SIASUN GCR12-1300
In stock
- BRAND:
- SIASUN
- PART #:
- GCR12-1300
- ORIGIN:
- China
- AVAILABILITY:
- FOR OPPORTUNITIES OVER 1 MILLION USD
- SKU:
- SIASUN-GCR12-1300
SIASUN GCR12-1300
Many automation projects stall not on the robot arm itself but on the conversation between machines. A new arm has to exchange signals with PLCs, vision systems and line controllers that were installed long before it arrived, and every missing protocol becomes a gateway, an adapter or a delay. The SIASUN GCR12-1300 arrives with Tcp/Ip, Modbus/Tcp, Profinet and Ethernet/Ip among its communication options, and pairs them with a 12kg maximum payload and 1300mm of reach. It is a six-axis arm designed to join a production line already in service, rather than require a line built around it.
Robots Middle East supplies the GCR12-1300 to manufacturers, system integrators and research institutions across the Middle East. Our team prepares the quotation, coordinates delivery to your site and remains your point of contact for technical support once the arm is in operation, so that a single partner answers for the project from the first enquiry onwards.
Background
SIASUN and the DUCO sub-brand
SIASUN is the parent company behind the GCR range, and SIASUN DUCO is its sub-brand focused on intelligent robotics. SIASUN DUCO has broken foreign technology monopolies in multiple fields, with all core components independently developed. For a buyer, that lineage matters less as a matter of national pride than as a matter of supply: an arm whose joints, drives and control are developed within one organisation gives a single, accountable origin for the hardware that ends up on your shop floor.
Positioning within the GCR range
The GCR family spans ten versions, from the GCR3-618 to the GCR30-1100, and the GCR12-1300 sits within that range as one specific combination of payload and reach. The arm has a lightweight construction and a small footprint, and it is well suited to industries such as 3C (computer, communication and consumer electronics) and automotive. Those are environments where product variants change often, where cycle times are tight, and where floor space next to an existing line is rarely generous, which explains the emphasis on a compact arm that can be installed in any direction.
Technical Specifications
| Specification | Value |
|---|---|
| Maximum payload | 12kg |
| Reach | 1300mm |
| Repeatability | ± 0.03mm |
| Degrees of freedom | 6 |
| Maximum TCP speed | 3.8m/s |
| Maximum straight-line speed | 1.5m/s |
| Joint J1 range and speed | ±360° · 180°/s |
| IP class | IP54/IP65 |
| Communication | Tcp/Ip, Modbus/Tcp, Profinet, Ethernet/Ip |
| Tool interface | GB/T 14468.1-50-4-M6(eqv ISO 9409-1) |
| End joint I/O | 2 Dig I/O,24V,0.6A |
| Power supply | 100-240VAC 47-63Hz 10A |
| Power consumption | Typical Power Consumption 500W |
| Installation | Installed in any direction |
| Ambient temperature range | -10°C-50°C |
| Robot dimensions | 1512x388x205mm |
| Net/Gross weight | 37.8kg/46kg |
Specifications are as published by the manufacturer and are confirmed against the datasheet at quotation. The manufacturer has not published the noise level, the contents of the box, the controller dimensions for this model or the service lifetime; we confirm these with you at quotation.
How does the GCR12-1300 fit into an existing production line?
Integration begins at the network. With Tcp/Ip, Modbus/Tcp, Profinet and Ethernet/Ip on its list of communication options, the GCR12-1300 can be matched to the fieldbus that most plants in the electronics and automotive supply chain already run. That reduces the need for protocol converters between the robot and the line controller, and it allows the arm to be treated as one more device on a familiar network rather than as an island with its own rules.
The second point of contact is the tool. The flange follows GB/T 14468.1-50-4-M6(eqv ISO 9409-1), which is the reference many gripper and tool manufacturers design their mounting plates around. At the end joint, digital I/O (2 Dig I/O,24V,0.6A) allows a gripper or a simple sensor to be wired close to the tool, keeping cabling along the arm to a minimum.
Power and mounting complete the picture. The supply accepts 100-240VAC 47-63Hz 10A, with a typical consumption of 500W, so the arm can be connected to standard single-phase supplies across different facilities. Because it can be installed in any direction, the arm can sit on a pedestal, hang from a gantry or be fixed to a wall, depending on where space next to the line is actually available. With a net weight of 37.8kg, the mounting structure also stays manageable.
