Fairino Ultra Lightweight Collaborative Manufacturing And Welding Robot (FR3(WML))

The Fairino FR3(WML) is an ultra-lightweight collaborative arm built for precise welding and flexible production, light enough to be carried by hand between workstations. Collision detection allows it to work safely beside your operators, and Robots Middle East supplies it to workshops and integrators across the region.

In stock

BRAND:
FAIRINO
PART #:
FR3(WML)
ORIGIN:
China
AVAILABILITY:
SUBJECT TO AVAILABILITY
SKU:
Fairino-FR3(WML)

Fairino Ultra Lightweight Collaborative Manufacturing And Welding Robot (FR3(WML))

On a circular or contoured seam, the difficult moment is rarely the first strike of the arc. It is the point at which the wrist runs out of travel, and the torch has to pause, unwind and resume. The Fairino Ultra Lightweight Collaborative Manufacturing And Welding Robot (FR3(WML)) is built for exactly this kind of work. Its sixth axis rotates through ±360°, its pose repeatability is ±0.05 mm to ISO 9283, and at approximately 11.25 kg it is an arm that one person can lift, carry and set up at the next workstation. Collision detection allows it to share a bench with a welder rather than stand behind a fence.

Robots Middle East sells the FR3(WML) and supplies it to manufacturers, fabrication workshops, system integrators and training institutions across the Middle East. Our team prepares each quotation, coordinates delivery to your site and remains your point of contact for technical support once the robot is in service.

Background

FAIRINO and the FR3 family

FAIRINO develops collaborative robots under the FR name, and the FR3 is the compact end of that range. The family comprises three versions: the standard Fairino Cobot (FR3), the FR3(WML) presented on this page, and the Fairino Lightweight Collaborative Production And Welding Robot (FR3(WMS)). Both suffixed versions are positioned for welding as well as general production work, while the standard FR3 is presented as a general-purpose cobot. Each figure given on this page belongs to the FR3(WML) alone and should not be read across to its siblings.

A welding arm that travels light

The FR3(WML) is an ultra-lightweight collaborative robot designed for high-precision welding and flexible manufacturing. Those two aims shape its character. Welding demands a steady, repeatable path and a wrist that can follow a seam around a shape; flexible manufacturing demands an arm that can be moved, re-taught and redeployed as orders change. The compact design allows single-person handling, and collision detection supports safe human-robot collaboration. In practical terms, this is a robot intended to be taken to the work, rather than a fixed installation around which the work must be arranged.

Collaborative robots of this class are typically used where a full robotic welding cell would be too large, too costly to justify or too rigid for the production mix. They are commonly programmed by guiding the arm or through a teach interface, and they are deployed beside operators following a risk assessment of the specific application.

Technical Specifications

SpecificationValue
Pose repeatability (ISO 9283)±0.05 mm
Wrist 3 working range±360°
Noise<65 dB
Weight≈11.25 kg

Specifications are as published by the manufacturer and are confirmed against the datasheet at quotation.

The manufacturer has not published the welding process compatibility, the certifications, the cable length of the robot arm or the controller dimensions, and the payload and reach are not covered by the data reviewed for this page; all of these are confirmed at quotation.

Why does a ±360° sixth axis matter for curved-surface welding?

When a torch follows a seam around a curved or rounded part, the final joint of the arm carries much of the burden of keeping the torch at the correct angle to the joint. A narrow rotation range forces the programmer to split the path, reposition the part or accept compromises in torch orientation. On the FR3(WML), the sixth axis rotates through ±360°, which enables complex curved-surface welding. That range gives the path planner considerably more room to keep the torch oriented as the seam turns.

Rotation alone does not make a good weld; the path must also be repeated faithfully from one part to the next. Here the FR3(WML) has a pose repeatability of ±0.05 mm to ISO 9283, the standard method for measuring how consistently an industrial robot returns to a taught position. Taken together, a wide wrist range and consistent positioning are the two qualities a buyer evaluating a robot for contoured seams will look at first.

The third consideration is the environment in which the arm works. With a noise level below 65 dB, the FR3(WML) itself adds little to the sound of a workshop, which is relevant where operators work alongside it for a full shift.

How does the FR3(WML) compare with the FR3 and FR3(WMS)?

The three FR3 versions share a family name, but each has its own datasheet, and this page sets out the figures for the FR3(WML) only. What distinguishes them here is their positioning: the standard FR3 as a general-purpose collaborative robot, and the FR3(WML) and FR3(WMS) as versions oriented towards welding and production. The FR3(WML) figures in the table above should not be assumed to apply to either sibling, nor should a sibling's figures be assumed to apply here.

If you are deciding between the versions, the most reliable approach is to describe your application to Robots Middle East: the parts, the seams, the welding process you use and the space available. Our team will then set out the relevant values for each version side by side, so that your choice rests on the right datasheet for the right arm.

Who is the FR3(WML) for?

The FR3(WML) suits fabrication workshops that weld in short or varied batches and cannot dedicate a fixed cell to each job. Because one person can handle the arm, it can be moved between benches as the production plan changes, which makes it relevant to job shops, maintenance departments and contract manufacturers whose work rarely repeats for long.

System integrators building compact welding stations for clients are a second natural audience, as are manufacturers introducing automation for the first time who want a collaborative arm that can work beside existing staff. Technical colleges, universities and corporate training centres teaching robotic welding will also find a light, collaborative arm practical in a classroom or laboratory setting.

