Inspire Dexterous Left Hand With Tactile Sensors (RH56F1-E2L-T1)
In stock
- BRAND:
- INSPIRE ROBOTS
- PART #:
- RH56F1-E2L-T1
- ORIGIN:
- China
- AVAILABILITY:
- SUBJECT TO AVAILABILITY
- SKU:
- Inspire-RH56F1-E2L-T1
Inspire Dexterous Left Hand With Tactile Sensors (RH56F1-E2L-T1)
In a manipulation laboratory, the instrument that matters most is often the one that touches the object. A camera can watch a grasp and a joint encoder can report where each finger went, but only a hand that senses contact can tell you what actually happened between the fingers and the material. The Inspire Dexterous Left Hand With Tactile Sensors (RH56F1-E2L-T1) approaches dexterity in that spirit. It behaves less like a gripper that simply closes on command and more like a measuring instrument with fingers: palm tactile sensing, fine force resolution and a 1 kHz EtherCAT link work together, so that every grasp produces data a researcher can repeat, compare and publish.
Robots Middle East supplies the RH56F1-E2L-T1 to universities, research institutes, robotics start-ups and system integrators throughout the Middle East. Our team prepares a quotation for the exact configuration you specify, coordinates delivery to your facility and supports the hand after installation, so that your engineers can concentrate on the experiment rather than on the logistics behind it.
Background
Inspire Robots and the RH56 family
Inspire Robots develops dexterous robotic hands for humanoid robots, research platforms and manipulation projects, and its catalogue covers several anthropomorphic hand designs alongside related actuation products. You can see the wider range in our Inspire Robots collection. Within that range, the RH56F1 line is offered in left- and right-hand forms and in two communication pairings, EtherCAT + RS485 and EtherCAT + CAN FD. The RH56F1-E2L-T1 is the left-hand model with tactile sensors, intended for laboratories that want a mirrored counterpart to a right hand or a single left hand for one-sided tasks.
Positioning: a tactile, all-metal research hand
The manufacturer positions the hand as an all-metal tactile robotic hand for real-time EtherCAT control and repeatable manipulation research. Two design choices support that positioning. The first is mechanical: the body is made entirely of metal and carries a 30 kg static passive load capacity, and the hand has been verified through 20 standardised durability tests. The second is sensory: eight palm tactile sensors with a 30N range, a force resolution of 0.1N and a tactile sensor accuracy of 5% FS allow the controller to register contact rather than infer it. Combined with a repeatability of ±0.2mm, these choices make the hand well suited to experiments where the same grasp must be performed many times under comparable conditions.
Technical Specifications
| Specification | Value |
|---|---|
| Product type (Left / EtherCAT + RS485) | All-metal tactile robotic hand for real-time EtherCAT control and repeatable manipulation research |
| Degrees of freedom / joints (Left / EtherCAT + RS485) | 6 DOF / 12 joints |
| Weight (Left / EtherCAT + RS485) | 630 g ±10 g with tactile sensing |
| Communication frequency (Left / EtherCAT + RS485) | 1 kHz communication |
| Real-time communication | 1 kHz EtherCAT real-time communication |
| Communication versions | EtherCAT + RS485; EtherCAT + CAN FD |
| Body and static passive load | All-metal body, 30 kg static passive load capacity |
| Palm tactile sensors | 8 palm tactile sensors, 30N range |
| Tactile sensor accuracy | 5% FS |
| Force resolution | 0.1N |
| Thumb fingertip force | ≥15N |
| Finger fingertip force | ≥10N |
| Repeatability | ±0.2mm |
| Hand closing time | ≤0.8s |
| Operating voltage | 24V–48V |
| Qualification | Verified through 20 standardised durability tests |
| In the box | One RH56F1 hand in the ordered configuration; mounting adapters, controller, power supply and cables are included only when itemised in the order |
Specifications are as published by the manufacturer and are confirmed against the datasheet at quotation.
The manufacturer has not published the IP rating, the operating temperature, the payload when mounted on an arm, the service life or the output torque; we confirm these with you at quotation.
What does tactile sensing add to the RH56F1-E2L-T1?
A hand without touch sensing can still close reliably, yet it learns about contact only indirectly, from motor current or from the position at which a finger stops. The RH56F1-E2L-T1 adds a direct channel. Its eight palm tactile sensors cover a 30N range at 5% FS accuracy, and force can be resolved in steps of 0.1N. For a researcher, that means the palm reports how firmly an object is being held while the grasp is still in progress, and the 1 kHz EtherCAT link delivers those readings quickly enough for a control loop to respond.
This matters most in work where the force itself is the subject of study: compliant grasping, handling of fragile items, slip detection and the collection of contact-rich demonstration data for learning-based controllers. Fingertip forces of at least 15N at the thumb and at least 10N at the fingers give the hand enough authority for everyday objects, while the tactile layer keeps that authority measurable. Where tactile data is not part of the research question, the Inspire Dexterous Left Hand (RH56F1-E2L) without tactile sensors may be worth comparing; its details are set out on its own page.
