter or coolant.
Is the arm suitable for welding?
It is well prepared for welding: the wire feeder is integrated for stable feeding, and the hollow J4 to J6 axes keep the cable routing clear of fixtures and parts.
Is there a grinding configuration?
SIASUN offers an SR25A-35/1.80 kit system with a single-head force-controlled tool intended for light-duty grinding applications.
How is the robot's zero position restored after maintenance?
Each joint has a dedicated zero-position calibration groove, and a technician uses a dedicated tool to achieve precise alignment. This shortens recovery after repairs or relocation.
Where can I buy the SIASUN SR25A-35-1.80 (SR25A-35/1.80) and what does it cost?
You can obtain the SR25A-35/1.80 from Robots Middle East, which supplies customers across the Middle East. The cost depends on the configuration and project scope, so please request a quotation and our team will respond with an offer for your application.
Summary
The SR25A-35/1.80 is built on a simple observation: in welding and finishing cells, it is often the tooling and its cables, not the arm, that limit what a robot can do. SIASUN answered with a hollow J4 to J6 wrist, an integrated wire feeder, a wide ±180° range on J5 and J6 and a lightweight cast aluminium structure, all carried forward from a proven 20 kg-class design and extended to a payload of 35 kg (77.2 lbs) and a reach of 1803mm. Calibration grooves on every joint keep it accurate through its service life, and the grinding kit system opens a path into surface finishing. If you are planning a cell where the torch, the cables and the robot must work as one, this page is the starting point.