SIASUN Heavy-Load Mobile Robot (Heavy-load mobile robot)

A heavy-duty mobile platform from SIASUN that carries the largest loads on your floor and sets them down exactly where they belong, moving in any direction without a turning radius. It is designed for plants where cranes and forklift crews have become the bottleneck in heavy material flow.

In stock

BRAND:
SIASUN
PART #:
Heavy-load mobile robot
ORIGIN:
China
AVAILABILITY:
FOR OPPORTUNITIES OVER 1 MILLION USD
SKU:
SIASUN-Heavy-load-mobile-robot

SIASUN Heavy-Load Mobile Robot (Heavy-load mobile robot)

Walking pace is rarely a selling point. For a machine carrying a load measured in tonnes, however, a steady and deliberate speed is precisely what a plant manager wants: no swing, no surprise, and a stop exactly where the load is expected. The SIASUN Heavy-Load Mobile Robot is built on that principle. It moves forward, backward, sideways or spins on the spot, needs no turning radius, and brings its load to rest with millimetre-level parking accuracy, offering a calmer alternative to cranes and forklift crews for the heaviest moves on the shop floor.

Robots Middle East sells the SIASUN Heavy-Load Mobile Robot and supplies it to manufacturers, fabricators and logistics operators across the Middle East. Our team prepares the quotation for the version that matches your load, arranges delivery to your site and remains your point of contact for support once the robot is in service.

Background

SIASUN and its heavy-duty programme

SIASUN has been developing and investing in heavy-duty mobile robots since 2009, which gives this product line well over a decade of engineering focus on a demanding niche. The manufacturer’s wider range, from assembly robots to industrial arms, can be explored in the SIASUN category. Within mobile robotics, a machine that handles a load of 5 tons or more is usually described as heavy-duty, and SIASUN’s heavy-duty platforms reach loads of 10-120 tons, with a maximum loading capacity of up to 200 tons. These are figures for the family as a whole; each version carries its own rating, set out in the table below.

Heavy-duty mobile robots exist because conventional handling scales poorly. Overhead cranes are tied to fixed rails and bays, and forklifts become unwieldy and labour-intensive as loads grow. A self-propelled platform that drives beneath or carries the load can follow whatever route the production layout requires, which is why this class of machine is found in plants that build large structures, vehicles and heavy equipment.

Omnidirectional motion and a floor-friendly wheel system

Most heavy-duty mobile robots in this family operate in all directions without the need for a turning radius. Forward, backward, sideways and spin movements are all available, so the robot can manoeuvre a long or awkward load through tight aisles and position it squarely without a sequence of shunting moves. Its wheel system must meet the requirements of both load-bearing capacity and driving force, and it must not damage the ground: a decisive point in facilities where a scarred or cracked floor becomes a maintenance cost of its own.

Guidance follows two proven approaches. Navigation is generally by magnetic navigation or laser navigation, and the speed is generally controlled at around 0.5m/s. The robots can operate independently or be integrated into production management systems, so a single unit can serve a standalone task while a larger installation can take its instructions from plant software. SIASUN’s designs adhere to ISO3691-4 standards, with safety levels engineered to PLD&E classifications.

Technical Specifications

SpecificationValue
Payload capacity, 3T Heavy-Duty Mobile Robot3 t
Payload capacity, 5T Heavy-Duty Mobile Robot5 t
Payload capacity, 20T Heavy-Duty Mobile Robot20 t
Positioning accuracy, 20T Heavy-Duty Mobile Robot±10 mm
Lifting height, 20T Heavy-Duty Mobile Robot80-100 mm
Gradeability, 20T Heavy-Duty Mobile Robot3%

Specifications as published by the manufacturer; confirmed against the datasheet at quotation.

The manufacturer has not published the dimensions, weight, battery capacity, runtime, charging method, IP rating, power supply, wireless connectivity or box contents, nor individual figures for the 60T Heavy-Duty Mobile Robot or the positioning accuracy, lifting height and gradeability of the 3T and 5T versions; these are confirmed at quotation.

How precise is a heavy-load mobile robot compared with a crane or forklift?

Precision is where this robot earns its place. Across the heavy-duty family, parking positioning accuracy of ± 5mm can be achieved, while the 20T Heavy-Duty Mobile Robot is specified at ±10 mm positioning accuracy. Either way, the load comes to rest within a margin that manual handling of a multi-tonne object struggles to match consistently, and it does so on every cycle rather than only when the most experienced operator is on shift.

The controlled speed of around 0.5m/s is part of the same argument. A heavy load that accelerates and brakes gently places less dynamic stress on fixtures and on the floor, and it gives people nearby a predictable machine to work alongside. Add movement without a turning radius, and the robot can approach a docking point square-on rather than arcing in, which is how a forklift or a towed trolley typically has to behave. The result is a handling method in which accuracy is designed into the machine rather than depending on a driver’s judgement.

Which version should I choose: 3T, 5T, 20T or 60T?

