Realman Robotics Open-Source Humanoid Robot (RealBOT)
In stock
- BRAND:
- REALMAN
- PART #:
- RealBOT
- ORIGIN:
- China
- AVAILABILITY:
- SUBJECT TO AVAILABILITY
- SKU:
- Realman Robotics-RealBOT
Realman Robotics Open-Source Humanoid Robot (RealBOT)
In embodied AI, the robot is seldom the finished product. It is the instrument. Research teams change grippers, swap cameras, move to a new compute board and rewrite the task list every few months, and a platform that resists this constant change soon ends up in a corner of the laboratory. The Realman Robotics Open-Source Humanoid Robot (RealBOT) is built on the opposite assumption. Its wheeled base and humanoid upper body are separable modules, and its two arms come from RealMan's own arm family. Its cameras, end-effectors and compute are chosen from a list of named, interchangeable options. What the buyer receives is less a fixed machine than a body that can follow a research programme as it changes direction.
Robots Middle East sells the RealBOT and supplies it to universities, research institutes, system integrators and corporate innovation teams across the Middle East. Robots Middle East prepares the quotation for the chosen version, arranges delivery to your site and remains your point of contact for support once the robot is in service.
Background
RealMan Robotics and the RealBOT Embodied Open Platform
RealMan Robotics builds robotic arms, among them the RX75, RM75 and RM65, and the RealBOT draws directly on that work. The robot carries two RX75 arms, and the platform is also compatible with RealMan's RM75 and RM65 arms. RealMan presented the platform as the RealBOT Embodied Open Platform at IROS 2025, the IEEE/RSJ International Conference on Intelligent Robots and Systems, in an announcement dated 21 November 2025. The choice of a research conference over a trade fair says a good deal about the intended audience. It is aimed at people who build, teach and evaluate robot behaviours, more than at people who simply deploy a finished product. In parts of the manufacturer's material, the robot also appears under the designation RealBot-01.
A modular body with open hardware choices
Modularity is the defining design decision. The wheeled base and the humanoid upper body are separable, so a team can treat mobility and manipulation as distinct subsystems rather than one sealed unit. The platform also stays open on the points that usually tie a research group to a single supplier. It accepts mainstream grippers and dexterous hands from OYMotion, BrainCo and Zhixing. It is compatible with both the NVIDIA Jetson Orin and the Digua RDK S100 compute platforms. Its depth camera depends on the version, with the Intel RealSense D435 offered as an option. For a laboratory that already owns end-effectors or has standardised on one compute ecosystem, these choices can matter more than any single figure in the datasheet.
Technical Specifications
| Specification | Value |
|---|---|
| Product type | Wheeled humanoid robot |
| Architecture | Modular, with separable wheeled base and humanoid upper body |
| Active degrees of freedom | 21 (14 DoF dual arms, 3 DoF waist, 2 DoF legs, 2 DoF neck) |
| Arms | Dual RX75 |
| Single arm payload | 5 kg |
| Overall dimensions | 570 × 465 × 1680 mm |
| Chassis and shoulder width | Both under 465 mm |
| Total weight | ≈ 125 kg |
| Vertical reach | 2100 mm |
| Horizontal reach | 1818 mm (w/o end-effector) |
| Turning radius | 690 mm (in-place) |
| Movement speed | 0.1–1.5 m/s |
| Depth cameras | 5 |
| Fisheye cameras | 3 |
| Wide-angle cameras | 130° FOV ×3 |
| LiDAR | 1; reflectivity 90% @ 40 m |
| IMUs | 2 |
| Audio | Head-mounted microphone array; voice module 6-Mic (Optional) |
| Tactile sensors | Optional |
| Depth camera by version | Data collection version: Orbbec 335LG; Standard version: Intel RealSense D405; RealSense D435 available as an option |
| Battery capacity | 40 Ah (BMS) |
| Charging time | ≈ 2 hours |
| Compute platforms | Compatible with NVIDIA Jetson Orin and Digua RDK S100 |
| Compatible end-effectors | Mainstream grippers and dexterous hands from OYMotion, BrainCo and Zhixing |
| Compatible RealMan arms | RX75, RM75, RM65 |
Specifications are as published by the manufacturer and are confirmed against the datasheet at quotation. The manufacturer has not published the operating system, the runtime per charge, the IP rating, the contents of the box, the software SDK, the operating temperature range or the performance of the computing unit; these details are confirmed at quotation.
What is the difference between the Data collection version and the Standard version?
The sources name two versions and distinguish them by a single specification: the depth camera. The Data collection version comes as standard with the Orbbec 335LG. The Standard version uses the Intel RealSense D405, and the RealSense D435 is available as an option. The published material lists no further differences between the two, so the rest of the specification table describes the RealBOT as a whole.
In practice, the choice usually follows the software a team already runs. A group whose capture pipelines and calibration tools are built around one camera family avoids rework by staying with it. A team assembling a demonstration dataset will want the same camera on every unit it records with, so that the data remain consistent from robot to robot. Robots Middle East can present both configurations side by side, so that the decision rests on your own pipeline rather than on a general preference.
