Unitree B2 Quadruped Robot

An industrial legged robot built to carry sensors and equipment through heat, dust, stairs and broken ground where wheeled machines and people struggle. It suits inspection, security and research teams that need a robot able to work outdoors for a full shift.

In stock

BRAND:
UNITREE ROBOTICS
PART #:
B2
ORIGIN:
China
AVAILABILITY:
SUBJECT TO AVAILABILITY
SKU:
Unitree-B2
AED 378,267.91
Free Shipping
Loading...

Unitree B2 Quadruped Robot

At midday in a Gulf summer, an outdoor inspection round is less a walk than an endurance test: heat shimmering over the pipe racks, fine dust settling in every gap, steel stairs too hot to touch. Most legged robots are introduced in laboratories and only later asked to cope with conditions like these. The Unitree B2 Quadruped Robot w starts from the other end. Unitree Robotics gives it IP67 ingress protection and an operating range from -20℃ to 55℃, then adds a 2250Wh battery, a 3D LiDAR and enough joint strength to climb 40cm stairs with equipment on its back. It is an industrial machine first and a development platform second, and that order of priorities shapes everything about it.

Robots Middle East sells the B2 to organisations across the Middle East, from energy and utility operators in the Gulf states to research institutions and system integrators throughout the region. Robots Middle East prepares each quotation around the configuration a project needs, arranges delivery to site and remains the point of contact for technical support once the robot is in service.

Background

Unitree Robotics and its quadruped lineage

Unitree Robotics, based in Hangzhou, China, has spent years building four-legged robots that range from compact consumer and education models to heavier platforms intended for commercial work. The company released the B2 on 3 November as a new industrial quadruped robot, positioning it at the demanding end of its range. Where the smaller models are often bought for teaching, demonstrations and software research, the B2 is aimed at real sites: plants, tunnels, perimeters and terrain where a robot is expected to carry sensors for a full working shift. Buyers comparing it with other legged platforms will find the wider range in our Standard Quadrupeds category.

An industrial body with a developer's computer on board

The B2 separates the work of keeping itself upright from the work its owner wants it to do. In the standard configuration, an Intel Core i5 handles platform functions, while a second computer, an Intel Core i7, is reserved for user development. Further computing options include an Intel Core i7 or an NVIDIA Orin NX, which matters to teams running perception or AI models at the edge. Around this sit four gigabit Ethernet ports, four USB3.0 ports and a set of 12V, 5V, 24V and battery power outputs, so cameras, gas sensors, radios or manipulators can be wired directly to the robot. Software is maintained through continuous OTA upgrades and updates, and the sensor suite of one 3D LiDAR, two depth cameras and two optical cameras varies with the configuration chosen.

Technical Specifications

SpecificationValue
Size (standing)≈ 1098mm×450mm×645mm
Size (lying prone)≈ 880mm×460mm×330mm
Weight≈ 60kg total weight (battery included)
Battery45Ah (2250Wh), voltage 58V
Battery life4-6h
Walking without load> 5h, mileage > 20km
Walking with 20kg load> 4h, mileage > 15km
Running speed> 6m/s
Max joint torqueAbout 360N.m
Load (standing)≥ 120kg
Load (walking)> 40kg
Max jump distance> 1.6m
Climbing angle> 45°
Stair climbingUp and down stairs of 40cm in forward direction
Operating temperature-20℃ ~ 55℃
Ingress protectionIP67
Sensors3D LiDAR ×1 + Depth camera ×2 + Optical camera ×2 (varies with configuration)
Computing (standard)Intel Core i5 (platform function), Intel Core i7 (user development)
Computing (optional)Intel Core i7 or Orin NX
External interfaces1000M-Base-Ethernet×4, USB3.0×4, 12V×4, 5V×1, 24V×4, BAT×1
Charger58.8V 10A
WirelessWiFi 6, Bluetooth 5.2

Specifications are as published by the manufacturer and are confirmed against the datasheet at quotation.

