SIASUN Sheet Metal Welding Machine Set

A matched robotic welding set from SIASUN that unites an SR-series robot, digital welding equipment and a dedicated process for joining thin carbon steel with minimal spatter and distortion. Robots Middle East supplies it to fabricators across the region who want clean, repeatable seams on sheet metal parts without lengthy post-weld finishing.

In stock

BRAND:
SIASUN
PART #:
Sheet Metal Welding Machine Set
ORIGIN:
China
AVAILABILITY:
FOR OPPORTUNITIES OVER 1 MILLION USD
SKU:
SIASUN-Sheet-Metal-Welding-Machine-Set

SIASUN Sheet Metal Welding Machine Set

A robotic welding cell is often built from three separate purchases: a robot from one supplier, a power source from another and a process package that someone on the shop floor has to make work with both. Every joint between those systems is a place where tuning time disappears and weld quality drifts. The SIASUN Sheet Metal Welding Machine Set starts from the opposite premise. The robot, the welding equipment and the welding process are specified together and matched to one task: joining thin carbon steel sheet with as little spatter and distortion as possible.

Robots Middle East sells the SIASUN Sheet Metal Welding Machine Set and supplies it to manufacturers and fabricators across the Middle East. Robots Middle East prepares the quotation, confirms the configuration against the manufacturer's datasheet, arranges delivery to your facility and remains your point of contact for support once the set is in production.

Background

SIASUN and the SR-series robots

SIASUN builds its own industrial robots, and this set is centred on the company's independently developed SR-series. Building the set around an in-house robot family means the manufacturer controls the motion platform that carries the torch, rather than adapting a third-party arm to its welding process. SIASUN also maintains an international presence, with overseas branches and regional hubs in Singapore, Thailand, Malaysia, Germany, Mexico, Japan and beyond. For buyers in the Middle East, this reflects a manufacturer that already serves industrial customers across several continents.

One platform, three systems

SIASUN describes the set as a trinity: the robot, the welding system and the process system brought together on an intelligent robotics platform. Alongside the SR-series robot sits a next-generation intelligent welding control system and digital welding equipment. The welding machines named for the set are the MEGMEET Dex2 350LDR and the Aotai NBC350RL. The torches named are the Loyee GL350N-HDA and the TRM 352P. Within the SIASUN welding range, this set is the sheet metal version; its counterpart for heavier work is the Medium and Thick Plate Welding Machine Set.

Technical Specifications

SpecificationValue
Robot typeSR12A-12/1.46, SR25A-12/2.01
Welding machineMEGMEET Dex2 350LDR, Aotai NBC350RL
Welding torchLoyee GL350N-HDA, TRM 352P
Standard functionsFlying Welding, Continuous Spot Welding, Rotational Mirror Translation, Reservation Function, Breakpoint Recovery Feature
Optional functionsSeam Finding Function, Weld Seam Tracking, Multi-Pass Welding Capabilities
Ultra-low spatter welding rangeCarbon steel sheets from 1 to 3mm thick
Spatter reduction60%
Heat input adjustmentDecreased by 10%-20%
High-frequency hardware system110kHz, with proprietary algorithms for precise chopping control
Control systemAll-digital control of the arc and droplet
Inverter technologySoft-switching inverter

Specifications are as published by the manufacturer and are confirmed against the datasheet at quotation.

The manufacturer has not published the rated output current of the welding power source, the rated input power, the weight or dimensions of the set, the robot's payload, repeatability or reach for this set, the IP rating, the contents of the delivery or the wire feeding speed; Robots Middle East confirms these at quotation.

How does the set keep spatter down on thin sheet?

On thin material, spatter and heat cause the most trouble. SIASUN addresses both at the level of the power electronics. A 110kHz high-frequency hardware system works with proprietary algorithms to give precise chopping control of the current. This targets the two mechanisms behind much of the spatter in short-arc welding: the rupture of the liquid bridge between wire and pool, and electromagnetic repulsion of the droplet. SIASUN states that spatter is reduced by 60%.

The second lever is heat. The all-digital control system governs the arc and the droplet closely enough to stabilise the weld pool, and heat input can be finely adjusted, decreased by 10%-20%. On carbon steel sheet from 1 to 3mm thick, the set achieves ultra-low spatter welding. The manufacturer presents this as making thin sheet work manageable with minimal distortion. The soft-switching inverter supports equipment reliability and energy efficiency, which matters to a cell expected to run shift after shift.

The practical consequence is that less effort is spent after the weld. With less spatter there is less cleaning, and with less distortion there is less straightening. For parts with visible surfaces, that can decide whether a component goes straight to painting or back to a finishing bench.

What makes the Sheet Metal set different from the Medium and Thick Plate set?

The two versions divide the work by material thickness. The Sheet Metal Welding Machine Set is the one whose published process figures concern thin carbon steel: the ultra-low spatter range of 1 to 3mm, the spatter reduction and the finely adjustable heat input. Its standard functions suit the repetitive, high-count joints typical of sheet fabrication. Flying Welding and Continuous Spot Welding speed up runs of short seams and tack points. Rotational Mirror Translation helps reuse programmes on mirrored or rotated parts. The Reservation Function and Breakpoint Recovery Feature keep production organised and allow an interrupted weld to resume.

