Fairino Lightweight Collaborative Production And Welding Robot (FR3(WMS))
In stock
- BRAND:
- FAIRINO
- PART #:
- FR3(WMS)
- ORIGIN:
- China
- AVAILABILITY:
- SUBJECT TO AVAILABILITY
- SKU:
- Fairino-FR3(WMS)
Fairino Lightweight Collaborative Production And Welding Robot (FR3(WMS))
Its name carries two jobs at once. The Fairino Lightweight Collaborative Production And Welding Robot (FR3(WMS)) is expected to handle routine production tasks one week and a welding torch the next, often on the same floor and with the same team. Most small arms are built for the first job and only tolerate the second. This one was designed by FAIRINO specifically for flexible production and complex welding scenarios. Its specification follows that brief: a light arm that mounts in any orientation, protection against dust, oil and water jets, and a reach that suits compact welding fixtures.
Robots Middle East supplies the FR3(WMS) to manufacturers, fabrication workshops, integrators and training centres across the Middle East. Our team prepares each quotation, arranges delivery to your site and provides support after installation. We can also advise on whether this version or another member of the FR3 family is the better fit for your application.
Background
FAIRINO and the FR3 family
FAIRINO builds the FR series of collaborative robots. The range runs from compact arms such as the FR3 up to larger models including the FR16, FR20 and FR30. The FR3 family comprises four versions: the FR3, the FR3-C, the FR3-WMS and the FR3-WML. They share a compact, lightweight format, but each is presented for a different emphasis. The FR3(WMS) is the version FAIRINO positions for flexible production combined with complex welding work. A buyer comparing the family should therefore treat it as a welding-oriented member of the line rather than as a general-purpose arm with a different label.
Built for the welding environment
Welding is hard on equipment. Spatter, grinding dust, cutting fluids and cleaning routines all work against mechanisms designed mainly for clean assembly benches. The FR3(WMS) arm is resistant to dust, oil and water jets, making it ideal for harsh welding applications. The arm carries an IP54 classification, with IP65 available as an option. It is constructed from aluminium and steel. A 24V/1.5A tool I/O power supply at the wrist feeds end-of-arm equipment without separate cabling to the base. Six rotating joints give the torch the freedom it needs to approach seams from awkward angles. The final wrist joint turns through ±360°, so the tool can follow continuous paths around a workpiece.
Technical Specifications
| Specification | Value |
|---|---|
| Payload | 3kg |
| Reach | 622mm |
| Degrees of freedom | 6 rotating joints |
| Pose repeatability (ISO 9283) | ±0.02mm |
| Base joint working range / max speed | ±175° / ±150°/s |
| Wrist 3 working range / max speed | ±360° / ±180°/s |
| Typical TCP speed | 1m/s |
| IP classification (arm) | IP54 (IP65 Optional) |
| Noise | <65db |
| Robot mounting | Any orientation |
| Arm weight | ≈10.5kg |
| Footprint | 128mm |
| Operating temperature | 0—45℃ |
| Tool I/O power supply | 24V/1.5A |
| Materials (arm) | Aluminium, Steel |
| Human-machine interface | 10.1 inch teach pendant or mobile terminal Web APP |
| Power consumption | Average 90W, peak 130W |
Specifications are as published by the manufacturer and are confirmed against the datasheet at quotation.
The manufacturer has not published whether a teach pendant is included in the box, the controller input voltage, the length of the robot's main cable or a lifetime rating independent of the warranty; Robots Middle East confirms these points with your quotation.
What makes the FR3(WMS) suited to welding rather than general production?
The difference lies in how the arm is protected and how it moves. A collaborative robot for clean assembly can be lightly sealed, because its working day involves little more than air and handled components. A welding cell is another matter. The FR3(WMS) is built to resist dust, oil and water jets. Its IP54 arm classification, with an IP65 option, gives buyers a way to match protection to the conditions of their bay. The optional upgrade deserves serious consideration where grinding or wash-down is part of the routine.
Motion matters as much as sealing. A weld bead depends on the torch returning to the same path, run after run. The arm's pose repeatability of ±0.02mm, measured to ISO 9283, supports that kind of consistency. The wrist's ±360° range lets the torch trace a circumferential seam without stopping to unwind. A typical TCP speed of 1m/s keeps repositioning moves between seams brisk. The arm can still run slower, more controlled paths for the weld itself.
The production half of the name rests on the same qualities. A 3kg payload and a 622mm reach suit small-part handling, inspection and assembly at a bench. Because the arm can be mounted in any orientation, a cell built for welding can be rearranged for another task without changing the robot.
