Unitree G1-D Ultimate A U6 Wheel Base Dual-Arm Humanoid Robot

The Unitree G1-D Ultimate A U6 is a dual-arm manipulation platform — two 7-DOF arms and a waist on a telescoping column on a dual-wheel base reaching 1.5 m/s — with dex1-1 two-finger gripper and 21 degrees of freedom. It does not walk; for a bipedal humanoid see the Unitree G1.

متوفر

ماركة:
UNITREE ROBOTICS
نموذج:
U6
الجزء #:
G1-D-U6
ORIGIN:
الصين
Warranty:
12 MONTHS
AVAILABILITY:
SUBJECT TO AVAILABILITY
SKU:
Unitree-G1-D-U6
١٩٦٬٣٢١٫٠٥ د.إ.‏
شحن مجاني
جارٍ التحميل...

Unitree G1-D Ultimate A U6 Wheel Base Dual-Arm Humanoid Robot

A two-finger gripper is the end effector most manipulation research actually needs. It closes on a thing and holds it, repeatably, for thousands of cycles — and it is the reason this is the least expensive way into a serious dual-arm platform.

What it is

The Unitree G1-D Ultimate A U6 is a dual-arm manipulation platform: two 7-DOF arms and a waist on a telescoping column, mounted on a wheel base, fitted with a Dex1-1 two-finger parallel gripper on each arm. Total freedom reaches 21 degrees. It is sold as a development platform with documented interfaces rather than as a closed product.

This is not a legged humanoid

The naming invites confusion, so it is worth being blunt. The Unitree G1 is a bipedal robot that walks. The G1-D is a dual-arm manipulation platform: two 7-DOF arms and a waist mounted on a telescoping column, which either stands on a fixed base or rides on a wheeled one. It does not walk, and it is not trying to. What it does instead is hold a stable, repeatable working posture at any height between roughly 1.26 and 1.68 metres, which is precisely what bimanual manipulation research needs and precisely what a walking robot struggles to give you.

If your work is locomotion, balance or whole-body control, buy a G1. If your work is grasping, bimanual coordination, teleoperation or collecting demonstration data for robot learning, the G1-D is the better platform and usually the cheaper one.

Two decisions: the base and the hands

Every G1-D is one of two bases crossed with one of five hand options. Ten SKUs, two decisions. Get the axes straight and the range stops being confusing.

TierBaseCore DOF (excluding hands)MobilityCodes
StandardFixed base17Stationary — column lifts, base does not moveU1–U5
UltimateWheel base19Dual-wheel differential drive, up to 1.5 m/s, with navigation sensorsU6–U10

The core 17 degrees of freedom are the same in both: 7 per arm, 2 in the waist and 1 in the lifting column. The Ultimate tier adds 2 for the drive wheels. Hands are then added on top.

LetterHandsDOF per handTactile sensingFixed baseWheel base
ADex1-1 two-finger gripper1NoU1U6
BDex3-1 three-finger, force controlled7NoU2U7
CDex3-1 three-finger, force controlled7YesU3U8
DBrainCo Revo 2, five fingers6NoU4U9
EBrainCo Revo 2 Tactile, five fingers6YesU5U10

The wheel base carries a consistent premium over the fixed base across every hand option, so the two decisions price independently. Choose the base from whether the robot needs to travel, and the hands from what it needs to hold.

Where this configuration sits

The U6 is the Ultimate tier — wheel base — with the A hand option. Its direct counterpart is the U1 Standard A, which is the identical robot on the other base. If the robot does not need to travel between workstations, that fixed-base version does the same manipulation work for appreciably less. Within this tier the other hand options are the U7 Ultimate B, U8 Ultimate C and the rest of the G1-D range.

Unitree G1-D Ultimate A U6 specifications

SpecificationValue
TierUltimate — wheel base
Total degrees of freedom21 (19 core + 1 per hand)
HandsDex1-1 two-finger gripper
Tactile sensingNone
MobilityDual-wheel differential drive, up to 1.5 m/s, with navigation sensors
ArmsTwo arms, 7 DOF each
Payload3 kg per arm
Arm reach0.45 m
Height range1,260 – 1,680 mm (telescoping column)
Maximum working heightAbout 2 m
Lifting stroke500 mm
Lifting speed60 mm/s
Battery lifeUp to about 6 hours

Figures follow published specifications for this configuration and vary by production batch. Confirm the exact build on your quotation before ordering.

