Agilex HUNTER SE

An AgileX Ackermann steering wheeled robot that drives like a car, giving autonomy teams a road-going chassis for urban testing and prototyping. Robots Middle East supplies and supports it for research groups and integrators developing their next autonomous vehicle.

In stock

BRAND:
AGILEX
PART #:
HUNTER SE
ORIGIN:
China
AVAILABILITY:
SUBJECT TO AVAILABILITY
SKU:
AgileX-HUNTER-SE

Agilex HUNTER SE

Testing a self-driving algorithm on a full-size car means a closed road, a safety driver, insurance cover and a long wait between experiments. Testing it on a scaled vehicle that steers the way a car steers needs far less, and a team can try in an afternoon what might otherwise take a month to arrange. The Agilex HUNTER SE sits in that middle ground. It is an Ackermann steering wheeled robot designed for the challenging road conditions and speed requirements of urban areas, built to offer car-like driving capabilities for high speed autonomous applications. It gives developers the kinematics of a road vehicle in a platform that can be wheeled into a workshop, reconfigured, reprogrammed over CAN and sent back out onto the tarmac the same day.

Robots Middle East supplies the HUNTER SE to universities, research centres, system integrators and enterprises across the Middle East. Our team prepares your quotation, arranges delivery to your site and provides support once the platform arrives. Questions about configuration, sensor mounting and software integration are handled by a single point of contact, from the first enquiry to deployment.

Background

AgileX Robotics and the HUNTER line

AgileX Robotics was founded in 2016. The company states that it is committed to advancing embodied intelligence innovation and accelerating the global commercialisation of robotics through its full-stack robotic technologies and open-source ecosystem. That emphasis on openness runs through its mobile platforms, which are designed to be built upon rather than used as sealed products. The HUNTER series is the company's car-like branch. The HUNTER SE power system retains the sleek design of the series and upgrades it with an all-steel body. It also adopts the latest wheeled motor structure technology, which gives the platform its top speed. Buyers comparing the wider range can browse the AgileX category for the manufacturer's other chassis and kits.

Ackermann steering on a robot chassis

Ackermann geometry is the steering arrangement found on ordinary road cars. Rather than spinning its wheels against one another to change direction, the vehicle turns its steered wheels through different angles so that each follows its own arc around a common centre. For a robot, this changes the behaviour developers must model. Motion becomes a matter of linear velocity and steering angle, and those are exactly the two quantities the HUNTER SE accepts through its external CAN bus interface. A modular design allows easy reconfiguration, and aluminium T-slot rails provide secure mounting for external sensors or kits. The result is a base that resembles a small road vehicle in how it moves and a development rig in how it is equipped.

Technical Specifications

SpecificationValue
Product typeAckermann steering wheeled robot
Speed4.8 m/s
Maximum load50 KG
Platform weight42Kg
Ground clearance120 mm
Minimum turning radius1.9m
Motors350W*2 (Brushless DC motor)
Battery24V30Ah Lithium Battery
BodyAll-steel body
SuspensionSwing arm suspension
MountingAluminium T-slot rails for external sensors or kits
Communication interfaceCAN bus; CAN2.0B standard, 500K baud rate, MOTOROLA message format
Controllable over CANLinear velocity and steering angle
ROS compatibilityROS1 / ROS2
SoftwareOpen-source SDK and software resources
Water resistanceNot waterproof

Specifications are as published by the manufacturer and are confirmed against the datasheet at quotation.

AgileX has not published the dimensions, IP rating, runtime, climbing ability, charging time, box contents, certifications or onboard sensors of the HUNTER SE; each of these is confirmed with you at quotation.

What makes the HUNTER SE different from a skid-steer robot?

Many research robots use skid steering, in which the wheels on each side are driven at different speeds and the chassis scrubs its tyres sideways to turn. That approach suits confined indoor spaces and rough ground. It is less suited to a planner written for road vehicles, because the robot does not move the way a car moves. The HUNTER SE closes that gap. As an Ackermann platform, it follows the same kinematic model that autonomous driving software assumes, so a path planner, a controller or a localisation filter developed on the HUNTER SE is working with car-like behaviour from the outset.

Speed is the second difference. At 4.8 m/s, the HUNTER SE can run scenarios at a pace that reflects real traffic on campuses, private roads and industrial estates, rather than a walking-pace demonstration. Its minimum turning radius of 1.9m is a reminder of the trade-off. Like a car, it plans its manoeuvres instead of pivoting in place, and test routes should be laid out with that in mind.

The terrain envelope should also be understood at the outset. The HUNTER SE is not designed for all-terrain use, but its swing arm suspension lets it pass common obstacles such as speed bumps, and its ground clearance is 120 mm. It is a road and paved-surface platform, and that is where it performs best. It is also not waterproof, so test plans should avoid rain, standing water and wash-down. Teams in the region should account for this when scheduling outdoor trials.

How does the HUNTER SE connect to an autonomy stack?