How does the FR3(WMS) fit into an existing workshop?
Space is usually the first constraint in an established workshop, and the FR3(WMS) asks for very little of it. Its footprint is 128mm and the arm weighs ≈10.5kg. That makes floor, wall, ceiling or inverted installations on fixtures and frames realistic options, since mounting is permitted in any orientation. Power demand is modest, at an average of 90W and a peak of 130W. Noise stays below 65db, which matters where operators work alongside the robot for a full shift.
Programming is equally flexible. Operators can work from a 10.1 inch teach pendant or from a Web APP on a mobile terminal. This suits workshops where a supervisor moves between several cells rather than staying at one. The rated operating temperature is 0—45℃, so climate control in hot fabrication halls should be planned with that range in mind. Our engineers are glad to discuss your site conditions with you.
Who is the FR3(WMS) for?
The clearest fit is the small or medium fabrication shop. These businesses weld in batches, change part families often and cannot justify a dedicated, fenced robotic cell for every job. Contract manufacturers who alternate between welding and light production work on the same floor are a second natural audience, because one arm can serve both roles. Training centres and technical colleges preparing welders and automation technicians will also find a compact, collaborative format practical for teaching. System integrators building portable or cart-based welding stations for their own customers form a fourth group.
Not every buyer needs the welding emphasis. Where the application is general precision automation in a clean environment, the standard Fairino Cobot (FR3) or the Fairino Cobot (FR3-C) may be the more appropriate starting point. Buyers who want a welding-focused arm in an even lighter format should compare the Fairino Ultra Lightweight Collaborative Manufacturing And Welding Robot (FR3(WML)). Robots Middle East can talk you through the differences between versions. The wider choice is set out in our Welding Robots and Cobots categories.
What is the FR3(WMS) used for?
- Small-batch arc welding: repeatable seams on short production runs where manual welding is slow and inconsistent.
- Circumferential and contour seams: continuous paths around pipes, flanges and brackets, helped by the wrist's full rotation.
- Portable welding stations: cart- or fixture-mounted cells that move between bays as work demands.
- Light production handling: picking, placing and positioning small components within the arm's payload and reach.
- Welding training and education: teaching automated welding and cobot programming in a compact, collaborative setting.
- Mixed-use workshops: one arm switching between welding and production tasks as the schedule changes.
Pricing and Availability
Pricing for the FR3(WMS) is provided by quotation, so that the offer reflects your configuration, including the optional IP65 protection and the interface you prefer. Delivery, customs clearance and technical support are arranged together with your quotation from Robots Middle East. To begin, please send us details of your application and site, using the quotation request available on this page.
Frequently Asked Questions
Is the FR3(WMS) the same robot as the standard FR3?
No. The FR3(WMS) is a separate version of the FR3 family, designed specifically for flexible production and complex welding scenarios. Robots Middle East can explain how it differs from the FR3 and FR3-C for your application.
What payload and reach does the FR3(WMS) offer?
The FR3(WMS) has a payload of 3kg and a reach of 622mm. Torch and tooling mass should be checked against the payload when the cell is planned.
How well is the arm protected for welding environments?
The arm is rated IP54, with IP65 available as an option, and is resistant to dust, oil and water jets. It is built from aluminium and steel.
Can the FR3(WMS) be mounted on a wall or ceiling?
Yes. The robot can be mounted in any orientation, and its footprint is 128mm.
How is the robot programmed?
Programming is carried out through a 10.1 inch teach pendant or through a Web APP on a mobile terminal. Both options suit operators who move between several workstations.
How precise is the FR3(WMS)?
Pose repeatability is ±0.02mm, measured to ISO 9283. This supports consistent torch paths from one part to the next.
Where can I buy the Fairino FR3(WMS) and what does it cost?
You can buy the FR3(WMS) from Robots Middle East, which supplies it across the Middle East. The cost depends on your configuration and is set out in a formal quotation, which you can request on this page.
Summary
A robot that must do two jobs has to be good at the harder one, and in a workshop that is welding. The FR3(WMS) meets that demand with dust, oil and water-jet resistance, an IP54 arm with an IP65 option, and ±0.02mm repeatability. It also keeps the light weight, small footprint and free mounting that make it useful for production tasks between welding runs. For manufacturers in the Middle East who need one arm to serve both roles, Robots Middle East quotes, delivers and supports the FR3(WMS), and this page is the starting point.