Buyers whose requirement is general handling, assembly or machine tending rather than welding may find the standard FR3 a closer match, while those comparing welding-oriented options should also review the FR3(WMS). The wider range is available in our Welding Robots and Cobots categories.

What is the FR3(WML) used for?

  1. Curved-surface welding — following contoured seams, where the wide sixth-axis rotation keeps the torch oriented around the part.
  2. Round and wrap-around seams — welding joints on rounded components that would otherwise require repositioning of the part.
  3. Short-run fabrication — automating repeat welds in batches too small to justify a dedicated robotic cell.
  4. Reconfigurable production — moving the arm between workstations as part of a flexible manufacturing layout.
  5. Shared workspaces — working alongside operators, with collision detection supporting safe collaboration.
  6. Training and process development — teaching robotic welding and trialling automation before scaling up.

Pricing and Availability

Robots Middle East supplies the FR3(WML) on a quotation basis, so that the offer reflects your application, the required configuration and the location of your site. When you request a quotation, please describe the parts you intend to weld, the welding process and power source you use, and the workspace in which the robot will operate. Delivery, customs clearance and after-sales support are arranged together with your quotation. To begin, the quotation request for the Fairino Ultra Lightweight Collaborative Manufacturing And Welding Robot (FR3(WML)) is available on this page.

Frequently Asked Questions

Is the FR3(WML) a collaborative robot?

Yes. It is an ultra-lightweight collaborative robot with collision detection for safe human-robot collaboration. As with any collaborative application, the specific installation should be assessed for risk before use.

What is the pose repeatability of the FR3(WML)?

The pose repeatability is ±0.05 mm, measured to ISO 9283.

Can one person move the robot?

Yes. The compact design allows easy single-person handling, and the arm weighs approximately 11.25 kg.

What is the rotation range of the wrist?

The sixth axis (Wrist 3) has a working range of ±360°, which enables complex curved-surface welding.

Is the FR3(WML) suitable for flexible manufacturing?

Yes. It is designed for flexible manufacturing as well as high-precision welding, and its compact, portable design allows it to be redeployed between workstations as production changes.

How loud is the FR3(WML) in operation?

The robot's noise level is below 65 dB.

Where can I buy the Fairino FR3(WML) and what does it cost?

You can buy the FR3(WML) from Robots Middle East, which supplies it across the Middle East. The cost depends on your configuration and project requirements, so please request a quotation on this page.

Summary

The awkward point on a curved seam, where an ordinary wrist reaches the limit of its travel, is where the FR3(WML) makes its case. A sixth axis rotating through ±360°, pose repeatability of ±0.05 mm to ISO 9283 and a weight of approximately 11.25 kg combine in an arm that follows contoured work, returns consistently to its taught path and can be carried to the next job by one person. Collision detection and a noise level below 65 dB make it a reasonable companion on a shared shop floor. For workshops and integrators across the Middle East considering a light, welding-oriented cobot from Robots Middle East, this page is the starting point.

Specifications

Degrees of Freedom
meter / second
Max Speed
kg (6.6 lbs)
Payload

General

BRAND FAIRINO
PART # FR3(WML)
ROBOT TYPE COBOT
ROBOT USE WELDING

Physical

WEIGHT ≈11.25 kg

Mobility

TOTAL DOF 6 DOF

Performance

MAXIMUM SPEED 1 METER / SECOND
MAXIMUM PAYLOAD 3 KG (6.6 LBS)
OPERATING TEMPERATURE 0°C TO 45°C
INGRESS PROTECTION IP54, IP 65

Software

SECONDARY DEVELOPMENT SUPPORTED

Hand

POSITIONING ACCURACY ±0.05 MM

Source Details

MOTION CONTROL SUPPORT Source: FAIRINO FR3-WML page. Payload 3 kg; detailed specification table reach 922 mm (top-card says 622 mm, source conflict noted); 6 rotating joints; pose repeatability per ISO 9283 ±0.05 mm; typical TCP speed 1 m/s. Axis ranges/speeds: base ±175° at ±150°/s; shoulder +85°/-265° at ±150°/s; elbow ±150° at ±150°/s; wrist1 +85°/-265° at ±180°/s; wrist2 ±175° at ±180°/s; wrist3 ±360° at ±180°/s. Footprint 128 mm; robot mounting any orientation; noise <65 dB; operating humidity 90% RH non-condensing; materials aluminium and steel.
RATED POWER Controller: DC MINI Controller 2KW or AC MINI Controller 2KW. Controller power supply 30-60 VDC; output 48 VDC / 42 A max. Controller size 245*180*44.5 mm; DC controller 2.1 kg, AC controller 2.5 kg; galvanized sheet.
CONTROLLER / TELEOPERATION HMI: 10.1 inch teach pendant or mobile-terminal Web App. Robot tool I/O: DI 2, DO 2, AI 1, AO 1; tool I/O power 24 V / 1.5 A. Controller communications: I/O, TCP/IP, Modbus_TCP/RTU; optional CC-Link, Profinet, Ethernet/IP, EtherCAT; SDK C#/C++/Python/ROS/ROS2. Teach pendant: 1280*800 display, 268*210*88 mm, 1.6 kg, ABS/PP, 5 m cable.

What's included

Fairino Ultra Lightweight Collaborative Manufacturing And Welding Robot (FR3(WML))

Product Questions

No questions yet. Be the first to ask.

0/255

Write a Review
You're reviewing: Fairino Ultra Lightweight Collaborative Manufacturing And Welding Robot (FR3(WML))
loader
Loading...

You submitted your review for moderation.