The SIASUN Medium And Thick Plate Welding Machine Set is named for heavier sections. Its figures are not part of this page, and none of the values above should be read across to it. If your parts are mainly heavier plate, its own datasheet is the right comparison. On the sheet metal set, the optional Multi-Pass Welding Capabilities, Seam Finding Function and Weld Seam Tracking extend the cell when fit-up varies or a joint needs more than one pass.

Who is the SIASUN Sheet Metal Welding Machine Set for?

The set is aimed first at fabricators whose output is dominated by thin carbon steel parts, such as enclosures, cabinets, housings, brackets and light frames, where distortion and post-weld cleaning drive cost. Contract manufacturers moving from manual MIG/MAG welding to robotic production will benefit from a set in which the robot, power source and process are already matched, as this shortens the path from installation to stable output. Production engineers who already run robots but struggle with spatter on thin gauges will find the high-frequency control and adjustable heat input the most relevant features.

Some buyers will be better served elsewhere in the range. Workshops welding mainly heavier sections should look at the Medium and Thick Plate version. Companies that want to reduce programming effort on varied, low-volume parts may compare the SIASUN Teach-Free Welding Robot. Projects that call for laser joining rather than arc welding are covered by the SIASUN Laser Welding Production Line. The wider choice is set out in our Welding Robots category.

What is the SIASUN Sheet Metal Welding Machine Set used for?

  1. Electrical enclosures and cabinets — welding thin carbon steel panels where visible surfaces must stay clean.
  2. Machine guards and housings — repeatable seams on formed sheet parts made in batches.
  3. Brackets and light frames — short seams and tack points suited to continuous spot welding.
  4. Mirrored part families — reusing a programme for left- and right-hand parts through rotational mirror translation.
  5. HVAC and ventilation components — joining thin steel ducts and casings with limited distortion.
  6. Replacing manual thin-sheet welding — moving repetitive MIG/MAG work onto a robot to steady quality between shifts.

Pricing and Availability

The SIASUN Sheet Metal Welding Machine Set is supplied on quotation, because the choice of robot type, welding machine, torch and optional functions depends on your parts and production targets. Robots Middle East reviews your application, confirms the configuration against the manufacturer's datasheet and prepares a quotation for that specification. Delivery, customs and support are arranged with the quotation. To begin, send us your part drawings or a description of the welding task using the quotation request available on this page.

Frequently Asked Questions

Which robots are used in the set?

The set is centred on SIASUN's SR-series robots, and the robot types named are the SR12A-12/1.46 and the SR25A-12/2.01. The right choice for your parts is agreed during quotation.

Which welding machines and torches are included?

The welding machines named are the MEGMEET Dex2 350LDR and the Aotai NBC350RL, and the torches named are the Loyee GL350N-HDA and the TRM 352P. The exact combination is confirmed in your quotation.

What sheet thickness is the set designed for?

It achieves ultra-low spatter welding on carbon steel sheets from 1 to 3mm thick. For heavier sections, the Medium and Thick Plate version is the relevant set.

How much does it reduce spatter?

SIASUN states that spatter is reduced by 60%, and heat input can be decreased by 10%-20%. This comes from the 110kHz high-frequency hardware system and the all-digital arc and droplet control.

Can it follow seams that vary from part to part?

The Seam Finding Function and Weld Seam Tracking are available as options, as are Multi-Pass Welding Capabilities. They can be specified when you request a quotation.

What happens if a weld is interrupted?

The Breakpoint Recovery Feature is a standard function, so an interrupted weld can be resumed from the breakpoint rather than restarted.

Where can I buy the SIASUN Sheet Metal Welding Machine Set and what does it cost?

You can buy it from Robots Middle East, which supplies the set across the Middle East. The cost depends on the configuration you choose, so we prepare a quotation after reviewing your application.

Summary

The SIASUN Sheet Metal Welding Machine Set removes the gaps that usually separate a robot, a power source and a welding process. SIASUN's own SR-series robot, a matched digital welding machine and torch, and a process built on 110kHz chopping control and all-digital arc management form one system aimed at thin carbon steel. The published results are ultra-low spatter welding from 1 to 3mm, a 60% reduction in spatter and heat input lowered by 10%-20%, which together mean less cleaning and less distortion after welding. For a configuration confirmed against the datasheet and supplied, delivered and supported by Robots Middle East, this page is the starting point.

Specifications

General

BRAND SIASUN
PART # Sheet Metal Welding Machine Set
ROBOT USE WELDING

What's included

SIASUN Sheet Metal Welding Machine Set (Sheet Metal Welding Machine Set)

Product Questions

No questions yet. Be the first to ask.

0/255

Write a Review
You're reviewing: SIASUN Sheet Metal Welding Machine Set
loader
Loading...

You submitted your review for moderation.