Unitree has not published the payload mounting interface, the charging time, the noise level, the degrees of freedom or the contents of the box; each of these is confirmed at quotation.

Can the Unitree B2 work in the heat and dust of the Gulf?

For buyers in this region, the environmental figures are usually the first ones to check, and the B2 answers them directly. Its operating range reaches 55℃ at the top end and -20℃ at the bottom, which covers most outdoor working conditions across the Middle East, including cold nights in desert and mountain areas. The IP67 rating describes an enclosure that is dust-tight and protected against temporary immersion in water, which is what keeps fine sand out of joints and electronics and lets the robot be hosed down after a dusty round.

Planning still matters. On sites where surface or ambient temperatures can climb past the published range in high summer, operators typically schedule patrols for early morning and evening, which suits the long battery life well. The robot's ability to climb slopes steeper than 45° and to take 40cm stairs in its forward direction means that loose embankments, raised platforms and plant stairways do not force a change of route, and the jump distance of more than 1.6m gives it room to clear gaps and trenches on construction or pipeline sites.

How much can the B2 carry, and for how long?

Strength and endurance are where the B2 separates itself from lighter quadrupeds. It supports at least 120kg while standing and carries more than 40kg while walking, driven by joints delivering about 360N.m of torque. With a 20kg load, which is enough for a substantial sensor package, it walks for more than 4h and covers more than 15km; unladen, it manages more than 5h and over 20km. The overall battery life is 4-6h depending on the task.

Those hours can be extended in practice. The battery supports quick change, so a spare pack turns a single robot into one that works through a long shift with only short pauses, and autonomous charging solutions are available as an option for fixed inspection routes where the robot returns to a dock on its own. For an operator, this is the difference between a robot that performs a demonstration and one that can be rostered.

Who is the Unitree B2 Quadruped Robot w for?

The clearest fit is the industrial operator: oil, gas and petrochemical facilities, power and water utilities, mining sites and large infrastructure projects where routine inspection rounds are long, repetitive and sometimes hazardous. These teams value the IP67 enclosure, the load capacity for thermal cameras and gas detectors, and the endurance to finish a full route.

Security and facilities managers responsible for perimeters, warehouses and campuses form a second group, using the B2 for patrols that continue through the night. Public safety and emergency services evaluating robots for search, reconnaissance and hazardous-area entry are a third. Universities, research centres and integrators make up the fourth: the dedicated user development computer, the optional Orin NX and the extensive interfaces make the B2 a serious platform for work on autonomy, perception and legged locomotion.

Some buyers will be better served by a related package. Teams that want navigation hardware included from the outset can consider the Unitree B2 Quadruped Robot with Navigation Kit Package. Where routes are long and mostly flat, such as paved industrial estates, the wheeled Unitree B2-W Wheeled Quadruped Robot deserves a comparison, and a complete B2-W kit with battery and navigation kit is also available. Robots Middle East can advise on which version best matches a given site.

What is the Unitree B2 Quadruped Robot w used for?

  1. Plant inspection: carrying thermal, acoustic or gas sensors along refinery, substation and pumping-station routes.
  2. Perimeter and site security: running scheduled patrols around compounds, depots and construction sites.
  3. Emergency response: entering smoke-filled, flooded or structurally uncertain areas ahead of personnel.
  4. Load carrying: moving tools, instruments and supplies over stairs and rough terrain where trolleys cannot go.
  5. Mapping and surveying: building 3D maps of tunnels, plants and outdoor sites with the onboard LiDAR and cameras.
  6. Research and development: serving as a robust testbed for autonomy, perception and AI algorithms in real environments.

Pricing and Availability

The B2 is supplied by quotation rather than from a fixed list, because choices such as the computing option, the sensor set, wheeled feet, spare batteries and autonomous charging all shape the final package. Robots Middle East reviews the intended application with each buyer and returns a quotation that reflects the configuration actually required. Delivery, customs clearance and after-sales support are arranged together with the quotation, so the robot arrives ready for commissioning. To begin the process, the quotation request for the Unitree B2 is available on this page.