The choice begins with the heaviest load the robot will carry, including any fixture or pallet beneath it. The 3T and 5T Heavy-Duty Mobile Robots, rated at 3 t and 5 t respectively, suit component, die and pallet movements in production halls. The 20T Heavy-Duty Mobile Robot carries 20 t, lifts its load by 80-100 mm and manages a gradeability of 3%, which makes it a candidate for heavier structures that must travel across slight ramps between bays. The 60T Heavy-Duty Mobile Robot sits at the top of the named versions, intended for the heaviest loads, and Robots Middle East discusses its configuration with you as part of the quotation.

Beyond payload, consider the route. Magnetic navigation suits fixed, repeatable paths, while laser navigation is the usual choice where routes may change as the layout evolves. Whether the robot will run alone or report to your production management system also shapes the configuration discussed at quotation.

Who is the SIASUN Heavy-Load Mobile Robot for?

The first group is heavy manufacturing: makers of machinery, steel structures, transformers and large castings, whose loads are too heavy for routine forklift work and too varied in route for a fixed crane. The second is vehicle and transport equipment production, where body fixtures, chassis and sub-assemblies move between stations; buyers whose task is a dedicated assembly line may also wish to compare the SIASUN Commercial Vehicle Assembly Mobile Robot and the SIASUN Axle Base Line Assisted Assembly Mobile Robot.

A third group covers energy, petrochemical and infrastructure fabricators in the region, where modules and heavy components are built in large workshops and must be repositioned carefully. Logistics and warehouse operators handling unusually heavy goods form a fourth. For loads that sit between the 5T and 20T versions, the SIASUN 10,000 Kg Heavy-Duty Mobile Robot is worth placing alongside this product when you request a quotation.

What is the SIASUN Heavy-Load Mobile Robot used for?

  1. Die and mould changeover: moving heavy tooling between storage and presses with an accurate final position.
  2. Large assembly transfer: carrying structures or sub-assemblies from one workstation to the next.
  3. Vehicle and chassis handling: shifting bodies, frames and fixtures through assembly and inspection stages.
  4. Heavy component logistics: feeding castings, coils and machined parts from stores to the line.
  5. Workshop repositioning: relocating modules and equipment within fabrication halls without dedicated cranes.
  6. Integrated material flow: operating under a production management system as part of a scheduled, automated process.

Pricing and Availability

Every heavy-duty installation depends on the load, the route, the navigation method and the degree of integration, so Robots Middle East prepares a quotation for your specific application rather than publishing a fixed figure. Delivery, customs and support are arranged with the quotation. Share your heaviest load, your floor layout and your preferred version, and our team will respond with a configuration matched to your operation. To begin, use the quotation request available on this page.

Frequently Asked Questions

What loads can the SIASUN Heavy-Load Mobile Robot carry?

The named versions are rated at 3 t, 5 t and 20 t, with a 60T version also offered. Across the heavy-duty family, SIASUN platforms reach loads of 10-120 tons and a maximum loading capacity of up to 200 tons.

How accurately does it stop?

The heavy-duty family can achieve ± 5mm parking positioning accuracy, and the 20T Heavy-Duty Mobile Robot is specified at ±10 mm positioning accuracy.

How does the robot navigate?

Navigation is generally by magnetic navigation or laser navigation. The appropriate method for your site is agreed during the quotation.

Can it turn in a confined space?

Yes. Most heavy-duty mobile robots in this family operate in all directions without needing a turning radius, moving forward, backward, sideways or spinning on the spot.

Will it damage my floor?

The wheel system is designed to meet load-bearing and driving force requirements without causing damage to the ground.

Which safety standard does it follow?

SIASUN’s designs adhere to ISO3691-4, with safety levels engineered to PLD&E classifications.

Where can I buy the SIASUN Heavy-Load Mobile Robot and what does it cost?

You can buy it from Robots Middle East, which supplies it across the Middle East. The cost depends on the version and configuration, so please request a quotation and our team will prepare one for your application.

Summary

The SIASUN Heavy-Load Mobile Robot makes a virtue of restraint. A controlled speed, movement in every direction without a turning radius, millimetre-level stopping and a wheel system designed to spare the floor together turn the heaviest moves in a plant into routine, repeatable operations. With versions from 3T to 60T, a choice of magnetic or laser navigation and the option of running alone or under a production management system, it adapts to the load rather than forcing the load to adapt to it. Backed by SIASUN’s heavy-duty work since 2009 and supplied, quoted and supported by Robots Middle East, it is a measured answer to an unforgiving task. For a configuration matched to your load and route, this page is the starting point.

Specifications

General

BRAND SIASUN
PART # Heavy-load mobile robot

What's included

SIASUN Heavy-Load Mobile Robot (Heavy-load mobile robot)

Product Questions

No questions yet. Be the first to ask.

0/255

Write a Review
You're reviewing: SIASUN Heavy-Load Mobile Robot (Heavy-load mobile robot)
loader
Loading...

You submitted your review for moderation.