BMR Intelligent Construction Hoist

A construction hoist that behaves like a scheduled lift: it opens its own landing doors, answers calls from the floors and the cage, and carries construction robots between levels through a vertical logistics scheduling system. It serves smart building projects where materials and robots share one vertical route, with safety supervision across the equipment's working life.

In stock

BRAND:
BMR
MODEL:
SC200/200ZA
ORIGIN:
China
Warranty:
12 MONTHS
AVAILABILITY:
SUBJECT TO AVAILABILITY
SKU:
BMR-Intelligent-Construction-Hoist

BMR Intelligent Construction Hoist

On a busy airport apron, aircraft do not move on instinct. A control tower decides which one goes where and when, and the whole operation flows because every movement is scheduled. A high-rise construction site has its own apron stood on end: the mast and cages that link the ground to every working floor. Yet on many projects that vertical traffic is still coordinated by radio calls, waiting and judgement at the landing gate. The BMR Intelligent Construction Hoist brings the control-tower idea to vertical transport. It has automatic landing doors, responds to calls from the floors and to selections made inside the cage, and is integrated with a vertical logistics scheduling system. Together these make the hoist a dispatched node in the site's logistics rather than a machine that merely goes up and down, and that node can serve construction robots as readily as it serves loads of material.

Robots Middle East supplies the BMR Intelligent Construction Hoist to general contractors, developers, and rental and engineering service providers across the Middle East. Robots Middle East prepares each quotation for the SC200/200ZA configuration, coordinates delivery to the project, and remains the point of contact for support once the hoist is installed on site.

Background

Shenzhen BrightMaster Robotics and its construction focus

The hoist is made by Shenzhen BrightMaster Robotics Co., Ltd., which trades under the BMR brand. It is a high-tech enterprise in the intelligent construction sector, and its work covers three areas: full-stack independent research and development of construction robots, large-scale on-site deployment, and full-lifecycle construction services. That background matters when judging a hoist. A company that builds the robots and also deploys them on real sites meets the practical question of how a machine reaches the twentieth floor every day. The intelligent hoist answers that question from within the same organisation, and the wider range is collected on the BrightMaster page.

A hoist positioned as part of the robotic site

Construction hoists are a familiar sight on any multi-storey project. They are the temporary lift that carries materials and equipment until the permanent lifts are commissioned. This product is designed for smart building system projects, where site equipment is expected to exchange information rather than work in isolation. Its defining feature is not the steelwork, which every hoist has, but the logic around it. The automatic landing doors and call handling make it behave like a building lift. The vertical logistics scheduling system lets it take part in automated workflows, and its expansion capability allows it to integrate with intelligent construction platforms. The comparison BMR itself draws is with equipment that has only limited system integration capability.

Technical Specifications

SpecificationValue
ModelSC200/200ZA
Cage configurationTwin-cage
Rated load capacity2×2000kg
Cage dimensions (L×W×H)3.2×1.5×2.45m
Maximum installation height242m
Lifting speed0~36m/min
Motor power2×2×15kw
Landing doorsAutomatic
Call handlingExternal floor calls and in-cage floor selection
Robot interactionVia integrated vertical logistics scheduling system

Specifications are as published by the manufacturer and are confirmed against the datasheet at quotation.

The manufacturer has not published the weight, the mast section dimensions, the power supply voltage, the overall dimensions of the hoist, the IP rating, the certifications, the contents of the delivery, the operating temperature range, or the control interface and communication protocols; all of these are confirmed at quotation.

How does the BMR Intelligent Construction Hoist work with construction robots?

A floor-finishing or grinding robot is only productive on the floor where the work is. On a tall structure, moving it between levels is often slower than the task itself. The SC200/200ZA addresses this through its integrated vertical logistics scheduling system. When connected to that system, the hoist supports automated interaction with compatible construction robots and gives them barrier-free transport between floors. In practical terms, the hoist becomes part of the robot's route rather than an obstacle at the end of it.

The manufacturer presents the result in terms of site performance: more efficient vertical logistics channels and a construction programme that stays on track. The automatic landing doors are central to this. A cage that opens its own doors at the landing and answers a call from that floor is a cage a machine can use. The same features help human crews, who can call a cage from their floor or choose a destination from inside it. Buyers planning robotic workflows are welcome to discuss the pairing of specific robots with the scheduling system while the quotation is prepared.

What does the safety management system mean for contractors and rental providers?

Construction hoists are often owned by one party, rented to another and operated under the authority of a third. Responsibility for their condition can blur as they move between projects. The safety management system configured for this hoist is built around that reality. It enables full-life-cycle quality and safety supervision of the equipment by three parties: the factory, rental and engineering service providers, and general contractors. Each of them has a view of the hoist across its working life, rather than only at handover.

