Fairino Cobot (FR3-C)
In stock
- BRAND:
- FAIRINO
- PART #:
- FR3-C
- ORIGIN:
- China
- AVAILABILITY:
- SUBJECT TO AVAILABILITY
- SKU:
- Fairino-FR3-C
Fairino Cobot (FR3-C)
Most of what a small robot achieves happens in the last few centimetres of its arm: the angle at which a screwdriver meets a thread, the twist that seats a component in a fixture, the tilt that presents a part squarely to a camera. A heavy upper structure and an awkward wrist make every one of those movements harder, however impressive the base figures look on paper. The Fairino Cobot (FR3-C) is the FR3-series arm that concentrates its engineering where that work is actually done, combining a lighter mechanical structure with a modified wrist articulation in a 6-degree-of-freedom collaborative robot intended for industrial cells that call for compact integration and reduced system weight. It handles a 3 kg payload across a 622 mm reach and returns to a taught pose within ±0.05 mm.
Robots Middle East supplies the Fairino Cobot (FR3-C) to manufacturers, system integrators, research institutions and technical training centres across the Middle East. We prepare each quotation around the application you describe, coordinate import and delivery to your site, and remain your point of contact for technical support once the arm is in service.
Background
FAIRINO and its collaborative robot family
FAIRINO builds a family of collaborative arms that runs from the compact FR3 series through to larger machines such as the Fairino Cobot (FR16) and the FR30, giving integrators one design language and one supplier across projects of very different scale. Within the FR3 series itself, the sources name several variants, among them the FR3, the FR3-WMS, the FR3-WML and the FR3-C described on this page. Each is a separate product, and figures for one should not be read across to another; this article deals exclusively with the FR3-C. The full line-up can be browsed on the Fairino category page.
A lighter structure and a reworked wrist
What sets the FR3-C apart inside its own series is not a larger working envelope or a heavier payload, but a lighter mechanical structure and a modified wrist articulation. The second wrist joint offers a working range of 0°–355° at up to ±180°/s, while the third wrist joint covers ±175° at the same speed. Together with a base joint that turns through ±175° at up to ±150°/s, this gives the tool generous freedom of orientation in a small volume. The arm weighs approximately 10 kg and stands on a 125 mm footprint, so the structure it is mounted on carries less load and gives up less surface to the robot. Aluminium and steel make up its construction.
Technical Specifications
| Specification | Fairino Cobot (FR3-C) |
|---|---|
| Degrees of freedom | 6 rotating joints |
| Payload | 3 kg |
| Reach | 622 mm |
| Pose repeatability (ISO 9283) | ±0.05 mm |
| Maximum TCP speed | 1 m/s |
| Base: working range | speed | ±175° | ±150°/s |
| Wrist2: working range | speed | 0°–355° | ±180°/s |
| Wrist3: working range | speed | ±175° | ±180°/s |
| Footprint | 125 mm |
| Weight | approximately 10 kg |
| IP classification | IP54 |
| Noise | <65 dB |
| Operating temperature | 0–45°C |
| Operating humidity | 90% RH (non-condensing) |
| Materials | Aluminium, Steel |
| Tool I/O | DI 2, DO 2, AI 1, AO 1 |
| Tool power supply | 24V / 1.5A |
| Typical average power | 200 W |
| Typical peak power | 230 W |
| Editions | IP54, IP65 and Black |
Specifications are as published by the manufacturer and are confirmed against the datasheet at quotation.
The manufacturer has not published the controller model, the communication protocols, the programming software, the safety certifications, the permitted mounting orientations, a maximum payload figure, the cable length, the shoulder and elbow joint ranges or the contents of the box; each of these is confirmed at quotation.
What makes the FR3-C different from the standard FR3?
Both arms belong to the same FR3 series, so the decision between them is less about size class and more about how the robot will be integrated. The FR3-C is the variant with the lighter mechanical structure and the modified wrist articulation. That matters most where the robot is not bolted to a heavy floor plinth but built into something else: a machine frame, a bench, a moving platform or a test rig whose own structure has to carry the arm. Reducing system weight eases the demands on that structure, and a compact base leaves more of the work surface for fixtures, feeders and parts.
The wrist is the second argument. A 0°–355° range on the second wrist joint and ±175° on the third let the tool approach a part from many angles without the arm having to reconfigure its whole posture, which tends to keep cycle paths short and the swept volume small. For applications dominated by orientation rather than distance, such as fastening, inserting, inspecting from several sides or presenting parts to a sensor, that is where the FR3-C earns its place. Buyers whose cells do not need the lighter build or the altered wrist should compare it directly with the Fairino Cobot (FR3) before deciding.
Is an IP54 cobot suitable for factories in the Middle East?