Should I choose the EtherCAT + RS485 or the EtherCAT + CAN FD version?
Both versions are built around EtherCAT, the industrial real-time fieldbus that suits deterministic, high-rate control. The difference lies in the second interface, which typically governs how the hand fits into an existing laboratory set-up. RS485 is a long-established serial standard found on many test benches and embedded controllers, whereas CAN FD is common on mobile robots and humanoid platforms whose other joints already share a CAN-based bus. Choosing the version that matches the rest of your robot generally reduces integration effort and wiring complexity.
The weight, degrees of freedom and communication frequency in the table refer to the left-hand EtherCAT + RS485 version. If your platform calls for EtherCAT + CAN FD, please mention it when you contact Robots Middle East, so that your mechanical and electrical planning rests on the configuration you will actually receive.
Who is the Inspire Dexterous Left Hand With Tactile Sensors (RH56F1-E2L-T1) for?
The hand is aimed first at university and institutional research groups studying dexterous manipulation, grasp planning and tactile control, where repeatability and measurable contact forces matter as much as dexterity. Humanoid robot developers form a second group: a left hand with a 24V–48V operating voltage range and a real-time EtherCAT interface can be integrated into a full-body platform alongside the robot's other actuators.
Teams that collect teleoperation or demonstration data for machine learning will value tactile readings recorded together with joint data, as these give models information that vision alone cannot supply. System integrators building proof-of-concept cells for assembly, inspection or laboratory automation are a further audience, particularly where an all-metal construction is preferred for daily handling.
Projects that require two hands should pair this model with the Inspire Dexterous Right Hand With Tactile Sensors (RH56F1-E2R-T1) for bimanual work. Buyers still comparing designs can browse the full Robot Hands category.
What is the Inspire Dexterous Left Hand With Tactile Sensors (RH56F1-E2L-T1) used for?
- Dexterous manipulation research – repeatable grasping experiments that compare control strategies under consistent conditions.
- Tactile control studies – closing force loops on palm sensor readings to hold objects firmly without crushing them.
- Humanoid robot development – serving as the left end-effector of a full-body humanoid platform.
- Bimanual manipulation – working alongside a right-hand counterpart on tasks that need two coordinated hands.
- Learning-from-demonstration datasets – recording synchronised joint and contact data for training manipulation policies.
- Teaching and demonstration – showing students how tactile sensing and real-time fieldbus control shape robotic grasping.
Pricing and Availability
Robots Middle East supplies the RH56F1-E2L-T1 on a quotation basis, as the final configuration, the communication version and any accessories itemised in the order all affect what is supplied. Please tell us whether you require the EtherCAT + RS485 or the EtherCAT + CAN FD version, together with details of your controller and mounting arrangement, and we will prepare an offer to suit. Delivery, customs clearance and after-sales support are arranged together with your quotation. A quotation for the Inspire Dexterous Left Hand With Tactile Sensors (RH56F1-E2L-T1) can be requested through the enquiry option available on this page.
Frequently Asked Questions
How many degrees of freedom does the RH56F1-E2L-T1 have?
The left-hand EtherCAT + RS485 version has 6 DOF and 12 joints.
How many tactile sensors does the hand have?
The hand has eight palm tactile sensors with a 30N range. Tactile sensor accuracy is 5% FS, and force resolution is 0.1N.
What communication interfaces are available?
The hand uses 1 kHz EtherCAT real-time communication and is offered in EtherCAT + RS485 and EtherCAT + CAN FD versions. Please choose the version that matches your robot's existing bus.
What power supply does it require?
The operating voltage is 24V–48V. A power supply is included only when it is itemised in your order.
Is the hand durable enough for daily laboratory use?
It has an all-metal body with a 30 kg static passive load capacity and has been verified through 20 standardised durability tests.
What is included in the delivery?
One RH56F1 hand in the ordered configuration. Mounting adapters, the controller, the power supply and cables are supplied only when they are itemised in the order.
Where can I buy the Inspire Dexterous Left Hand With Tactile Sensors (RH56F1-E2L-T1) and what does it cost?
You can buy it from Robots Middle East, which supplies customers across the Middle East. The cost depends on the configuration and accessories you specify, so please request a quotation and we will prepare an offer for your project.
Summary
The RH56F1-E2L-T1 rewards the laboratory that treats a robotic hand as an instrument. Its all-metal body and standardised durability testing keep it dependable through repeated trials, while palm tactile sensing, 0.1N force resolution and ±0.2mm repeatability turn each grasp into a measurement rather than a guess. The 1 kHz EtherCAT link brings those measurements to the controller in time to act on them, and the choice of RS485 or CAN FD as the second interface lets the hand fit the platform you already operate. For research groups, humanoid developers and integrators in the Middle East who want a left hand that reports what it touches, this page is the starting point.