How does the RealBOT move and perceive in indoor spaces?
The RealBOT rolls rather than walks. Its chassis and shoulders are both under 465 mm wide, so it is suited to narrow corridors and crowded indoor rooms. It turns in place within a 690 mm radius and travels at between 0.1 and 1.5 m/s. That range covers both a slow, careful approach to a workbench and an unhurried transit between rooms. Its arms have a vertical reach of 2100 mm and a horizontal reach of 1818 mm without end-effector, which gives a tall working envelope for the shelving, counters and benches found in buildings designed for people.
Perception is layered rather than concentrated in a single sensor. Five depth cameras supply the close-range geometry that manipulation depends on. Three fisheye cameras and wide-angle cameras with a 130° field of view give broad situational coverage around the body. A LiDAR rated at 90% reflectivity at 40 m handles mapping and navigation at room scale. Two IMUs track the robot's own motion, and a head-mounted microphone array opens the way to spoken interaction, with a 6-Mic voice module and tactile sensors available as options. For research groups, this combination means that a single platform can capture visual, spatial, inertial and audio streams together, which multimodal learning work generally requires.
Who is the Realman Robotics Open-Source Humanoid Robot (RealBOT) for?
The clearest fit is the university or institute laboratory working on embodied AI, manipulation or mobile robotics. Such a group needs a full-body platform but would rather spend its effort on algorithms than on building hardware. Teams whose main deliverable is a dataset of demonstrations will usually find the Data collection version the more natural starting point, as it is the configuration named for that work. Groups already invested in Intel RealSense tooling may prefer the Standard version, with the D435 option where their pipeline calls for it.
System integrators form a second segment. They can use the RealBOT to evaluate indoor mobile manipulation for service, logistics or facility tasks before committing to a production design. Developers of grippers and dexterous hands are a third: the compatibility with OYMotion, BrainCo and Zhixing end-effectors lets them test their products on a complete humanoid body. Corporate innovation centres and technical training programmes complete the picture, as they need a credible, reconfigurable platform for demonstrations and teaching. Buyers comparing the RealBOT with other platforms can browse the wider Humanoids range.
What is the Realman Robotics Open-Source Humanoid Robot (RealBOT) used for?
- Embodied AI data collection — recording synchronised multimodal demonstrations to train and evaluate robot learning models.
- Bimanual manipulation research — studying coordinated two-arm tasks with a pair of RX75 arms on a single torso.
- Indoor mobile manipulation — combining navigation and grasping in corridors, laboratories and offices.
- End-effector benchmarking — comparing grippers and dexterous hands from several suppliers on the same body.
- Human–robot interaction studies — exploring spoken and physical interaction through the microphone array and optional tactile sensing.
- Compute platform evaluation — running the same workload on NVIDIA Jetson Orin and Digua RDK S100 to inform deployment decisions.
Pricing and Availability
Robots Middle East supplies the RealBOT on quotation, prepared for the version and options your project requires. Tell us which version you need, whether you would like the RealSense D435, the voice module or tactile sensors, and which end-effectors and compute platform you intend to use. Delivery, customs clearance and support are arranged together with the quotation. A quotation for the configuration your programme needs is available on this page.
Frequently Asked Questions
Does the RealBOT walk on two legs?
No. The RealBOT is a wheeled humanoid: a humanoid upper body mounted on a separable wheeled base. Its 2 leg degrees of freedom are part of its full-body motion rather than a walking gait.
How many degrees of freedom does the robot have?
It has 21 active degrees of freedom: 14 in the dual arms, 3 in the waist, 2 in the legs and 2 in the neck.
What payload can each arm handle?
Each RX75 arm has a payload of 5 kg.
Can I fit my own gripper or dexterous hand?
The platform is compatible with mainstream grippers and dexterous hands from OYMotion, BrainCo and Zhixing. Robots Middle East can advise on the combination that suits your project.
Which compute platforms does it support?
The RealBOT is compatible with both NVIDIA Jetson Orin and Digua RDK S100 platforms.
How long does charging take?
Charging the 40 Ah battery takes approximately 2 hours.
Where can I buy the Realman Robotics Open-Source Humanoid Robot (RealBOT) and what does it cost?
You can buy it from Robots Middle East, which supplies it across the Middle East. The cost depends on the version and options you select, so please request a quotation on this page.
Summary
The RealBOT treats the robot as an instrument rather than a monument. Its separable base and upper body, its two RX75 arms and its 21 active degrees of freedom give it a capable core. Its compatibility with several end-effector brands, two compute platforms and a choice of depth cameras lets that core adapt as a research programme evolves. Its slim chassis, in-place turning and layered perception suit it to the indoor spaces where most embodied AI work actually takes place. The two versions differ only in the depth camera, so the decision comes down to the data pipeline your team already runs. For laboratories, integrators and innovation teams in the region that want a humanoid body able to keep pace with changing research, supplied and supported by Robots Middle East, this page is the starting point.