The standard FR3-C carries an IP54 classification and is rated for operation from 0–45°C at up to 90% RH, non-condensing. In a conditioned production hall or laboratory, which describes most electronics, pharmaceutical and light assembly sites in the region, those limits sit comfortably within normal conditions. The upper temperature limit deserves attention in warehouses, workshops or enclosures that are not air-conditioned during the summer months, where ambient temperatures can approach or exceed the rated range; such installations should be assessed before the arm is specified. Where fine dust or liquid spray is a concern, the IP65 edition of the FR3-C is the variant to discuss, and the Black edition is available for buyers with aesthetic or optical requirements. Our team at Robots Middle East will review site conditions with you as part of the quotation.
Who is the Fairino Cobot (FR3-C) for?
System integrators building compact cells are the most natural buyers. The small footprint and the approximately 10 kg arm weight allow a robot to be fitted into enclosures, benches and machine frames that could not accommodate a larger industrial arm, while the tool I/O and 24V / 1.5A tool supply let grippers, small screwdrivers or sensors connect at the wrist.
Machine builders and OEMs who want to embed a collaborative arm in their own equipment will value the reduced system weight, since it simplifies the frame and keeps the finished machine easier to transport and install. Electronics and small-parts manufacturers, for whom repeatability of ±0.05 mm is more relevant than reach, form another clear segment. Universities, research laboratories and technical colleges gain a compact, quiet arm, rated below 65 dB, that can share a room with people.
The FR3-C is the wrong choice where the parts are heavy or the work envelope is large. Projects in that category should look at the larger arms in the Cobots category, and teams that want the FR3 class without the lighter build should start with the standard FR3.
What is the Fairino Cobot (FR3-C) used for?
- Small-part pick and place: transferring light components between trays, feeders and fixtures in compact assembly cells.
- Screw driving and fastening: presenting a lightweight screwdriver at the required angle, where wrist freedom shortens the path between fastening points.
- Machine tending: loading and unloading small machines, presses or test stations where floor space beside the machine is scarce.
- Inspection and testing: moving a part or a sensor through several orientations in front of a camera or measuring device.
- Laboratory automation: handling samples, vials and consumables on a bench in research and quality-control environments.
- Education and research: teaching robot programming and collaborative operation with an arm sized for a classroom or lab bench.
Pricing and Availability
Robots Middle East does not publish a fixed price for the Fairino Cobot (FR3-C), because the edition, the end-of-arm tooling and the scope of integration shape every project differently. Tell us about your application, your site and the edition you have in mind, and we will prepare a quotation that reflects your requirements and confirms the specifications against the current datasheet. Delivery, customs clearance and technical support are arranged together with your quotation. The quotation request form for the FR3-C is available on this page.
Frequently Asked Questions
What payload and reach does the Fairino Cobot (FR3-C) offer?
The FR3-C has a payload of 3 kg and a reach of 622 mm. It moves on 6 rotating joints with a maximum TCP speed of 1 m/s.
How precise is the FR3-C?
Its pose repeatability is ±0.05 mm, measured to ISO 9283. That level suits small-part assembly, fastening and inspection tasks.
Which editions of the FR3-C are available?
The FR3-C is available in IP54, IP65 and Black editions. Robots Middle East will help you choose the edition that matches your environment.
Can the FR3-C operate in hot or humid conditions?
The arm is rated for 0–45°C and up to 90% RH, non-condensing. Installations in spaces without air-conditioning should be reviewed against these limits before ordering.
What can be connected at the tool flange?
The wrist provides tool I/O of DI 2, DO 2, AI 1 and AO 1, together with a 24V / 1.5A tool power supply. This covers many small electric grippers, sensors and lightweight tools.
Which controller and programming software does the FR3-C use?
The manufacturer has not published the controller model, the programming software or the communication protocols for this variant. These details are confirmed with your quotation.
Where can I buy the Fairino Cobot (FR3-C) and what does it cost?
You can buy the FR3-C from Robots Middle East, which supplies it across the Middle East. The cost depends on the edition, tooling and integration scope, so request a quotation on this page to receive an offer for your project.
Summary
A small collaborative robot is judged by what happens at its wrist, and the Fairino Cobot (FR3-C) has been shaped around exactly that. Its lighter mechanical structure and modified wrist articulation set it apart within the FR3 series, while a 3 kg payload, 622 mm reach, ±0.05 mm repeatability, 125 mm footprint and an arm weight of approximately 10 kg make it a natural fit for compact cells, embedded machines and laboratory benches. Three editions cover standard, more demanding and visually specific environments. For manufacturers, integrators and institutions across the region who need orientation and precision more than size, and who want Robots Middle East to handle quotation, delivery and support, this page is the starting point.