Who buys it

  • Bimanual manipulation research using simple, robust end effectors
  • Pick-and-place development and industrial process prototyping
  • Teaching programmes where grippers survive student use
  • Groups collecting demonstration data at volume
  • Buyers who want the platform now and better hands later

How to choose

Buy the U6 if you need a Dex1-1 two-finger parallel gripper on each arm and the robot must travel. Switch base with the U1 and nothing else changes. Move up to three-finger dexterity with the B option or five fingers with the D option. Compare the whole field in our humanoid robots category.

Safety and standards

The G1-D is research and development equipment. The industrial robot safety standards — ISO 10218 and the ANSI/RIA R15.06 family — and the mobile robot standard R15.08 do not cover it, so the duty of care sits with the operator. Define and mark a working area, keep untrained people outside it, keep a trained operator with the emergency stop within reach, and complete a written risk assessment before any public demonstration. Two arms moving 3 kg each at head height deserve the same respect you would give any industrial manipulator.

Lithium batteries are regulated dangerous goods in transit, which affects how spares ship and how quickly.

Deployment and running costs

A wheeled platform also needs floor space to work in and reasonably flat, clear ground to drive on. Battery endurance of around six hours means most labs run a full day without a swap, which is a real advantage over legged humanoids. Budget for mounting or siting, the working-area arrangements above, and any end-effector spares — hands are the most frequently damaged part of any manipulation platform. Related parts are listed under robot accessories. International buyers should add duty and import charges. Current pricing is shown on the listing above; for quantities, grant purchases or bundles, request a written quotation.

Import and delivery

Units ship from the manufacturer and lead times follow production batches rather than a fixed schedule. Lithium batteries restrict some routes and add documentation, and this is a heavy, bulky crate. Tell us the destination country when you enquire and we will confirm delivered cost, a realistic lead time and the paperwork required before you commit.

Support before and after the sale

Before you buy, our team will confirm whether a two-finger gripper covers your intended work, and what it would cost to move to dexterous hands later. We will also check the base decision with you, because moving between fixed and wheeled after delivery is not a cheap correction. After delivery, we help with training, set up and ongoing support. The specifics for your order are confirmed on your quotation.

Where to buy

This configuration is listed above with current price and availability, alongside the rest of the G1-D range so you can compare before committing. Order directly, or contact our team for a formal quotation including delivery to your country. Universities and institutions buying against a purchase order should request a written quotation first.

Frequently asked questions

How much does a Unitree G1-D Ultimate A U6 cost?

Current pricing is shown on the listing above. Request a quotation for delivered pricing or quantities.

What is the difference between the U6 and the U1?

The hands are identical. The U6 has the wheel base; the U1 has the fixed base.

What is the difference between Standard and Ultimate?

Standard is a fixed base; Ultimate adds a dual-wheel differential drive base reaching 1.5 m/s, with navigation sensors, and 2 extra degrees of freedom.

What hands does the U6 have?

Dex1-1 two-finger gripper, 1 degrees of freedom per hand, without tactile sensing.

Can I change the hands later?

Yes. End effectors are sold separately and can be changed, though specifying correctly at order saves cost and downtime.

How many degrees of freedom does it have?

21 in total: 19 in the core body — 7 per arm, 2 in the waist, 1 in the column, 2 for the drive wheels — plus 1 per hand.

How fast does it drive?

Up to 1.5 m/s on the dual-wheel differential drive base, which also carries dedicated navigation sensors.

Does the G1-D walk?

No. It is a dual-arm manipulation platform on a telescoping column, with either a fixed base or a wheeled one. For a walking humanoid, see the Unitree G1.

How long does the battery last?

Up to about six hours, which is enough for most labs to work a full day without a swap.

How much can each arm lift?

3 kg per arm, at an arm reach of 0.45 m.

How high can it reach?

The column lifts the torso between about 1.26 and 1.68 m, giving a maximum working height of roughly 2 m.

Do you ship internationally?

Yes. Lithium batteries and crate size both affect routing and lead time, so confirm the destination country when you enquire.

المواصفات

General

ماركة UNITREE ROBOTICS
نموذج U6
الجزء # G1-D-U6
نوع الروبوت ذات العجلات البشرية
استخدام الروبوت التعليم, صناعية, بحث
FCC APPROVED Yes
FCC ID 2A5PE-YUSHU008

أسئلة حول المنتج

لا توجد أسئلة بعد. كن أول من يسأل.

0/255

اكتب مراجعة
أنت تراجع: Unitree G1-D Ultimate A U6 Wheel Base Dual-Arm Humanoid Robot
loader
جارٍ التحميل...

لقد أرسلت مراجعتك للإشراف عليها.