Is the GCR12-1300 suited to operating conditions in the Middle East?
The ambient temperature range is -10°C-50°C and the IP class is IP54/IP65. In practice, the upper end of that range is the figure to compare with your cell: many production halls in the region are air-conditioned and sit comfortably within it, whereas loading bays, outdoor-adjacent stations or unconditioned workshops may reach summer temperatures that call for local cooling or shading. The IP class should likewise be compared with the dust and splash exposure of the specific station. Our team at Robots Middle East reviews these site conditions with you before the quotation is finalised.
Who is the GCR12-1300 for?
The arm addresses four groups of buyers in particular. Electronics manufacturers and contract assemblers in the 3C sector, one of the two sectors the arm is built for, will find a compact six-axis unit suited to frequent changeovers. Automotive suppliers, the second sector it suits, can use it for handling and assembly work around existing equipment. System integrators value the range of communication protocols and the standard tool flange, which shorten the engineering effort on each project. Universities and research laboratories, finally, gain an industrial arm that also connects over common network protocols for teaching and experimentation.
Where a task points to a different combination of payload and reach, another version may be the better choice. Lighter, closer-range work may suit the SIASUN Collaborative Robot Arm (GCR5-910), while the SIASUN Collaborative Robot Arm (GCR10-1300) is a close neighbour worth comparing. For heavier or larger-scale tasks, the SIASUN Collaborative Robot (GCR16-2000) and the SIASUN Collaborative Robot (GCR20-1400) should be considered; each version's own figures are listed on its page. The full range is available in our Cobots category.
What is the GCR12-1300 used for?
- Electronics assembly: placing, inserting and fastening components on 3C production lines with frequent product changes.
- Automotive component handling: moving parts between stations in supplier plants and sub-assembly cells.
- Machine tending: loading and unloading CNC machines, presses or test benches alongside existing equipment.
- Screw driving: carrying an electric screwdriver mounted on the standard ISO 9409-1 equivalent flange.
- Quality inspection: positioning cameras or sensors repeatably over parts for visual or dimensional checks.
- Teaching and research: serving as an industrial six-axis platform in university laboratories and training centres.
Pricing and Availability
Robots Middle East supplies the GCR12-1300 on the basis of a project quotation, which allows the configuration, tooling and integration requirements of your application to be reflected accurately. Delivery, customs clearance and technical support are arranged together with the quotation. To begin, please share a brief description of your task, payload and installation site using the quotation request available on this page.
Frequently Asked Questions
What payload and reach does the GCR12-1300 offer?
The GCR12-1300 has a maximum payload of 12kg and a reach of 1300mm. Repeatability is ± 0.03mm.
Which communication protocols does the arm support?
The listed communication options are Tcp/Ip, Modbus/Tcp, Profinet and Ethernet/Ip. This allows connection to the most common industrial networks without additional gateways in many cases.
Can the arm be mounted on a wall or ceiling?
Yes. The GCR12-1300 can be installed in any direction, which covers floor, wall and inverted mounting.
Which tools can be fitted to the GCR12-1300?
The tool interface follows GB/T 14468.1-50-4-M6(eqv ISO 9409-1), so end effectors built to that flange standard can be mounted. Digital I/O (2 Dig I/O,24V,0.6A) is available at the end joint.
What power supply does the arm require?
The arm accepts 100-240VAC 47-63Hz 10A, with a typical power consumption of 500W.
What are the noise level and service lifetime?
Neither figure is available for this model, nor are the controller dimensions or the contents of the box. Robots Middle East confirms these details with you at quotation.
Where can I buy the SIASUN GCR12-1300 and what does it cost?
You can buy the GCR12-1300 from Robots Middle East, which supplies it across the Middle East. The cost depends on configuration, tooling and project scope, so it is provided in a tailored quotation that you can request through this page.
Summary
A robot arm earns its keep when it settles into a line quickly and speaks the same language as the machines already there. The SIASUN GCR12-1300 brings that readiness through its range of industrial communication protocols, a standard tool flange, a universal power supply and installation in any direction, while offering a 12kg maximum payload, 1300mm of reach and ± 0.03mm repeatability for electronics and automotive work. Developed under SIASUN DUCO with independently developed core components, it is supplied, delivered and supported in the region by Robots Middle East. For a quotation tailored to your cell, this page is the starting point.