Frequently Asked Questions

Is the Unitree B2 waterproof and dustproof?

The B2 carries an IP67 rating, which means it is dust-tight and protected against temporary immersion in water. This makes it well suited to dusty desert sites and to cleaning after outdoor work.

Can it operate in summer temperatures in the Middle East?

Its operating temperature range is -20℃ to 55℃. For the hottest periods, many operators schedule rounds in the cooler hours of the day to stay comfortably within that range.

How long does the battery last?

Battery life is 4-6h, with more than 5h of walking unladen and more than 4h with a 20kg load. The battery supports quick change, and autonomous charging is available as an option.

Can the B2 climb stairs?

Yes. It climbs up and down stairs of 40cm in its forward direction and handles slopes steeper than 45°.

Is it suitable for software development?

The standard configuration includes an Intel Core i7 dedicated to user development alongside the platform computer, with an Intel Core i7 or Orin NX available as options. Four gigabit Ethernet ports, four USB3.0 ports and several power outputs support custom sensors and payloads.

Is a wheeled version available?

Wheeled feet are optional for the B2, and Unitree also offers the B2-W as a dedicated wheeled version. Robots Middle East can help compare the two for a specific route.

Where can I buy the Unitree B2 Quadruped Robot w and what does it cost?

Robots Middle East supplies the B2 across the Middle East. The cost depends on the configuration chosen, so please request a quotation on this page and the team will prepare one for your project.

Summary

The B2 makes sense in exactly the places where a laboratory robot would falter: hot, dusty, stepped and long. An IP67 enclosure, an operating range up to 55℃, a 2250Wh quick-change battery and the strength to walk with more than 40kg turn the heat-haze inspection round from a test of endurance into a scheduled task. Its separate development computer, optional Orin NX and generous interfaces leave room for the sensors and software each operator needs. For organisations in the region planning to put a legged robot to work outdoors, Robots Middle East can tailor the configuration, and this page is the starting point.

Specifications

m/s
Max Speed
kg (88.2 lbs)
Payload
up to hours
Runtime

General

BRAND UNITREE ROBOTICS
PART # B2
ROBOT TYPE QUADRUPED
FCC APPROVED Yes
FCC ID 2A5PE-YUSHU006

Performance

MAXIMUM SPEED 6 METERS / SECOND
PEAK KNEE TORQUE 360 N.M
MAXIMUM PAYLOAD 40 KG (88.2 LBS)
SLOPE ANGLE 45 DEGREES
STAIR CLIMBING HEIGHT 25 CM
OPERATING TEMPERATURE -20°C TO 55°C
INGRESS PROTECTION IP 67

Sensors

3D LIDAR EQUIPPED

Software

SECONDARY DEVELOPMENT SUPPORTED

Battery + Power

RUNTIME UP TO 6 HOURS

Feature

(a) Hardware platform
● Weight (with battery): about 60kg;
● Length, width and height (when standing): about 1098mm*450mm*645mm;
● Endurance: continuous walking with no load, the endurance is more than 20km and the endurance is more than 5 hours; continuous walking with a load of 20kg, the endurance is more than 15km and the endurance is more than 4 hours
● Can be up and down a stairs of 40cm in the forward direction
● Continuous walking load capacity ≥ 40kg
● The fastest speed of 5m/s
● Battery capacity of 45Ah, rated energy 2250Wh, maximum support for 15A charging                                                                                            
(b) Sensing module
● Built-in multi-group depth camera, multi-group high-definition camera                          
● Ignore the terrain, combined with the perception of real-time switching gait and landing point

What's included

Unitree B2 (B2)

Product Questions

No questions yet. Be the first to ask.

0/255

Downloads

BROCHURES
(Size: 4.3 MB)
Write a Review
You're reviewing: Unitree B2 Quadruped Robot
loader
Loading...

You submitted your review for moderation.