Integration runs through the CAN bus. The HUNTER SE adopts the CAN2.0B standard at a communication baud rate of 500K, with messages in MOTOROLA format. Through that external interface, the onboard computer sends linear velocity and steering angle commands, which is a clean, car-like control surface for any motion controller. AgileX provides an open-source SDK and software resources, and the platform is compatible with both ROS1 and ROS2. A team can therefore bring an existing ROS-based navigation stack across without changing the middleware they already use.

On the hardware side, the aluminium T-slot rails give a secure, adjustable base for LiDAR, cameras, GNSS antennas, compute enclosures or complete kits. The maximum load is 50 KG, which leaves room for a substantial sensor and compute payload on a platform weighing 42Kg. Power comes from a 24V30Ah Lithium Battery feeding two 350W brushless DC motors. Because the manufacturer does not list onboard sensors, the sensor suite should be specified as part of your quotation, and Robots Middle East can discuss the configuration with you in detail.

Who is the HUNTER SE for?

The clearest fit is the university or research institute teaching or investigating autonomous driving. These groups need a vehicle whose behaviour matches the textbook model and whose software is open enough to modify at every layer. The HUNTER SE meets both requirements, and its ROS1 / ROS2 compatibility suits both established laboratories and newer ones.

Autonomous vehicle start-ups and corporate innovation teams form the second segment. For them, the HUNTER SE is a development mule: a way to validate perception and planning software at realistic speeds before committing to a full-size vehicle programme. System integrators building prototypes for delivery, patrol or inspection on paved sites are a third group. They benefit from the modular design and T-slot rails, which let one chassis serve several customer demonstrations in turn.

The HUNTER SE is the wrong choice where the ground is soft, broken or steep, or where the robot must operate in wet conditions. Buyers with those requirements should look across the wider AgileX range, and Robots Middle East can advise on which platform matches the site.

What is the HUNTER SE used for?

  1. Autonomous driving research: developing and testing planners and controllers on a car-like kinematic model.
  2. Last-mile delivery prototyping: trialling delivery concepts on campus paths, private roads and paved forecourts.
  3. Patrol and inspection pilots: carrying cameras and sensors along fixed routes on paved industrial or institutional sites.
  4. Mapping and data collection: mounting sensor rigs on the T-slot rails to gather datasets at realistic driving speeds.
  5. Teaching vehicle dynamics: giving students hands-on experience of Ackermann control through CAN and ROS.
  6. Algorithm benchmarking: comparing navigation software on a repeatable, open-source platform before scaling up to full-size vehicles.

Pricing and Availability

Robots Middle East supplies the HUNTER SE on a quotation basis, so that the configuration, sensor package and software support reflect your project rather than a generic bundle. Tell us how the platform will be used, what it needs to carry and where it will operate, and we will prepare a proposal for your review. Delivery, customs clearance and after-sales support are arranged together with your quotation. To begin, please use the quotation request available on this page.

Frequently Asked Questions

How fast can the HUNTER SE travel?

The HUNTER SE offers a speed of 4.8 m/s, made possible by AgileX's latest wheeled motor structure technology.

How much can the HUNTER SE carry?

The maximum load is 50 KG. The platform itself weighs 42Kg.

Can the HUNTER SE be used off-road?

It is not designed for all-terrain use. Its swing arm suspension and 120 mm ground clearance allow it to pass common obstacles such as speed bumps on paved surfaces.

Is the HUNTER SE waterproof?

No, the HUNTER SE is not waterproof and should be kept away from rain and standing water. AgileX has not published an IP rating.

Does the HUNTER SE work with ROS?

Yes, it is compatible with ROS1 / ROS2. It also comes with an open-source SDK and software resources for expanded capabilities.

How is the HUNTER SE controlled?

Linear velocity and steering angle are controlled through the external CAN bus interface. It uses the CAN2.0B standard at 500K baud with MOTOROLA message format.

Where can I buy the Agilex HUNTER SE and what does it cost?

Robots Middle East supplies the HUNTER SE across the Middle East, and the cost depends on the configuration you require. Request a quotation and we will prepare a proposal that includes delivery and support.

Summary

The case for the HUNTER SE is the case for testing on something that behaves like a car, without the logistics of a full-size car. Ackermann steering, a speed of 4.8 m/s and control by linear velocity and steering angle give autonomy software the vehicle model it expects. The all-steel body, T-slot rails, 50 KG maximum load and ROS1 / ROS2 compatibility turn that model into a practical development platform. Its limits are clear: paved ground, dry conditions and planned turns. Within those limits, it lets a research group or integrator move from simulation to the road quickly and repeatedly. For a configured quotation from Robots Middle East, this page is the starting point.

Specifications

General

BRAND AGILEX
PART # HUNTER SE

What's included

Agilex HUNTER SE (HUNTER SE)

Product Questions

No questions yet. Be the first to ask.

0/255

Write a Review
You're reviewing: Agilex HUNTER SE
loader
Loading...

You submitted your review for moderation.