For a rental company, that means a fleet asset whose history can be followed from project to project. For a general contractor, it means oversight of a critical piece of site equipment that does not depend on paperwork alone. For the manufacturer, it creates a feedback channel from the field.

Who is the BMR Intelligent Construction Hoist for?

The first group is general contractors delivering high-rise smart building projects. On these sites, vertical transport limits the pace of work, and digital site management is already part of the plan. The twin-cage SC200/200ZA, with an installation height of up to 242m, suits structures where one hoist must serve many floors over a long programme.

The second group is rental and engineering service providers. For them, the full-life-cycle supervision built into the safety management system is a reason to choose this hoist for a fleet that moves between clients. The third group is developers and contractors already investing in robotic construction. If your site plans call for machines from the Construction Robots range to work on upper floors, a hoist that interacts with compatible robots through a scheduling system removes a manual step from every floor change. BMR offers this hoist in the SC200/200ZA configuration, so there is no alternative version to recommend for a different segment. Your project requirements should be set out when you request a quotation.

What is the BMR Intelligent Construction Hoist used for?

  1. High-rise material transport: moving loads to working floors in two cages, each rated within the 2×2000kg capacity.
  2. Robot transfer between floors: carrying compatible construction robots from level to level through the vertical logistics scheduling system.
  3. Call-driven site logistics: answering requests from landings and from inside the cage, so that transport follows actual demand on the floors.
  4. Smart building system projects: serving sites where equipment is expected to share data and act within coordinated workflows.
  5. Fleet supervision by rental providers: following each hoist's quality and safety record across its life through the safety management system.
  6. Integration with site platforms: connecting vertical transport to intelligent construction platforms for wider coordination of the site.

Pricing and Availability

Robots Middle East quotes the BMR Intelligent Construction Hoist for each project individually, because the installation height, site conditions and integration with robots or construction platforms all shape the final configuration. Please share the height of the structure, the expected loads and any robotic or digital systems already planned for the site, so that the quotation reflects the work the hoist will actually do. Delivery, customs clearance and support are arranged together with the quotation. To begin, the quotation request for the BMR Intelligent Construction Hoist is available on this page.

Frequently Asked Questions

Which model of the BMR Intelligent Construction Hoist is offered?

The configuration offered is the SC200/200ZA, a twin-cage hoist with a rated load capacity of 2×2000kg.

How high can the SC200/200ZA be installed?

The maximum installation height is 242m. The mast arrangement for a specific building is planned together with Robots Middle East.

How fast does the hoist travel?

The lifting speed is 0~36m/min, and the stated motor power is 2×2×15kw.

Can construction robots use the hoist?

Yes. When connected to a vertical logistics scheduling system, the hoist interacts with compatible construction robots and gives them barrier-free transport between floors. Robots Middle East can advise on the robots planned for your site.

Does the hoist have automatic landing doors?

Yes. It is equipped with automatic landing doors and responds both to external floor calls and to floor selection commands made inside the cage.

Who can supervise the hoist's safety?

The safety management system enables full-life-cycle quality and safety supervision by the factory, by rental and engineering service providers, and by general contractors.

Where can I buy the BMR Intelligent Construction Hoist and what does it cost?

Robots Middle East supplies the hoist across the Middle East and prices it by individual quotation. The cost depends on the installation height, the configuration and the integration required, and it is set out in a quotation you can request from this page.

Summary

The control tower on an airport apron does not make aircraft fly faster. It makes every movement count. The BMR Intelligent Construction Hoist applies the same principle to the vertical route of a high-rise site. The SC200/200ZA pairs a twin-cage configuration rated at 2×2000kg and a maximum installation height of 242m with automatic landing doors and call handling from the floors and the cage. Its vertical logistics scheduling system lets compatible construction robots travel between floors without barriers, and its safety management system gives the factory, rental providers and contractors a shared view of the equipment over its whole life. For a project that wants its vertical traffic scheduled rather than improvised, with quotation, delivery and support from Robots Middle East, this page is the starting point.

Specifications

–36 m/min
Max Speed

General

BRAND BMR
MODEL SC200/200ZA
ROBOT USE INDUSTRIAL

Physical

LENGTH 320.0 cm
WIDTH 150.0 cm
DEPTH 245.0 cm

Performance

MAXIMUM SPEED 0–36 m/min

Source Details

RATED POWER Rated load capacity: 2×2000 kg. Maximum installation height: 242 m. Motor power: 2×2×15 kW.

Product Questions

No questions yet. Be the first to ask.

0/255

Downloads

Write a Review
You're reviewing: BMR Intelligent Construction Hoist
loader
Loading...

You submitted your review for moderation.